10 tips for choosing an orthopedic mattress

All mattresses with orthopedic properties are divided into 2 groups:

Springless. The inner part of such products is made of elastic, but at the same time elastic material (for example, latex or cotton). This category includes air mattresses as well as flotation mattresses filled with water. Springless products are very comfortable to use.

Spring. Depending on the design, these mattresses are divided into two large groups, each of them has characteristic features:

• Dependent (“bonnel”). These springs are shaped like traditional barrels, tightly connected to each other. Products equipped with dependent blocks do not have stiffness zones, so over time they deform and creak;
• Independent. Their design is made of a huge number of independent springs.They are not connected in a single frame, so they provide excellent support for the spine, even in older people. Such products do not create the effect of "waves", which is especially important for double beds.

To choose a mattress equipped with an independent block, consider the number of springs per 1 m². The more of them, the more comfortable the product is to use. Standard number - 256/m². Most inexpensive mattresses are equipped with exactly this number of springs.

However, you can choose new generation models. They have a special "multipack" unit, in which the number of springs reaches 500 / m². They are much more convenient and comfortable to use. In addition, there are mattresses with an orthopedic “micro” block, in which the number of springs is 1000 / m².

The type of filler used determines the degree of rigidity of the mattress, as well as other important characteristics: elasticity, resistance to deformation and ease of use.

The most common materials used as fillers are:

Latex. A natural material made from the juice of rubber plants. Its characteristic feature is increased elasticity, so it is used to fill soft mattresses and products of medium hardness.

Coconut coir. It provides the optimal balance of stiffness and comfort. The material does not interfere with air circulation and does not lose its shape over time. Most manufacturers use coir pre-treated with latex to fill mattresses.

Wool. It has excellent thermal insulation properties, therefore it is usually used in double-sided products (“winter-summer”).The wool fiber makes the springless mattress more resilient, warm and comfortable.

Seaweed. 100% ecological filler with excellent orthopedic effect. Dried algae contain iodine and other useful elements, thanks to which rest on the mattress will be not only comfortable, but also as healthy as possible.

Cotton. It is pre-processed to the state of the thinnest cobweb, which is then folded into several layers. Cotton fiber is the best insulation that can make a mattress soft and very comfortable.

High-tech polyurethane foam. Memory filler that remembers the contours and contours of your body. It provides excellent support for the spine as well as the muscles without obstructing blood circulation.

The cover is an integral part of every mattress. It determines not only the appearance of the product, but also its orthopedic properties. The cover consists of several layers: outer fabric, inner filler and durable lining.

The most practical covers are made of jacquard, which is characterized by high density and rigidity. If you prefer softer products, then choose models from knitted materials. Judging by the reviews, they are easily erased and are highly wear resistant.

When buying an orthopedic mattress, immediately choose a mattress topper. It plays the role of a second cover, protecting the product from dirt, water and premature wear. The mattress cover is fixed with special elastic bands located in the corners of the mattress, or closed on the sides.

We recommend choosing a second cover made of waterproof fabric (especially relevant for newborns and preschool children).Mattress toppers can be easily removed and washed at home, so they are suitable even for those who suffer from allergic reactions to dust.

Buying an orthopedic mattress is a difficult task, because when choosing it is important to take into account your own height, physique, age, and even health status:

Newborns, toddlers and preschool children. The best solution is a hard mattress filled with natural fiber. Choose only springless models. It is great if the product is equipped with handles that provide easy removal and flip.

Teens and adults under 25. All this time, the human body grows and develops, therefore, to form the correct posture, we recommend choosing hard or medium-hard mattresses. They provide better support for the spine.

adults. For people 25 years and older, you should choose a mattress based on your own preferences. No specific age requirements apply.

Elderly. The older the person, the softer the mattress should be. Experts recommend that older people choose soft orthopedic products. They will provide a good rest without discomfort and pain in the back.

Width. One of the most important indicators in the selection of an orthopedic mattress. Conventionally, all models are divided into single and double. There are many variations of width: from 80 to 200 cm. By personal order, products of atypical sizes can be made.

The standard width of economical single mattresses is 80 cm, double mattresses - 140 cm. In order not to feel cramped during sleep, we recommend choosing products with slightly larger parameters (on average, + 10-15 cm to the standard width).

If you are used to taking up maximum space while relaxing, then pay attention to single mattresses 120 cm and double 200 cm. Of course, measure the width of your bed before buying.

Length. The most common parameters are: 200, 195 and 190 cm. An indicator of 200 cm is considered a universal length for double beds. Non-standard parameters are found in the lines of a few manufacturers and range from 120 to 140 cm.

Note! To make your stay as comfortable as possible, we recommend choosing orthopedic mattresses, the length of which is at least 10 cm longer than your height.

Diameter. This parameter is important for round mattresses. The most universal diameter is 220 cm (for a double bed). The remaining parameters are less common, it is difficult to find them.

How stiff the product will feel for you is largely determined by your weight. It is more comfortable for thin people to sleep on a soft mattress, but for more overweight people, rigid orthopedic structures are perfect.

If you cannot decide, experts recommend choosing models with several stiffness indicators, i.e. one zone of such mattresses is much softer than the second. An excellent option is also for those situations when two people are resting on a double bed, having a significant difference in weight or physique.

Height is one of the key criteria that is important to consider when choosing the perfect orthopedic mattress.As a rule, the thickness of one-sided products without a spring block is less than that of two-sided (“winter-summer”) models.

The higher the mattress, the more comfortable it is to lie on it. Experts explain this by the fact that under the weight of a sleeping person, the product bends, and the deeper the deflection, the more comfortable the rest. Naturally, a high mattress sags many times more than a low one.

Manufacturers offer models of any height: from 3 to 30 cm. Products with a minimum thickness (3-4 cm) are usually used as mattress toppers. Models with a height of 8-10 cm or more are recognized as full-fledged mattresses.

When buying an orthopedic mattress, you must take into account the weight allowed for 1 bed. Manufacturers always indicate it in the instructions, meaning this value for one person in a double bed.

We recommend choosing mattresses with a load capacity of at least 10 kg more than your weight. For example, if you weigh 70 kg, then the maximum load should be at least 80 kg. Neglecting this parameter, you risk the durability of the mattress.

A quality mattress will never be cheap. The materials used in its manufacture meet the requirements of wear resistance and reliability. For this reason, their purchase requires large investments and must be justified.

The average cost of mattresses equipped with an independent spring unit starts from 10,000 rubles. However, keep in mind that the use of higher quality natural fillers and an increased number of springs per 1 m² significantly increases this value.

Double mattresses made of polyurethane foam without springs will cost 10,000-12,000 rubles. The cost of good models with latex filling starts from 15,000 rubles. For 5,000-7,000 rubles. mattresses will be more expensive, in the manufacture of which a combination of several materials is used.

High-quality orthopedic mattresses can only be purchased from reliable Russian or foreign manufacturers. Do not choose products for which the seller cannot provide the appropriate Certificates! Otherwise, you run the risk of acquiring not an orthopedic, but an ordinary mattress of dubious quality.

The most popular manufacturers, judging by customer reviews:

• Beautyson (Russia)). The company produces not only orthopedic mattresses, but also other products: covers, pillows, etc. When assembling products, the manufacturer uses the mechanical assembly method without the use of glue;
• Benartti (Russia)). This company specializes in the manufacture of orthopedic mattresses using unique Italian technologies. All products are available in different lines, each of which has its own distinctive features;
• DreamLine (Russia). The trade brand offers orthopedic mattresses and other products for a comfortable stay. The advantage of the company is the production of products of atypical sizes and the use of absolutely safe adhesive compositions.

Other popular manufacturers include Honnemed, Diamond Rush, Comfort Line, Lineaflex and Laneve.

+1 Liked the article?