10 Best Cellular and Internet Signal Boosters

The simplest signal amplifier used to work with a 3G or 4G modem. Installation of this is carried out in a full-sized USB-connector located on the rear panel. The lower part of the amplifier has only a special stand, thanks to which it will stand in a vertical position. And from the side end here you can get a cable with a USB connector at its end. The cable length reaches 1.8 m, so you can easily connect the amplifier to a desktop computer or laptop. It remains only to direct this model towards the base station closest to you.

This is one of the cheapest devices of its kind. Therefore, we do not recommend that you hope for a perfect gain. The manufacturer declared the parameter at the level of 9 dBi. Testing shows that the amplifier really lives up to this figure. I am glad that the product works with most of the LTE standards used in Russia. This allows you to enjoy high-speed Internet access even somewhere in a village or village. Just do not place the antenna outdoors in any case! The fact is that the domestic manufacturer, for the sake of economy, did not introduce any moisture protection.

The AT-400 repeater has proven itself in densely built-up areas, lowlands, metal garages, etc. Miniature, weighing only 300 g and the size of a cigarette case, low-power (3.2 mW) and inexpensive, it is designed to enhance cellular communications in a limited space.In theory, its coverage area is 20 square meters. m., but in practice it does not exceed 10. Thus, they prefer to use it outside the city, in the country, in a car, garage, small office.

The device is designed to create a stable cellular connection through CDMA phones. The frequency range of received and sent signals ranges from 890‒915 MHz. The package includes both antennas, a 9 m long antenna wire, and a 220V power adapter. The device is equipped with a spurious signal protection function, it is provided with warranty and service support from the manufacturer, which, by the way, is considered one of the most experienced in the field of telecommunication systems.

This amplifier is commonly used by YOTA customers. However, other telecom operators also do not remain on the sidelines. The manufacturer announced support for LTE-2600 (band 7), LTE-1800 (band 3), LTE-800 (band 20) and several other standards. If the base station with the fourth generation network is too far away, then at least the 3G or 2G signal will increase, which is also not bad. And the product also boasts a beautiful pattern with which the antenna is decorated. And for good reason! The fact is that it can be located outdoors, as evidenced by moisture protection according to the IP68 standard.

Judging by the reviews, the cellular signal booster has proven itself well even in cases where the nearest base tower is a couple of tens of kilometers away. As much as possible from the device, you can receive and transmit data at a speed of 300 Mbps. This corresponds to the sixth category of the LTE standard.This is not surprising, because the gain in this case reaches an impressive 22 dBi. Another feature of this model is the built-in Wi-Fi module, thanks to which the product turns into an analogue of a router.

Like many other repeaters, this one does not involve the help of a master. To install it, just use the complete instructions. No difficulties are expected, since the product does not require the purchase of an external antenna or any other accessories - everything is already included in the kit. I am glad that the device has a decent gain (13 dBi). However, you have to accept that the Vixion V900k will only work with a UMTS900 (3G) signal. This means that such a purchase makes sense in cases where it will be used in very remote and sparsely populated areas, where the nearest 4G towers are many, many kilometers away.

The main feature of the device is its external antenna connected via a ten-meter cable. She is all-weather. This means that you can place it on the roof or wall of the house. Just do not forget to try to direct it towards the base station. For installation, you can use the complete tape or fasteners, which, again, they did not forget to put in the box. If we talk about the shortcomings, then this model will not suit someone with its price, and someone with only a six-month warranty.

One of the most popular cellular amplifiers in our country.At least if we talk about models designed to work with 2G and 3G standards. Often, even telecom operators themselves use this device! As you may have guessed, the amplifier interacts with the 900 MHz band. It's even listed on its top bar. Here, the LEDs show how effectively the device is now coping with its task.

The maximum gain from the Titan 900 PRO is 70 dB. This is a huge number! With it, you can safely use the device even at a 40-kilometer distance from the nearest cell tower. Interestingly, to capture the signal, you can use two antennas supplied in the kit. The first is indoor, while the second is outdoor, it is able to work in any weather. Also in the box with the device you will find fasteners, a ten-meter cable, a power supply and other little things useful in installation.

BS-GSM / 3G-75 is a domestic-made booster to increase the strength of the GSM and 3G signal, operating in two bands of 900 and 2100 MHz. Absolutely all operators own a network of transceiver equipment operating in these frequencies, so device owners do not experience any problems with the quality of cellular communications and mobile Internet. To assemble the amplifying complex, you need to additionally purchase 2 antennas and 2 cables and spend about 5,500 rubles more.

Thanks to decent power (500mW) and KU (75dB), the amplifier covers more than 1500 sq.m.For safe interaction with the operator, 2 fast-response circuits AGC and ALC are built into it, which are responsible for automatic control of the G-factor depending on the power of the incoming signal. The radio device is enclosed in a compact metal case, which eliminates overheating of the board or its damage during mechanical action.

This amplifier is the result of the efforts of design engineers and assemblers of the research and production company Moscow Microwaves. Today, its customers are such powerful enterprises as RosCosmos, SberBank, MTS, etc. But the range of cellular communications includes solutions not only for large corporate clients, but also for individuals, residents of villages and towns, where the signal is lost and the mobile Internet does not work.

The place of installation of the 900 SXB+ model is a country house, summer house, office and other buildings with dimensions not exceeding 150 sq. m. m. Adjustable power (50 mW) and gain (65 dB) is enough to connect several internal GSM antennas. Users note that although this is not a professional device, it is equipped with a mini-computer that manages operating parameters and controls modes. There is also an LED power indicator and a link quality indicator.

The KROKS RK1800-60 model belongs to the boosters of the initial price range, however, if there is a strong signal in the area where the external unit is located, it perfectly solves the problem of constant failures in GSM and LTE cellular communications. The coverage area is limited to 200 sq. m., and the manufacturer recommends its use in cars, small apartments and cottages.

The repeater is equipped with indicators that allow you to identify and timely eliminate the "loopback" of the signal. There is also a system for auto-adjusting the gain, and for more precise tuning - manual control. So the manufacturer prevents the appearance of interference in the radio channel common to all subscribers and thereby protects its customers from administrative penalties.

Unlike standard amplifying systems, 3Gboost consists of only 2 active components: a receiver unit and a coverage module with a built-in internal antenna. They are connected by a 20 m high-frequency cable (10 m for analogues) and are made of high-quality components, due to which an optimal signal-to-air noise ratio is achieved. The device is single-frequency and supports all operators working in the 3G UMTS 2100 standard. The scope includes residential and industrial buildings remote from the base station, summer cottages and summer cottages up to 500 sq. m. m.

The amplifier is designed for the end customer, equipped with everything necessary for installation, which does not require special skills and tools and lasts, without exaggeration, 1 minute.The connected equipment independently controls and adjusts the power to remove interference and stabilize the signal transmission level. The organization of mobile Internet is provided wirelessly to any 3G device, whether it is a tablet, laptop, smartphone or modem.

The VEGAtel company has been producing a wide range of cellular communication amplifiers since 2011 and has proven itself from the best side due to the reliability of the equipment produced and loyal customer service. Models produced under the Titan brand are designed to amplify the signal in all cellular communication bands. The Titan-900 (LED) kit is well suited for amplifying voice cellular communications and 3G mobile Internet outside the city: in the country, in the countryside or in a cottage village. Now it is the most in demand for these purposes, especially during the summer season.

The popularity of the device is due to its properties: manual and automatic control within 15 and 20 dB, maximum gain (up to 65 dB), shielding indication and coverage area up to 350 sq.m. The complete set is as complete as possible, nothing - even adapters and fasteners - is not required to be bought in addition, and in the instructions, according to users, the installation algorithm is described in detail.