10 best studio headphones

Audio-Technica ATH M30x is the budget leader in the ranking. The impedance of studio headphones is 56 ohms, the sensitivity is 98 dB / mW. Reproduce the range from 10 to 30000 Hz. Passive noise reduction method.No extra bells and whistles, but at the same time, the headphones easily dampen external sounds. It can be confusing that for such little money there is such a good quality. The secret is that the headphones are based on AKG technology. The average frequency is even, the bass jumps a little, but this is not critical, and not everyone will hear it.

The model has a detachable cable. There are two of them in the kit: for 1 meter and for 3 meters. If desired, they can be combined into one 4-meter wire. The ear pads are removable and easy to clean. In the reviews, buyers note that they use the Audio-Technica ATH M30x as a working tool; a closed model is not suitable for listening to music. This is a great option to try out monitor headphones without breaking the bank.

Monitor headphones that are suitable for home, street and studio, they may even be of interest to Dj. Their first feature is that, unlike most monitor headphones, they have no difference in sound by genre. You can safely listen to jazz, rock, pop, and even classics in them. This is a budget and reliable device with a convenient design and good isolation from external noise. The second feature is the speakers with a corrugated diaphragm.

Dynamic type device with a range of 10-20000 Hz. Sensitivity is above average and is 106 dB. The impedance is 63 ohms, so no sound amplification devices are needed. The reviews write that the sound is not bright and even enough when compared with the monitor headphones of this model range. This can also be seen from the frequency response graph: the bottoms are smeared, but the upper frequencies, on the contrary, are clamped.But models of this level require warming up to reach their sound potential.

The HD line is known for its quality and good sound. In the top, we singled out the Sennheiser HD 280 Pro model - the best option for the ratio of German quality and cast-iron reliability. These classic headphones are perfect for mixing or recording. They are loved to be used in modern studios, as they have proven their quality. No less than the sound, the assembly pleases. The design is simple but reliable. Distinguished by its durability. Spiral wire. Can stretch up to 3 meters. It is thick, so it is difficult to tear it.

According to the technical characteristics, it is worth noting that all frequencies are heard equally smoothly, there are no obvious dips. Sensitivity at the level of 102 dB. Dynamic type of sound reproduction with a range of 8-25000 Hz. The impedance is 64 ohms - this means that the model is poorly compatible with cheap players or phones. The consequences of such a combination are a small volume or blurring of the sound, the appearance of unnecessary noise.

These monitor headphones are best suited for professionals, as high-quality sound reproduction requires a powerful source. This is because the impedance is 250 ohms. The type of sound reproduction is dynamic at a frequency of 5–35000 Hz. Sensitivity - 96 dB. High quality sound with minimal distortion. There are no obvious drops on the frequency response graphs. The DT 770 doesn't let any extra sounds out.The cable is strong, twisted, 1.5 m long. And in a fully stretched state - 3 m.

The coating of the model is embossed, decorated under the skin. It does not leave fingerprints and scratches are not noticeable. Although outwardly the design is quite massive, it weighs only 270 g. The headphones sit comfortably without causing discomfort due to the softness of the part adjacent to the head. In the reviews, buyers emphasize that Beyerdynamic should be used at work, and not for listening to music. Their sound may seem too classical.

The Shure SRH1540 is designed for professional musicians and sound engineers. Almost reference sound quality - that's what you should expect from them. According to the characteristics: 5–25000 Hz - range with dynamic type, sensitivity - 99 dB / mW. Low impedance - 46 ohms, no additional amplification is required. Good level of noise suppression. The headboard has a memory effect, so you don’t have to re-try the headphones every time and get used to them. The design is quite light - 286 g. At the same time, the quality is high - it is based on an alloy of aviation aluminum.

Shure SRH1540 is not only functional, but also very stylish. And this is good, because there are not many companies that spend a lot of time creating beautiful designs for monitor headphones. According to the reviews, we can say that they have no flaws, the only thing you might not like is the price. But we must not forget that this is the level of professional equipment.

The AKG K 712 Pro headphones are designed for professional sound engineers. The model is hand-assembled, its design is unique, and the over-ear construction is comfortable. The operating range is 10-39800 Hz, the resistance is only 62 ohms, which allows you to use not the most powerful equipment for sound mixing. Therefore, this model is a good option for a home studio. Includes XLR mini connectors. The plugs are gold-plated for a clearer signal transmission.

AKG's Flat Wire Voise Coil technology and +3dB equalized low-frequency section improve signal detail, promote accurate sound reproduction, and deliver powerful bass. The open over-ear design allows for a spacious, airy sound. The AKG K 712 Pro is ideal for live mixing where you need to hear the clearest possible sound both in headphones and on stage. The sensitivity of the model is 105 dB SPL/V.

With a strong desire, DT 990 can be used as headphones for recording.But they're not really designed for that. But it is difficult to find them equal in mixing. The model is well balanced, the frequency response is even, there are practically no shifts. The sound is collected, rich and voluminous, this allows you to evaluate the composition widely and accurately position the instruments. Frequency range from 5 to 35000 Hz. Sensitivity 96 dB. The impedance is 250 ohms, which means that you can not combine headphones with weak devices. They require quality equipment.

Headphones are made of metal, ear pads are velor, bowls are made of plastic. The whole structure is designed in such a way that no extra pressure is felt, and one could sit in them for more than one hour. They are suitable for home and studio, but on the street, due to their size and 250 ohms, it is problematic to use them. And do not forget about the genre "selectivity", so it is advisable to test the model before buying.

The Japanese company Roland has been producing quality tools and accessories since 1972. The RH-A30 headphones feature high quality monitoring. They sound stable even with powerful power surges, have high protection. The presence of in-ear monitors with a linear frequency response allows you to accurately reproduce sound in a wide range - from 10 to 25,000 Hz. Sensitivity - 96 dB, resistance is 40 ohms. Input power - 1600 mW.

The body is made of aluminum, the ear pads are fabric. Due to the comfortable headband, long-term work in this model does not cause discomfort. The size of the headband is adjustable. The weight of the model is 250 g, the cable is 3.4 m long, non-removable, with a 3.5 mm plug. The kit includes a gold-plated 6.3 mm adapter.Headphones are designed for the studio with semi-professional equipment. But the best sound is noted when using the equipment of the same company, for example, with Roland keyboards.

Sennheiser's super-quality yet demanding headphones are crystal clear in every way. The device is suitable for lovers of high-quality sound or those who work in the studio. Absolutely smooth sound, without any distortion. Even demanding listeners will not be able to find ringing notes, prolonged basses - the sound quality is better than that of water. But you need to be prepared for the price and understand whether it is worth buying such an expensive model for yourself.

According to the characteristics: range 10–41000 Hz. Sensitivity - 103 dB. But 300 ohms of impedance is sad for those who do not have the appropriate equipment. With an ordinary player, you should not expect anything - there will be bad sound and continuous interference. The weight of the device is 260 g, because a lot of plastic is used in the design. Although the headphones look fragile, they are not. A 3-meter cable is included, but you should take care of it, since it is the only weak link in the model.

Fostex T50RP MK3 is a novelty in the domestic market. Despite the fact that Japan has long been engaged in the production of professional equipment, this model came to us relatively recently. Isodynamic headphones of the Regular Phase series transmit the most natural sound. Accurate strong bass, ringing high frequencies, smooth and clear mids - a balanced sound of each note.Headphones are especially ideal for academic music. Operating range - from 15 to 35000 Hz, maximum input power - 3000 mW.

Since the Fostex T50RP MK3 is designed for professional studios, only powerful and high-quality sound sources are suitable for them. The kit includes two cables - 1.2 m with a 3.5 mm plug and 3 m with a 6.3 mm plug. Both cables have special locks against accidental disconnections. The headband is soft, with auto-adjustment. Given all the advantages of the model, studio headphones can be classified as budget ones.