20 best car holders from Aliexpress

There are different types of holders on the site: suction cup brackets, vent clips, handlebar straps and sticky silicone mats (flexible panel). The device itself can be attached in different ways: using a U-shaped stand with “paws”, conical clips, magnets. In terms of quality, products from Aliexpress are in no way inferior to more expensive devices from domestic stores. Of course, ideal holders, like universal cars, do not exist. However, there are requirements that any good holder for phones, phablets and tablets must meet:

• securely hold the device in the desired position;
• allow you to quickly install and remove the gadget with one hand;
• have high quality (good materials and decent assembly);
• do not restrict the use of the gadget itself (do not close ports and connectors);
• do not interfere with driving and do not impair the driver's view;
• match the design to the interior of the car;
• allow you to charge your device on the go;
• be affordable.

When choosing, pay attention to the location of the buttons / connectors of the gadget, its weight and dimensions, in which case the device “lives”, and to the features of the car interior.

Overview of different types of car phone holders

The best car phone holders from AliExpress

Some of the most popular holders on AliExpress are suction cup models. They are easy to install, do not leave marks in the cabin after installation and removal, and allow multiple reinstallation. They are usually installed on the windshield. However, if the glass slope is large, installation and operation can be complicated. Holders on fasteners that are installed on a salon mirror or deflector are considered more versatile. Sometimes non-slip mats are used as a holder. They are inexpensive, do not block the view, but not all models can hold the phone in an upright position. It is worth considering all these pros and cons when choosing the best phone holder.

5 SYRINX Car phone holder

SYRINX differs from similar holders in cars with Aliexpress in an unusual way of fastening. Instead of glue, adhesive tape, suction cups and magnets, a reliable bracket is installed here, the width of which can be adjusted. With it, the phone is fixed to the rear-view mirror, seat backs and other suitable surfaces. This option will be the best solution for residents of cities with bad roads, because the risk of the gadget falling out during the trip is minimized.

Like most models from Chinese manufacturers, the holder is made of ABC plastic and metal.Smartphones with a screen of 4-6.1 inches will fit inside, they will not be scratched thanks to a layer of soft material. Judging by the reviews, the design is quickly assembled and disassembled, conveniently rotates 360 °. The quality of the assembly and plastic is close to ideal, the nuts are tightened tightly. The only drawback was the mount to the mirror - it is not suitable for all cars.

4 IRONGEER Phone Holder in Car

The holder from IRONGEER resembles a huge clothespin that is attached to the dashboard of a car. It is held on the surface, clasping the phone on both sides. For better reliability, durable rubber bands are provided here. The product is suitable for gadgets with a width of 3.5-6.5 inches, so it is unlikely to be used as a tablet stand. Clamp extends up to 25mm. If the dashboard is too thin, non-slip pads can be placed inside the clip. There are two versions of the model on Aliexpress - with and without a 360 ° hinge. Unfortunately, only the second option is currently available.

The reviews say that the holder is made of high quality, it is suitable for most cars. The phone is securely fixed, does not move during the trip. The disadvantages of IRONGEER include long delivery and poor packaging. It happens that the goods never reach the buyers, but in such cases the seller always returns the money.

3 ESVNE 003

Classic and time-tested phone holder with suction cup, fits almost all cars.It can be installed on the glass or on the dashboard. There is a place for such a compact little thing in the cramped small car, and in a car stuffed with various innovations. Vacuum suction cup firmly fixes the holder on any surface. It is coated with a special gel that makes adhesion to the base as reliable as possible. You can detach the holder by pressing the button on the case.

The model "makes friends" with phones of almost any size. You can rotate the gadget 360 degrees. The holder looks neat. You can choose a color - the seller from Aliexpress offers as many as 7 designs. In terms of price and quality ratio, this is one of the best options on the suction cup.

2 Speeding Road Car holder for phone

Holders in the form of rugs are an interesting solution for those who have a bunch of useful things in the car. Made from safety silicone, this model from Speeding Road is approx. To fix the gadget, manufacturers have provided a rotating mount with paws. Another interesting feature is the numbers to indicate your phone number in case of inconvenient parking.

AliExpress users regularly praise the sticky car organizer. It does not fly off the dashboard, all items also adhere well to the surface. Of course, it is better not to place the largest phones on a stand, but for lightweight gadgets, the holder is quite suitable.As for the shortcomings, the main ones were small bumpers and numbers, as well as the lack of an adhesive base on the mat.

1 Baseus Tank Gravity Car Mount Holder with Suction Base

Car holders from Baseus often become leaders in the number of orders and reviews on AliExpress. This solid aluminum alloy device is suitable for smartphones with a screen size of 4.7-6.5 inches. Its parameters are 110*100*170 mm.Thanks to the hinges, you can change the tilt angle within 180–360°, which is convenient for using the gadget as a navigator. The paws of the model are adjustable, a strong suction cup is used for reliable fixation. The seller is convinced that even on the steepest turns the phone will hold up perfectly and will not fall out of the mount.

The reviews mention the best fixation and workmanship of Baseus. Modern smartphones can easily fit inside, it is convenient to get them with one hand. Most often, buyers place the holder on the dashboard or windshield. If you plan to move the suction cup from one place to another, you should use double-sided tape, as the glue dries quickly.

The best holders for tablets and phablets from AliExpress

Phablets with a diagonal of 5.5 inches and tablets with a screen of 7 inches or more are installed in the car using holders with different mounting options - suction cups for the windshield and dashboard, magnetic heads for mounting on a CD slot, classic clips. If passengers will use the tablet, you should pay attention to models that are mounted on headrests.

5 3C Digital Electronic Zhuanchanpinsiquanjia

According to the principle of operation, this car holder practically does not differ from analogues: it also has four tabs and an anti-slip coating for holding the tablet. Usually, the stand is mounted on the headrest, so that only passengers can enjoy watching movies. Inside fit a gadget with a diagonal of 7 to 10 inches. The seller specifies that the smallest tablets must be placed horizontally, otherwise they will not hold.

The reviews write that 3C Digital Electronic is suitable not only for tablets, but also for large phones, such as the iPhone 6 Plus. A significant drawback of this model, Aliexpress users consider the incomplete package. Sometimes the seller sends kits without a connecting nut. Because of this, the holder cannot be fixed in the car, the tablet simply will not hold. Another disadvantage is unreliable packaging. The product comes in a regular package, it may be damaged during transportation.

4 Enjoying+QI Mount Holder Stand

The holder for tablets and smartphones on suction cups is the most budgetary solution for a car. The Enjoying + QI store has a good option made of hard plastic. It rotates 360°, can be mounted on the windshield and other surfaces. Long flexible handle allows you to place the gadget at any angle. This model is suitable not only for phablets, but also for a GPS navigator. There is only one limitation - the length or width of the device must be between 125-205 mm.

Judging by the reviews, the holder is suitable for tablets with a diagonal of 7-11 inches, regardless of the manufacturer. The suction cup holds well on the glass, the fastening is of sufficient quality, there are no backlashes. Thanks to the rear latches, the gadget will not fall out of the stand, but phablets that are too heavy can move. Despite this, buyers from AliExpress advise Enjoying + QI, because the quality of the product corresponds to the price. Another plus is lightning fast delivery.

3 YNMIWEI Universal

This holder is installed on the pins of the head restraints of the passenger and driver seats. A small telescopic rod with a tablet cradle is mounted between the seats. The holder is easily adjusted to work in any vehicle with adjustable head restraints. It can be moved along the bar, fixing it in the position desired by users.

The spring mechanism of this model provides reliable fixation of gadgets even in difficult conditions. Mounts are adjustable and fit all types of headrests. The tablet can be rotated 360 degrees. The paws have rubber pads. The center cushion is also relatively soft. In terms of quality, Aliexpress users have no complaints - this is an excellent holder at a reasonable price.

2 ASOMETECH For iPad Tablet Holder Stand

The ASOMETECH holder is installed on the back of the front seat of the car. It supports the tablet from above and below and can rotate 360°. The description on Aliexpress says that this model is designed for gadgets of any size, but their diagonal should be within 7-11 inches. The surface of the product is rubberized for better grip with the back panel of the phablet. The maximum dimensions of the holder when unfolded are 135*270*95 mm. The body is made of plastic.

Most often, positive reviews about ASOMETECH appear on AliExpress. Installing the holder will not take much time, especially since the instructions with photos are on the website. The assembly corresponds to the price, the plastic is quite strong. But the quality of the bracket did not satisfy all buyers. It is flimsy, because of this, the tablet constantly leans during a trip to the car.It is not recommended to use the device for games and calls, as it may fall out due to vibration.

1 QXUZZOFB R-047

QXUZZOFB R-047 is a universal car holder suitable for tablets, navigators, PSP, MP5 and other devices. It attaches to any surface with a suction cup. Gadgets are held at the top and bottom thanks to adjustable clips (tablet height should be within 12.5–20 cm). The stand can be rotated 360° and tilted to different angles. The range includes holders in red, blue and black, they look very stylish and unusual.

The reviews write that QXUZZOFB R-047 is perfect for the car. The suction cup sticks well to the corrugated panel, you can glue the stand on other surfaces. The bracket is strong and easy to adjust. During the trip, the holder hardly moves, but this depends on the quality of the road. The disadvantages of buyers from Aliexpress include a crumpled box and not very durable plastic. The design seems flimsy, but it successfully copes with tablets of different sizes.

Best magnetic phone holders from AliExpress

The action of models from this category is based on the properties of a powerful neodymium magnet. It attracts the gadget and fixes it on the dashboard. If the case of the device is not metal, you will have to install a special ring or pad on the case. Magnetic holders look stylish - no "legs" and mounts, but while moving the phone can change its position. Another disadvantage is that devices are installed, as a rule, on double-sided tape, which means that they cannot be moved around the panel.But magnetic holders have significant advantages - this is the compactness and ease of installation of the gadget - the phone is placed and removed from such a stand with one hand.

5 Redtree Magnetic Car Air Vent Mobile Phone Holder

The holder in the car from Redtree can be safely considered one of the best-selling models on Aliexpress. This miniature stand has been ordered almost 2,000 times, and customers have left more than 3,500 grateful reviews. The device is attached to the ventilation grill, it holds the phones with the help of four miniature magnets. The body is made of aluminum alloy and is available in 4 glossy colors: silver, black, gold and pink. A nice bonus - metal plates can be ordered separately.

The reviews praise the quality of the product. The Redtree holder is tightly fixed, the magnet holds even heavy phones. The tines are rubberized and can be installed in two different positions depending on the thickness of the grill teeth. The most significant drawback of the product is a very long delivery. Also, some buyers found the design of the holder boring: there are no drawings on the surface, there are few colors in the assortment.

4 FLOVEME Car Phone Holder

FLOVEME differs from traditional magnetic coasters in the car with its unusual design in the shape of the letter "L". The product weighs a little, it can be easily installed with one hand on the ventilation grill of a car. The surface for the phone is large, there are five magnets inside.Thanks to a weighty clothespin, it will be possible to use the holder not only for a smartphone, but also for a tablet with a diagonal of no more than 7 inches. The angle of inclination is slightly adjustable, within 15 °.

Before buying, you should pay attention to the size of the stand, because in the photo it seems larger than in reality. The width is 36 mm, the thickness of the clothespin is 11.5 mm. AliExpress users note in reviews that the magnets are very powerful, they hold the phone even through a silicone case. The clothespin is quite tight, there are no backlashes. Even on bad roads, the holder does not move, the gadget remains in place. The only disadvantage of FLOVEME is that delivery is sometimes delayed.

3 GETIHU Magnetic Phone Holder

The best choice for those who value compactness and do not like cluttered gadgets in the car. This holder does not block the view, because it is attached to the ventilation deflector grille. The clip with magnet is very compact. It does not spoil the interior, it is practically not noticeable in the car. The device does not attract the attention of those who like to improve their financial situation at the expense of even inexpensive accessories from someone else's car - a big plus in our time.

The magnet itself holds the phone very well even when shaking. The kit comes with two plates for gluing on a smartphone - round and rectangular. The popularity of the model is evidenced by thousands of sales on Aliexpress. Buyers write that even on bad roads, it does not allow the phone to fall. And this is the best compliment for the holder.

2 Cafele Magnet Car Holder

In the nomination “the brightest and most colorful holders”, products from the Cafele brand are confidently leading. Their popular 360-degree magnetic holder is popular with buyers on AliExpress. The magnetic platform has a diameter of 50 mm, rotates in a ball mechanism and is sold in 5 colors (pink, red, black, blue and white). So you can choose the right option for the interior design of the car. The holder has a respectable appearance, it comes with 2 magnets (platforms for phones) and adhesive tape for installing the holder itself.

Customers really like the appearance of the product, ease of installation and use. Of the minuses - not the lowest price compared to competitors. But many agree to pay not only for quality, but also for beauty.

1 Oppselve Universal Metal Magnetic Car Phone Holder Stand

This car holder has become a real discovery in 2021. Despite its compactness, it is suitable even for overall phones, because there are as many as 6 powerful magnets inside. The device rotates 60° vertically and 360° horizontally. The product is available in two colors, its dimensions are 6.9 * 0.5 cm. The body is made of durable and high-quality zinc alloy. Silicone pads will not scratch the back of your smartphone. Metal plates can also be ordered separately.

AliExpress shoppers love the versatility of the Oppselve holder. The product is regularly ordered for the car, home and office. The build quality is good, gadgets are attracted even through the case. Obviously, the holder should not be used for tablets.Also in the reviews they note that the hinge may not withstand the phone on bumps, despite strong magnets. For country trips, it is better to use another option.

The Best Wireless Charging Holders from AliExpress

Recently, car holders have been increasingly appearing on Aliexpress, with which you can charge your phone. This is really convenient, because smartphones are often used as a navigator. With such a device, it will be possible not to worry about the remaining charge level even during the longest trip by car. The device connects directly to the cigarette lighter and uses Qi Wireless Fast Charging technology. Some holders come with a cable, this option is suitable for phones that do not support wireless charging.

5 KISSCASE 251AK0001

KISSCASE 251AK0001 is a stylish car holder with power up to 10W. It comes in three colors: silver, gold and black. To hold the phone, rounded "legs" are used, the width of which is automatically adjusted. The panel itself is glossy and rotates 360° for a better viewing angle. At the bottom of the device is an LED indicator that shows the battery level. The efficiency is 75%, the operating frequency is from 110 to 205 kHz.

Customers like the fact that the holder automatically adjusts to the size of the smartphone. As soon as the gadget is on the charging panel, the “legs” wrap around it from all sides. Due to this, the most tight retention is ensured even on steep turns.The reviews praise the appearance of KISSCASE 251AK0001, although the workmanship is not ideal. Some parts are flimsy and can fail quickly. Another disadvantage is the noise during operation.

4 FDGAO Fast Gravity Wireless Car Charger

The FDGAO holder is suitable for most iPhone and Samsung models. The product is fixed on the air vent, the phone clips are located on the sides and bottom. Thanks to the swivel joints, you can rotate your smartphone and place it at any convenient angle. Also included is a silicone suction cup for mounting on the windshield or dashboard. For wireless charging, you need to place the gadget at a distance of no more than 8 mm from the holder. The maximum output power is 10 W, the voltage is 9 V. The device can fully charge the phone in just 2.5 hours.

One of the advantages of FDGAO is safety and reliability. It provides protection against excessive current, overheating and overvoltage. The seller claims that the gadget will work even after a lightning strike. The reviews write that the product is well made and holds the smartphone well, but the charging speed leaves much to be desired.

3 QiChow PH0012

QiChow PH0012 is available in several colors, on AliExpress there are versions of this model for iPhone and Android. The output power of the device reaches 10 W, there is support for fast charging using QC2.0 technology. The body is made of plastic and aluminum, the holder is mounted on the ventilation grille. The width of the smartphone should be between 4-6.5 inches.The clips lock automatically, and you only need to press one button to unlock them. Another advantage of the holder is that, if necessary, you can easily buy spare parts: a mount with a suction cup or a plug for connecting to the cigarette lighter.

There are no complaints about the quality of the product in the reviews: the holder is strong and reliable, the smartphone will not be able to slip out during a trip on a rough road. The connection is instantaneous, charging is fast enough, the signal passes even through the case. Except for the crumpled box, the QiChow PH0012 has no serious drawbacks.

2 BASEUS Wireless Charger

BASEUS is a powerful car holder with 15W wireless charging. This is enough to charge a smartphone by 50% in just an hour. The device is mounted on the ventilation grill, car dashboard or windshield. For the manufacture, plastic and acrylic were used, the width of the clamp is adjustable within 7-10 cm. The height of the base can also be changed, there are 5 levels to choose from. Thanks to an infrared sensor, the holder independently determines the size of the phone and fixes the clips in the right place.

The seller warns that the device only outputs 15W for some phone models. Everyone else will have to be content with the standard 5-10 watts. Despite the excellent workmanship and workmanship, the BASEUS holder has one significant drawback - it has the highest price on AliExpress. But the seller offers fast delivery from Russia, in addition, the store often has promotions and discounts.

1 Joyroom JR-ZS212

The Joyroom JR-ZS212 car holder will charge your phone even at a distance of more than 8 mm. The device delivers power up to 15 W and restores the battery by 60% in an hour. It uses a smart double chip and a copper coil, due to which charging is as fast and safe as possible. The holder measures 9.6*8.8*1.7cm and weighs approximately 150g. The product is suitable for smartphones with a width of 4.7-6.5 inches. Thanks to a powerful capacitor, the device will work without electricity for several more minutes. Even after the car has stopped, you can remove the phone from the holder. On sale there are versions with a mount for a ventilation grill or dashboard.

The reviews on Aliexpress note the high build quality of the Joyroom JR-ZS212. In operation, the holder performs perfectly: it is easily controlled with one hand, quickly connects to a smartphone and charges it. The product comes without damage and marriage, although the box is sometimes wrinkled.

Popular vote - who is the best manufacturer of car holders presented on AliExpress?
Vote!

GETIHU

ORICO

BASEUS

Cafele

PZOZ

Ugreen

ESVNE

Cobao

YNMIWEI

Xinmanrou

QXUZZOFB

Voulttom

3C Digital Electronics

FLOVEME

Redtree

Enjoying+QI

ASOMETECH

IRONGEER

joyroom

QiChow

FDGAO

KISSCASE

speeding road

SYRINX

Oppselve

Total voted: 145

Vote results