№ |
Name |
Rating |
Nomination |
| 1 | FORT boat | 4.90 | Top selling |
| 2 | hunter boat | 4.82 | Best reviews on Otzovik and IRecommend resources |
| 3 | Flinc | 4.50 | Best Guarantee |
| 4 | ProfMarine | 4.40 | The richest standard equipment |
| 5 | Flagship | 4.35 | The safest inflatable boats. The best ratio of price and quality |
When compiling the rating, the cost and quality of manufactured products, the variety of the assortment were taken into account. Also, the duration of the brand's presence in the domestic market and the level of consumer confidence in it based on their feedback were taken into account.
Tips for Choosing the Best PVC Boat
For a person who is far from the shipping subject, the choice of a watercraft can be difficult. In order for the purchase to fully meet expectations, it is necessary to pay attention to a number of nuances. There are several types of PVC inflatable boats.
Rowing. The simplest and cheapest, suitable for short voyages.
Motor. Equipped with a special device (transom) for attaching the outboard engine. There are additional options for rowing.
RIB. They have a V-shaped bottom. A rigid body is located along the perimeter of the upper part. Thanks to this design, speed is ensured.
The material matters a lot. For the manufacture of inflatable boats, PVC of 2 types is used.
Reinforced. It is used for boats with increased load, equipped with an outboard motor. Suitable for long distance travel.
Unreinforced. Designed for light boats cruising near the shore.
Another important point when choosing is the type of bottom, on which the assembly speed, speed and other parameters depend. There are 3 types of boats according to the type of bottom.
Payol. The deck of such boats is made of plywood, less often - of aluminum. Rigid materials give the boat stability and improve ride quality. Among the disadvantages is a long and more complicated assembly compared to other models.
NDVD. Instead of aluminum or plywood, an inflatable liner is used at the bottom. The boat is not as rigid as the previous type, but lighter in weight and easier to assemble.
NDND. The craft has a fully inflatable bottom. Due to its multi-chamber stability and rigidity are achieved. One compartment acts as a keel and deck. Such a model is assembled without problems. Another indisputable advantage is speed. NDND boats are in stable demand year after year.
If the inflatable boat will be equipped with a motor, you should choose the right transom (vertical reinforcement at the stern). Inflatable boats may have the following types of transoms.
built-in. It is installed on vessels with an open circuit. The transom is made of steel or plywood with a moisture-resistant coating.
Suspension. Used for closed circuit boats. When choosing, consider the weight, power and modification of the motor.
Top 5. Flagship
The safest inflatablesThe maximum level of safety is made possible by the use of patented technologies: the surfaces are covered with seamless elastomers.
The best ratio of price and qualityThe cost of boats of this brand starts from 35,000 rubles. Even in the low price segment, buyers note good stability on the course.
- The average price of inflatable boats: 48,000 rubles.
- Availability of a dealer network: yes
- Service center available: yes
- PVC density: 750-880 g/m2
The company is considered a leader in the production of NDND boats in Russia. All boats are made with a significant use of manual labor, this eliminates defects. The bottom is reinforced with an innovative Fast sliding plate, which ensures a horizontal separation of water in the stern. NDND models have a 2-layer construction, complemented by wing-shaped fabric partitions, which gives the bottom deadrise. Boats are available in different sizes, designed to carry from 2 to 12 people.
- Increased UV resistance of PVC due to the addition of light-absorbing dyes
- Constant work on improving the structural and technical aspects of inflatable boat models
- Manual quality control in production
- The weight of any boat is more than declared by 1-1.5 kg due to the characteristics of raw materials from different batches
- There are cosmetic flaws: traces of glue and thread
Top 4. ProfMarine
The richest standard equipmentBuying a ProfMarine boat is accompanied by all the necessary accessories: from a storage bag to paddle oars.
- The average price of inflatable boats: 55,000 rubles.
- Availability of a dealer network: yes
- Service center available: yes
- PVC density: 650-850 g/m2
The company is located in St. Petersburg, where shipbuilding in Russia originated. Produced PVC boats are equally suitable for operation in small and large water. Such versatility is made possible by a modern contour and a special design of the bow. The V-shaped keel guarantees good handling. The model range of this brand is presented in 3 categories: economy, classic and Pro. Non-slip flooring prevents injury. The enlarged cockpit provides comfort for long stays on the boat and additional space for catch and belongings.
- Quick transition to planing with the ability to reach speeds up to 100 km/h
- Additionally, you can purchase a transforming awning to protect against splashes.
- 3 categories of goods by cost and quality
- Too protruding corners of the side stringers, which impairs the operational properties of the vessel
- Strong deadrise of the transom, due to which the echo sounder has to be mounted under the boat
Top 3. Flinc
Best GuaranteeFlinc boats have the longest warranty among Russian manufacturers of inflatable boats: 5 years for PVC fabric, adhesive joints, seams and fittings.
- The average price of inflatable boats: 27,000 rubles.
- Availability of a dealer network: yes
- Service center available: no
- PVC density: 650-850 g/m2
The manufacturing company is located in St. Petersburg. The online store delivers to all major cities of Russia. Returns and exchanges are possible within 14 days. Estimated delivery time 6-10 days. All goods presented on the virtual showcase are always in stock. These are motor and rowing boats of various sizes: 240, 260, 280, 300 and 320 cm.All models are equipped with 2-3 self-contained compartments with sealed membranes, which guarantees good vessel stability. On any boat of the brand, you can install clamps for an echo sounder, stands for spinning rods, as well as tables and shelves, which guarantees additional comfort.
- All boats are equipped with a removable transom for motor installation.
- Reinforced PVC is used as raw material, which increases the strength of products
- Sleighs are made of waterproof plywood
- Yandex.Market buyers note weak gluing of seams
- Due to the thin bottom, it is impossible to moor the boat on a rocky bottom without fear of getting a leak.
Top 2. hunter boat
Best reviews on Otzovik and IRecommend resourcesIt is possible to buy a model within 50,000 rubles. with a reliable transom for the motor. The boats of this company are recommended by 100% of the users of the site Otzovik.
- The average price of inflatable boats: 48,000 rubles.
- Availability of a dealer network: yes
- Service center available: yes
- PVC density: 850-1050 g/m2
The manufacturer of inflatable boats from St. Petersburg has been known on the market since 2009. During this time, the company has managed to win consumer loyalty not only due to quality, but also to a wide product range. Every year the company releases an updated range of boats, special attention is paid to NDND varieties. In this category, close attention deserves the PRO series with a combined color of the body made of high-strength PVC 1050 g/m2. Among the main advantages: a long cockpit (up to 2.65 m, depending on the model) and impressive tank volumes (up to 0.25 atm). Watercraft of this brand can carry loads from 350 to 750 kg without loss of power and speed characteristics.The brand also produces accessories and components for boats.
- Boat ergonomics thanks to cooperation with professional anglers
- Guaranteed service life of any model is 5 years
- Actual service life up to 7 years or more
- No drain channel and anchor eye
See also:
Top 1. FORT boat
Top sellingBased on data from Ozon and Yandex.Market marketplaces, boats of the FORT boat brand can be confidently called the best-selling boats in Russia.
- The average price of inflatable boats: 15,000 rubles.
- Availability of a dealer network: yes
- Service center available: no
- PVC density: 600 g/m2
The Russian company FORT boat produces single and double boats from German raw materials. Models are designed for fishing and hunting in the coastal waters of lakes and rivers. Watercraft are adapted to swamps and shallow areas overgrown with reeds. The maximum load capacity, depending on the model, is 150-180 kg. All boats are equipped with plywood sheets up to 6.5 mm thick.
- When folded, the boat models of this brand do not take up much space.
- PVC will not fade or crack under UV light.
- Elastic material is tear resistant
- Buyers note the inattention of pickers: among the missing elements are seats, a pump and oars
Liked the article?
