10 best blowtorches

Despite the ergonomic shape, the soldering tool, which is more modest in size compared to many analogue models, is characterized by quite serious working qualities. Heating after ignition occurs very quickly, which allows for a special placement of the feed tube. A steel ejector combined with a protective cover provide a continuous flame supply, the level of which can be regulated by a special valve. Gasoline is consumed sparingly, so a fully filled tank lasts a long time. At the end of the operation of the device, users recommend cleaning the nozzle with the needle included in the kit. By cons, buyers include the inconvenient shape of the container for filling fuel, the insufficiently polished seam of the bottom of the tank.

The lamp heats up very quickly, gives a powerful, stable flame - you can safely work in windy weather. Any model has a clogged nozzle. In this case, this is not a problem - the nozzle is located outside, it is convenient to unscrew for cleaning. The metal of the burner is quite thick - you can count on a long service life.

The package includes a repair kit. For convenience, it is hidden in the handle. The device can run on 92 and 95 gasoline. The scope is wide - it can be used for repair work, domestic purposes, for soldering, heat treatment of parts. Minus the lamp - it is difficult to adjust the power of the flame.

This model of a blowtorch is produced by a manufacturer popular in the CIS, the quality of the range of which has stood the test of years in difficult climatic conditions. Such a gasoline device, with all the simplicity of its design, received a durable cast-iron ejector, which evenly maintains the desired temperature regime, and slowly cools. Working properties do not change at very low temperatures due to the complete combustion of the fuel. At the same time, the flame, protected from the wind by a special casing, has a stable intensity. This is facilitated by the increased diameter of the pump. The best tool in its category, as indicated by customer reviews, suffers from the shortcomings common to many competing models - clogged nozzles that require cleaning with a needle, and loud sound.

High quality, reliable blowtorch at a low cost. It can work on gasoline of any brand, except leaded. Although the reservoir has a capacity of 1.5 liters, it is best not to fill it completely - a maximum of 1.1 liters. Fuel is consumed economically, one refueling is enough for an hour of work.The handle is steel, simple, but quite comfortable.

The reviews contain different information. Of the pluses, users note the ease of adjusting the fuel supply, of the minuses - the quick clogging of the nozzle. It is advisable to clean it after each use.

The soldering tool attracts attention with its design features, optimal for many types of work, the volume of a steel tank with a neck located on the side for convenience. With its help, liquids of different densities, pipes are easily and quickly heated, it is indispensable for waterproofing measures. An open flame appears quickly, has a wedge shape, which allows the lamp to be used in hard-to-reach, narrow places. In addition, its flow can be adjusted by a screw. Unleaded 92nd or 95th gasoline is used as fuel. The device is characterized by economical fuel consumption - 1.2 l / h. The disadvantages of the model, users in the reviews consider the tight opening of the valve, the difficulty in finding a repair kit.

A very practical soldering lamp model is designed for high-quality operation during construction and other works due to its powerful technical potential. It is great for soldering copper and tin in different diameters. As a solder, the use of copper-phosphorus, silver or soft solder is acceptable. The length of the sharp flame reaches 17 cm, it is continuous, uniform. The reinforced metal tip withstands a working pressure of 1.5 bar. In this case, the consumption of propane-butane is minimal compared to competing models, it is 110 g / h. The wear-resistant steel tank has an optimal volume, which allows continuous operation for 1.15 - 1.30 hours. Disadvantages of the model - the power is inferior to analogues (1.6 kW), increased body size.

Such a blowtorch is most often used in the food industry and at home for small heating jobs. It is equipped with a reliable brass nozzle that forms a wedge-shaped flame. Its intensity is smoothly regulated using a special valve built into the body. The nozzle used is the standard type X 1550. The Campingaz C 206 gas cartridge is enclosed in a metal sheath for safety. The consumption of propane-butane is 120 g/h. One working cycle reaches about 2 hours. The operation of the device comes from a pierced gas cylinder, which is not included in the package. Users also attribute the fragility of the plastic latch for attaching the container to the disadvantages of the model.

This device is effective for heating objects, soldering and welding at home with mandatory ventilation and outdoors. The metal container is covered with a thick layer of anti-corrosion enamel, while the upper part (start button, control valve, handle) is made of plastic. The holder is convenient for girth and a long cycle of work, and it corresponds to the volume of the butane tank connected by piercing and is 190 grams. The fuel in the lamp is consumed on average in the amount of 180 g / h, however, by simply rotating the valve wheel, the flame and pressure can be adjusted. Cons - there is no gas cylinder in the set, poor-quality operation of the piezo ignition at low temperatures.

One of the best options for multifunctional stationary blowtorches.You can use an open flame with a catalyst and a soldering nozzle. Runs on liquefied butane. For convenience, the model is equipped with a piezo ignition. With a tank capacity of 22 grams, the device operates in intensive mode for about 75 minutes.

There are many useful options - child lock, removable leg for stationary work, flame level lock, temperature mode selection. The kit includes several nozzles - for soldering, lengthening the torch. In terms of functionality, the lamp resembles a professional model. Users note the ease of recharging, very short heating time, ease of use. Of the minuses, they name only a fairly high cost.

The soldering device is best suited for pipe heating, painting, firing and soldering. By simply pressing the piezo ignition button, the operation of the device is activated, and the temperature regime can be adjusted with a ribbed plastic valve by its normal rotation. The presence of a conveniently located, protected from accidental pressing safety ignition slider increases safety of operation.For the same purpose, a stand is provided, which ensures a stable position of the lamp. Another plus mentioned in the reviews is the presence of a viewing window in the built-in tank for visual control of the amount of gas. Cons - not suitable for soldering small items, tank material - plastic.