10 best nail guns

For repair and finishing work, which is based on the connection of various materials, the compact SUMAKE F18 / 30 nailer will be the best choice. Its pneumatic device allows a continuous production process. At the same time, the engine has increased resistance to overloads and has a decent margin of safety. Spending 0.5 liters of air per shot, this tool needs an operating pressure of 4 to 6.2 bar - this guarantees it the best performance.

A distinctive feature of the SUMAKE F18 / 30 pistol is the use of finishing anchors, which are practically invisible in the material due to the lack of a head. This model has a capacious magazine for fasteners, designed for 100 nails, the maximum size of which does not exceed 30 mm. It is very comfortable to work with this pneumatic tool due to its light weight and comfortable handle with anti-slip coating.

The Metabo DKNG 40/50 compact pneumatic type nailer, which is also designed for stapling, is the best choice for interior finishing work such as installing skirting boards, wood paneling, etc. Ergonomic design combined with light weight (1.1 kg) allow you to use this tool in the most inaccessible places. When choosing equipment, you should pay attention to SKN nails 15-50 mm long, and staples 15-40 mm in size. This gun demonstrates excellent performance, with a compressor pressure of 5-7 bar. In this case, the air consumption per stroke is 6.6 liters.

Made of composite material, the body of the Metabo DKNG 40/50 nail gun has the lowest level of vibration during operation. This model provides protection against overload and accidental start - the safety of the operator is paramount. Due to the presence of a convenient air outlet, dust and turbulence do not interfere at all during the working process. The Metabo DKNG 40/50 nail gun, like all products of this manufacturer, is distinguished by its reliability and the longest service life.

The Fubag N90 pneumatic nailer allows you to perform a large amount of work with virtually no interruption and operator fatigue. Because this tool runs on compressed air, with an approximate flow rate of 120 l/min, it presents the lowest flammability during the manufacturing process.The magazine of the Fubag N90 nail gun is located at a convenient angle relative to the working surface, and is designed for 50 nails with a section of 2.8-3.8 mm and a length of 50-90 mm. At the same time, the replacement of equipment is carried out very easily and quickly. During operation of this model, it is necessary to provide a pressure at the compressor outlet of 4-7.5 bar, while the recommended diameter of the air supply hose should be 3/8 inch.

The Fubag N90 nail gun is not light weight, which is 3.75 kg. At the same time, it is absolutely indispensable when performing certain types of work, especially at an angle that cannot be handled with tools of other brands. To ensure comfortable holding of the gun with one hand during operation, it has an ergonomic handle.

The electric gun ZUBR ZSP-2000 is perfect for solving various repair and construction tasks using nails and staples. The tool's power consumption of 2000 W is enough to provide a workflow speed of 20 beats / min.At the same time, depending on the characteristics of the material and the size of the fastener, you can adjust the impact force. This electric gun is compatible with 55 staples and 300 type nails, with a possible minimum length of 15mm. Despite its compact size, the presented nailer demonstrates the best performance, which is ensured by the high frequency of operations.

The model provides a two-level protection, which excludes accidental pressing and activation of the driving mechanism in conditions of its loose fit to the surface. The presence of a metal staple holder and a hardened striker in the ZUBR ZSP-2000 nail gun has a positive effect on the service life. The attractive price of the power unit greatly enhances the characteristics of the tool, making the model one of the most popular on the market.

The DeWalt DCN 692P2 cordless electric nailer is a professional tool designed for high performance installation work with the longest nails. To be able to hammer fasteners with a length of 59 to 90 mm, this model has the function of adjusting the force of impact and power. Also, the device has two modes of operation - single and high-speed, which guarantees not only accuracy, but also the maximum efficiency of the production process.

Thanks to the brushless motor design of the DeWalt DCN 692P2 nail gun, the tool demonstrates not only the highest performance, but also has an increased service life. Also, the device provides optimal comfort and safety of the operator during the performance of work, and compares favorably with the minimum levels of noise and vibration. The compact size of the gun allows it to be used in the most inaccessible places. Continuous operation of the tool is ensured by powerful batteries with a capacity of 5 Ah, of which there are 2 pcs in the kit. The device is delivered in a convenient case that simplifies its storage and transportation.

The presented model of the nail gun will become an indispensable assistant for a professional who specializes in the serial fastening of any materials to a wooden surface. The main advantage of Makita DPT 353RFE is the presence of a battery with a voltage of 18 volts and a capacity of 3 Ah, which guarantees autonomous operation of the tool. This pistol comes with 2 Li-ion batteries, the charge level of which can be monitored on a special indicator. Automatic battery protection prevents their full discharge and failure due to overloads.

With this electric tool, working with long nails is greatly simplified. The magazine with a capacity of 130 fasteners is very easy to load pins with a length of 15 to 35 mm. At the same time, it is possible to set the required driving depth to ensure the highest fastening accuracy.For work in poorly lit places, the Makita DPT 353RFE nail gun has a backlight. Also, the device is equipped with protection against accidental start-up and a convenient bracket for possible fastening to a belt.

The STANLEY 6-TRE650 electric nail gun from the world's most famous tool manufacturer is designed for professional use. With its help, any material is quickly fixed to the surface using special nails, leaving no marks on it. This model is compatible with 5 different sizes of consumables: 15, 19, 25, 30 and 32 mm. To save time when working with the STANLEY 6-TRE650 nail gun, it has a capacious magazine for pins with the possibility of their quick replacement through a special window.

A cable length of 2.5 meters is enough for convenient movement with a tool around the job site, but, as a rule, an extension cord is indispensable. Safe control of the gun is carried out with the help of a trigger, it is also possible to adjust the impact force, adjusting to a specific material. For the convenience of the operator, during long work, the STANLEY 6-TRE650 nailer has a rubberized handle for a secure grasp and hold of the tool in one hand. The presented gun differs from pneumatic models in increased productivity, significantly reducing time costs.

The presented model of the SPIT Pulsa 800P+ nail gun guarantees the fastest and safest installation of any structures and materials. This tool demonstrates excellent speed, firing 2 shots per second. At the same time, the implementation of each requires only 4.5 kg of effort. The effectiveness of the device also depends on the degree of refueling of the gas cylinder, which allows you to perform up to six hundred shots. To load the gun, a magazine for 20 nails is provided, which can be replaced with a more capacious one (50 pcs). The length of fasteners designed to work with SPIT Pulsa 800P+ can vary from 15 to 40 mm.

The distinctive feature of this nailer is the Start & Go function, which saves energy significantly. In the event of a minute of downtime, the gun will automatically turn off as soon as there is a movement - the device will be ready for work again. The presence of a display that shows the level of charge of the battery and cylinder will save time on the forced stop of the production process.

For high-volume concrete or steel installation work, the Toua GSN F1 gas nailer is the best choice, as it delivers the highest nailing power for reliable fastening. This tool does not require any additional care or lubrication, as well as special skills. A distinctive feature of the model is the widest operating temperature range from -15 to +50 °C. Also, this gun can be used in the absence of a compressor and electricity.

The capacity of the gas cylinder is enough for 1000-1400 blows, which the Toua GSN F1 nail gun produces with a force of 100 J. Due to the fact that the tool is lightweight, it is very convenient for them to carry out electrical work and shooting to the ceiling. This gun has a set of 2 barrels: one is used for shallow depth, the second - with a soft nozzle for maximum penetration. This ensures the integrity of the working surface of the material. The kit comes with two Li-Ion batteries with a capacity of 1.5 Ah, thanks to which you can shoot about 8000 nails, gas cylinders would be filled. You can keep track of the battery level thanks to the indicator on the handle.

Professional nail gun Lixie LXJG-III, featuring high power, belongs to the gas type of tools. With it, you can carry out installation work with the most durable materials, such as steel, concrete, brickwork, etc., without requiring pre-drilling.A serious amount of work on zeroing in plastic or steel parts, performed in a short period of time, is possible due to the high speed of the tool. The nails that are needed to work with this gun should be 17 -32 mm in size.

The Lixie LXJG-III nail gun is equipped with a 10,000 mA battery that takes 150 minutes to recharge. The volume of the gas cylinder of this device, provided that it is fully refueled, is enough to drive 1250 nails. Fastenings made with this pistol are highly accurate and reliable. The package includes 2 batteries, charger, earplugs, goggles and a durable case.