Top 5 Welding Tractors

The welding tractor has a modular architecture with a separate inverter. The device can carry out submerged arc welding in an automated mode, the effectiveness of which is expressed in a significant acceleration of the work process, which does not affect the quality of the weld.It can work on joints with an overlap, butt, and also perform fillet welding. Movement is carried out both along the guide and directly along the material to be welded. It is possible to adjust the position of the welding seam - it can be both inside the track and outside.

The welding tractor has a simple structure, which increases its reliability. Protection against overheating and voltage surges, high-quality forced cooling also have a positive effect on the service life.

The welding tractor performs single- and multi-layer submerged arc welding. Connection to a three-phase network is required. The software allows you to synchronize the speed of the trolley and the wire feed. The unit can move both along the surface of the welded material and along a special guide. The welding tractor can be controlled remotely. Through the remote control it is also possible to carry out smooth adjustment of the welding voltage.

The working head is movable, and is set at the right angle to the surface. During the process, the convenience of visual control is provided by a laser beam marker. Seams can be performed in a straight or ring technique. The equipment can apply lap seams, butt weld (both with and without cutting edges), and at an angle (joining in "tee").

This self-propelled unit can perform automatic submerged arc welding, has a separate structure (inverter power supply and automated installation) and high speed: in one minute, the welding tractor makes a seam 10 to 15 cm long, depending on the thickness of the metal.

In addition, it is possible to separately use the inverter for air-arc gouging (cutting the workpiece to a certain depth) or electrode manual welding. Existence of system of protection against an overheat and short circuit allows to avoid premature failure of a welding tractor, and also to secure working personnel.

The welding tractor Svarog MZ1000 is designed to work with various metals with a thickness of 4 to 30 mm. The high productivity of the equipment allows the plant to be used in continuous production processes. The stability of the adjustable output current parameters ensures a smooth arc, which has a positive effect on the quality of the weld.

The welding unit has an internal circuit for stabilizing fluctuations in the incoming voltage, and a three-phase network is required to connect it. Modern control and displays for displaying the set parameters greatly simplify operation. In addition, there is a memory for recording (up to 100 tasks) of the main welding algorithms, which speeds up the process of setting up equipment.

An excellent welding tractor, when working under a flux can use two wires at once (arc splitting).Prevention of air access to the weld pool can also be carried out with the help of inert gases. By installing a special adapter, the unit can be used for air gouging with a carbon electrode. The LAF thyristor inverter used with the unit has a three-phase connection and ensures high arc stability even at low voltage.

The accuracy of movement in the process of welding along the connecting seam is ensured by the all-wheel drive of the trolley. The information display, convenient operation, as well as the possibility of programming the operation of the tractor greatly simplifies the operational process. The equipment is distinguished by high build quality and used components, which determines the efficiency of operation even when working in difficult conditions.