10 best wireless chargers

Let's open the category of unusual wireless chargers ... with a mouse pad. Yes, yes, you read it right. Our attention was drawn to the mat from the popular Xiaomi. Why clutter up the table with a separate charge when you can combine two useful devices in one device? The design is quite simple - a plastic pad for the mouse with dimensions of 420x260 mm, a control puck and no distracting drawings. The control wheel is designed to adjust the audio volume on the computer and control the RGB lighting. The base of the rug is made of aluminum - there is no doubt about the reliability. The bottom is covered with non-slip polyurethane.

Finally, about the charging itself. The area for it is reserved on the right side of the rug and is barely noticeable against the general background. The location is convenient - the phone is at hand, but does not interfere with working with a computer. The power of wireless charging that supports the Qi standard is 7.5 W, which many even more expensive specialized devices cannot boast of.

One of the most unusual and at the same time successful wireless chargers. This device is two in one - and charging for a smartphone, and a night light. The design is made in the style of Xiaomi: white matte plastic, minimalistic look. The module with a night light is removable - it is on a magnetic mount. The night light has a built-in battery, so it can work autonomously. The reviews say that it is convenient - you can attach it to the refrigerator door or leave it overnight in the nursery. There are two glow modes - cold and warm. Both are pretty bright.The cold light is turned on first by default, which causes dissatisfaction among the owners.

Wireless charging works great too. Power is limited to 10W. It may be that the complete cable is not working. The platform where you need to put the smartphone is not rubberized, so the device can slide. It is important to find out where the coil is located in the phone, and place this place directly on the logo on the wireless charger.

Over the past century, man has surrounded himself with artificial objects made of plastic, metal, glass. That is why more and more people want to see natural materials around. Or, at least, their imitation. For example, Skyway Energy Fast wireless charging can help. Unfortunately, the leader of the rating only imitates a tree, although it is very natural. In reality, the stand is made of plastic. The buyer has a choice of dark and light wood, as well as a black minimalist model.

Charging, as we are used to, supports the Qi standard. Maximum power - 10 W - a good indicator. I am glad that you can charge your smartphone in both horizontal and vertical positions. Given the slight slope of the stand, this allows you to comfortably watch videos or read from your phone. Finally, the manufacturer claims protection against overheating, short circuits and emergency shutdown when foreign objects enter the docking station.

The most convenient car charger that is suitable for both iPhone and Android smartphone. The clips are wide enough to fit even the largest iPhone 12 Pro Max. Infrared sensors are hidden in the device, which automatically push the clamps apart when you bring your smartphone close to them. There is an adjustment of the angle of inclination - it is smooth, stepless. Charging power is high by the standards of wireless models - 20 watts. This means that the Samsung A52 will charge in about an hour and a half. The manufacturer has also developed a cooling system so that your phone does not overheat while replenishing the cherished interest.

Despite the fact that the model is one of the most popular among automotive options, it has a significant drawback. It's about fastening. The device can be placed in a deflector, but in the reviews, users say that it does not hold well on a regular mount - it can fly out on a bump. Owners get out of the situation by purchasing additional fasteners for glass or improving the complete set.

For fans of simpler devices, the Baseus smartphone car mount is perfect. The design is simple but pleasant enough. The materials used are plastic and metal. It is especially pleasing that, unlike many competitors, there are 3 colors to choose from: black, silver and red. Finally, you can choose a holder for the color of the interior of the car. Also, the positive aspects include the mechanism of the holder - gravitational - when pressing on the lower eyelet, the side ones are compressed.Thus, the phone is securely fixed without unnecessary movements and external power.

The holder supports Qi wireless charging, which means it is compatible with most phones. The maximum output power is 10 W, which can be considered a good result. To prevent overheating, ventilation grilles are provided in the rear of the mount. If the phone does not support wireless charging, you can use the usual wired one - the design of the bottom mount does not block the input on the smartphone. Also, the advantages include the ability of the holder to accept devices up to 85 mm wide.

We will give leadership in the category to a high-quality, very convenient and at the same time quite affordable device from NILLKIN. First of all, the holder attracts attention with its appearance - no clips or buttons, only a rounded compact area with soft backlight, which is almost always hidden behind a smartphone. You can fix the device in the car on the deflector grille or any flat surface with well-proven 3M adhesive tape. The smartphone itself is held by a powerful magnet. His strength is enough to confidently hold even heavy vehicles on domestic roads. And to fix modern flagships, made entirely of glass, the kit includes a pair of metal plates that are attached to the back cover.

Wireless charging complies with the Qi standard, which means it is compatible with most modern smartphones, including Samsung flagships and iPhones.10W Power - Phones will charge at about the same speed as conventional wired charging.

As a rule, wireless chargers are purchased to make life easier and get rid of wires - you throw the device on the site, and it immediately starts to charge. The Baseus Suction Cup wireless charger is designed for a different purpose. The appearance is strange: only a small (approximately 5x5 cm) block with an abundance of suction cups and a non-removable wire. There are two colors to choose from - completely black or a white block with a red wire. The latter looks very classy.

So what is this device for? The most logical use is to use it while playing games or watching videos when the phone is held horizontally. At the same time, in almost all smartphones, the hand closes the charging input, and the wire simply gets in the way. And so, we attached a wireless charger that delivers up to 10 W, and you play while charging your phone.

One of the best creations of Samsung opens the TOP 3 wireless chargers for smartphones. The main advantage of the model, of course, is a stylish little space design. The charging design is not only aesthetic, but also has practical applications. The device can be used not only to charge the phone, but also as a stylish stand.Thanks to this, a charging smartphone is easy to use for Skype calls, watching video content, listening to music and some other purposes for which it is not necessary to hold the gadget in your hands.

It is also important that Samsung's wireless charger is equipped with a good and fairly quiet fan that turns on when it overheats, reducing the temperature of the device. A small indicator shows the charging mode. It charges quite quickly, although it is slightly inferior to wired charging and the leader in the rating. In general, the model can be called a good value for money.

The second representative from the Baseus brand, at first glance, is unremarkable. The body is thin, made of nice matte plastic. There are three colors to choose from: black, white and blue. Again we say “thank you” to the manufacturer for a fairly wide choice. The cable is removable, long, there are no complaints about it. Noteworthy is a small information display on the case, which displays information about the voltage. It serves not only for decoration, but also for understanding what kind of power wireless charging is currently producing. This allows you to choose the right power supply and the location of the device to be charged on the platform.

The manufacturer claims a power of 10 watts. Charging supports Qualcomm QuickCharge technologies 2 and 3 generations, which slightly increases the speed of replenishing the battery. It is also worth noting that charging is more suitable for owners of "apple" devices, because the input connector is Lightning. The disadvantages of users in the reviews include occasional cases of marriage.Purchase this wireless charger only from reputable sellers.

The leading position is occupied by an extremely simple, but very high-quality assembled wireless charging from Xiaomi. Minimum dimensions: 12.4x47x47 mm. The case is made of metal, which has a positive effect on the durability of the device and its ability to dissipate heat, which abounds with wireless charging. The base and platform for the charging device are covered with soft rubber - this coating prevents slipping and scratches. True, it is difficult to care for him, because an ordinary rag is not able to collect dust.

Specifications are banal. Mi Wireless Charging Pad supports wireless charging with a maximum output power of 10W. To ensure maximum performance, you will have to attend to the selection of a power supply that produces at least 2A. By the way, charging is connected via USB Type-C, which is good news. The supplied cord is short - only 1.2 meters. Users also note a certain percentage of marriage - be careful when choosing.