Top 10 PVC window profile manufacturers

According to the certificates, Novotex uses the same plastic as Rehau. Different profile thicknesses are offered on the market, on which the degree of noise and heat insulation depends. The disadvantage of the material is that it is afraid of heat, but it is over 45 degrees. The system remarkably withstands temperatures from -45 to +45°C. Some may not like the matte finish of the profile - it's not for everyone. Novotex does not shine like Salamander. But if reinforcing elements are used in it, the rigidity of domestic windows will be the same as that of German ones. And the affordable cost is easily explained by the dimensions of the system. For example, if for the Germans it is 60 mm, then the Russian profile will be 58 mm thick. This does not affect heat and sound insulation in any way, but the price will be significantly lower.

The once German plastic windows have been produced in Moscow by a subsidiary of VEKA Rus for several years now. The main thing is that the manufacturing process is based on the same European standards and quality control.As reinforcement, a closed element is used here, and not a U-shaped one, as in most systems. The company cooperates only with reputable window manufacturing companies, concluding an agreement on the use of Veka profiles only. Well, if it so happened that the plastic was deformed through no fault of the user, then the company will exchange it under warranty. True, the guarantee is not provided for yellow spots and, in general, the easily soiled appearance of window blocks.

Many people think that this profile is made in Germany, but no. KBE blocks are produced in the Moscow region using German technology. For example, GreenLine technology implies a high environmental friendliness of the profile. It does not contain lead and can be used in residential areas without harm to health. Despite high technology, approximately 85% of users note that the KBE profile changes color over time. For this and other reasons, the company is gradually losing its position in the market. If earlier the concern's products participated in all exhibitions, now they appear there less and less.

One of the most budget options, so not the highest quality. Despite this, the brand is recognizable in the Russian market and has already collected a lot of positive feedback. Plastic profiles have been produced for more than 10 years using Austrian technologies. There are some unusual solutions here, for example, a semi-gloss finish. It does not collect small scratches and scuffs. In the Austrian profiles, the paint is also not bad. It does not fade and does not lose its appearance even on the sunny side. The reinforcement of the profile is mainly U-shaped from steel 1.5 mm thick. Of course, a closed version would be better, but it is very rare, and it costs much more. The weld coefficient is 2.5, and this even exceeds the GOST standard. It is clear that everything is fine with the strength of the blocks.

Profile blocks are manufactured in the Russian city of Bryansk. Most often, systems are produced under the slogan "Windows for Russia". This is a cheap option with three-chamber profiles. Yes, now five- and six-chamber systems are gaining great popularity, especially in the northern regions. But if you want to save money, then Brusbox will please you. The low price is due to the use of thin Borsodchem ZRT plastic, by the way, Rehau also uses it. It is because of its thickness that the profile is afraid of mechanical influences. But the material, although inexpensive, does not cause allergies and is not toxic. The competent design of plastic chambers copes well with noise and heat insulation.

German quality and more expensive. Yes, it’s not worth saving on good windows.On the inside of the Shuko profile, a special marking is applied (date and time of manufacture, etc.), which cannot be “printed” in garage conditions. Checking its presence, you will not run into a fake. Another indicator of quality is drainage holes to drain water from the frame. They are neatly drilled without any burrs, which is not the case with cheap PVC stampings. And as a bonus, you can order German fittings from the same company. The quality will be great too! The manufacturer assures that the profile is fully suitable for the harsh climate of Russia.

The German company rightfully occupies a leading position in the plastic window market. Reinforcement gives rigidity and strength to its products. A metal reinforcing part is installed in the largest chamber. It can be U-shaped, L-shaped, closed or open. The larger the window, the more reinforcing element in the profile. A stand is mounted under the double-glazed window, which increases depreciation and simplifies the installation of the double-glazed window itself. The manufacturer offers several lines: economical 3-chamber Blitz, modern GENEO with fiber reinforcement, the quietest INTELIO 80 and many others. In addition to the production of windows in Russia, the company is engaged in sponsorship of sporting events and green building.

This is an Austrian company in the budget segment. Nevertheless, the quality of the profile remains at its best and is in no way inferior to more expensive counterparts, such as Rehau or Mont Blanc. Excellent thermal insulation will keep you cozy in the winter cold. The air chambers of the profile are responsible for this. In Richmond systems, there can be up to 4 pcs. Therefore, such windows can be installed even in the conditions of the Far North. Heat saving reaches class A4, so at -50 it will not be cold. By the way, the profile is especially fond of the Western region of the Russian Federation. He is also very attractive in appearance.

German profile, from which you can create masterpieces.These can be products with double glazing, arches or even completely round windows. The attractive appearance of the profile is complemented by practicality. The glossy surface does not collect dirt, it is easy to wipe dust from it. And in the room you will always be warm. By the way, the white color, which has a “habit” to turn yellow, in Salamander does not change its shade even in direct sunlight. And the streamlined shape of the profile and glazing beads gives the windows aesthetics in comparison with their angular counterparts. Unfortunately, you will not find German systems in every city. If you do meet, they often break prices, guided by the fact that this is one of the few foreign-made profiles.

A European-level company engaged in the production of PVC profiles and the development of extrusion tools. The head office is located in Oberkotzau, Germany. Production facilities are scattered throughout Romania, Lithuania, Poland and Germany itself. Innovative technologies and modern solutions make it possible to create systems with excellent noise and sound insulation.Another advantage of German profiles is tightness. There will never be a layer of dust on your windowsill, unless the window is open for days on end. Plastic will not turn yellow or crack even on the sunny side. The GEALAN S 3000 series is produced in Novosibirsk. This is the only line of the company produced in Russia. The interest of architects and builders is attracted by the KUBUS series. It is a profile with a design depth of 100 mm, which opens up a wide range of possibilities for a better eeffects of lighting and transparency.