Top 10 Fire Detectors

One of the most popular and affordable models of fire detectors in the domestic market, Frontier IP 212-142 is simple and at the same time reliable. This device is equipped with an optical-electronic sensor that is able to capture even the smallest amount of smoke, without reacting to high temperatures or bright lights. Due to the presence of a microcontroller in this model, the possibility of false positives is reduced to almost zero.

In the event of a fire event, this smoke detector will notify you of this within 6 seconds with a loud sound signal, the strength of which is 85 dB. Since the presented smoke sensor can operate in a wide temperature range from -10 to 55 °C, it can be installed both in heated residential buildings and in cold garages or commercial pavilions. Autonomous operation of the detector is ensured by a 9 V battery of the “Krona” type, in the event of a critical discharge of which the indicator will notify you with a special signal. The operational resource of this device is designed for 10 years, but thanks to its simple design, it can work much longer.

The best choice for the fire protection of a house, apartment, as well as any other unheated object will be the combined detector "IDT-2". This model is designed to be connected to various control panels and is used as an integral part of automatic warning and fire extinguishing systems, as well as fire alarms.This detector assumes continuous round-the-clock operation in the widest range of operating temperatures from -40 to 55 ° C, and at the same time consumes a current of not more than 0.15 mA.

A distinctive feature of "IDT-2" isp. IP 212/101 is the presence of a detector that recognizes not only smoke concentration, but also temperature fluctuations. In the event that a substance ignites with minimal smoke emission, the device will quickly respond to an increase in degrees in the room, and will turn on an alert if the changes are more than 5 °, or exceed the critical level of 54 -70 ° C. This detector is economical, easy to maintain and designed for a long service life.

The smoke detector reacts to smoke (fires), which can be removed from it at a distance of up to 150 m. The optical infrared sensor has a high sensitivity and remains operational when the room illumination is not more than 12000 Lux. The minimum service life of the device is 10 years. The detector tolerates temperature extremes well, functioning without failures in the range from 55 to -25 ° C, as well as in conditions of high humidity (no more than 93%).

This smoke detector will be the best choice for spacious hangars and warehouses, garages and other non-residential premises with a large area. For a house or apartment, its use is not entirely advisable. In addition, the fire detector does not provide for autonomous use, but works exclusively as a composite device in a fire and security alarm. Connection with the control device (purchased separately) is carried out via radio.This greatly simplifies installation work and saves time.

The optical smoke detector allows you to track the fire situation over a large area - up to 800 m (line of sight). Such high sensitivity allows you to fully control the situation in hangars, warehouses, garages. The RSD1 smoke detector can also be used in an apartment (residential building). Its design provides the option of autonomous use.

In the event of smoke, the device will give an audible and optical alarm. If the sensor is connected to a fire and security alarm, the notification will be duplicated via the wireless interface (using a radio channel). High sensitivity and large coverage area are clear advantages of this model. The device works from an autonomous power source (the battery lasts, on average, for three years) and is easy to install.

The ALFA ALCO 01 radio channel fire detector installed indoors is able to notify residents of a house or apartment, employees of commercial and social enterprises and other facilities about a fire threat as soon as possible. This will protect personnel from the possibility of carbon monoxide poisoning, which can be deadly. The device is equipped with an electrochemical sensor that detects the presence of CO2 in a closed space with the highest accuracy.When anomalies are detected, it immediately emits a pulsating sound signal with a power of 85 dB. When detecting smoke with a photoelectric cell, the smoke detector also triggers the built-in sounder.

The presented alarm is made of heat-resistant plastic and guarantees uninterrupted operation in the temperature range from -10 to 60. To replace the power supply in time, this device has a low battery alert function. High sensitivity and balanced cost make this model one of the most popular fire fighting equipment on the market.

The SD-120SA GSM fire detector is a stand-alone device and does not require any expensive security systems to operate. The power supply of the device can be either from an external network adapter DC 12 V, or autonomously (battery type "Krona" 9 V). At the same time, a high-quality battery can last for 2 years of sensor operation (when the battery is discharged, the owner will receive a corresponding message). An active mobile phone card is required to contact the owner. When installing in a country house or garage, you should make sure that there is a stable coverage of the network of the selected telecom operator, otherwise you can not count on a clear alarm. Especially for such verification, a manual testing system is provided.

If the smoke detector is activated, alarm messages (SMS) are sent and preset numbers are dialed (up to 10 subscribers can be notified).In addition, an audible alarm will be activated, which is quite prudent if an apartment or other residential area is equipped with the device. When installing the sensor at remote sites, the temperature mode of operation should also be taken into account. Reliable operation is guaranteed by the manufacturer in the range of 50 to -10 °C.

To ensure peace and security in your own home, the best solution would be to install an autonomous fire detector. The Honeywell 2630B model can be considered as the optimal choice, which is easily mounted on the ceiling of an apartment or any other enclosed space, without requiring additional efforts or costs. The presented device is equipped with an ultra-sensitive sensor that monitors the content of smoke in the air every minute and in case of even a slight deviation from the norm in less than 20 seconds. activates the fire alarm. In addition to the flashing light diode, a rather loud sound signal with a power of 90 dB is turned on.

An additional advantage of the Honeywell 2630B smoke detector is the presence of a built-in lithium-ion power supply, the capacity of which is sufficient for continuous operation of the device for up to 10 years. For adequate operation of the alarm, you should follow the manufacturer's recommendations for installation and do not exceed the allowable temperature regime. It is not recommended to install such a device in a room without heating, because below -10 °C its stable operation is not guaranteed.

When looking for a device to control and reliably protect an apartment or a private house from fire, the REDMOND SkyGuard RSD-R1S will be the best choice. In the event of a source of smoke, this device instantly turns on the warning system in the form of an audible signal and a light alarm. This compact fire detector also supports the Ready for Sky Guard mobile application, through which it sends an emergency alert to a mobile phone. This guarantees the best opportunity to take timely action to eliminate the fire in the shortest possible time.

The presented smoke detector operates autonomously, powered by AAA batteries, and is designed for installation in rooms up to 20 m². If there are several rooms in the house, you can, if desired, install additional REDMOND SkyGuard RSD-R1S detectors - the application supports work with several control devices. This signaling device is very easy to install, and it can be controlled remotely using a smartphone.

This smoke detector is part of the Hiper Smart Home system, which allows you to control appliances and various sensors through an application on your smartphone. A fire detector can be either the only device in this service, or it can be part of a whole group of control equipment. The connection to the network is wireless, via a Wi-Fi channel.To search for it, there is a single button on the body of the device (activation occurs by long pressing).

This equipment is more suitable for a residential apartment or house, sometimes an office. In a word, the object must have an active Internet connection with a Wi-Fi connection. It will be problematic to control remote objects (warehouse, garage, cottage, etc.) using Hiper IoT S1 in our conditions. The smoke sensor is configured in such a way as to minimize false alarms - it will leave active smoking in the room without attention. But in case of severe smoke, the detector will send a notification to the device in which the application is installed. Also, the alarm signal will be additionally duplicated with the help of an audible alarm.

The best fire safety in an office, shopping center or private residential building will be provided by the Ajax FireProtect white smoke detector, which can operate both in standalone mode and when connected to the Ajax Hub alarm system. This detector is equipped with a photoelectric sensor, with the help of which the device detects smoke and, in case of confirmation of the presence of smoke, activates the built-in siren. To ensure better safety, this device also has a thermal sensor that reacts to a sharp rise in temperature. The device turns on a light and sound alarm when the ambient air is in the range of 54-65 °C.

The Ajax FireProtect white fire detector is delivered fully prepared for operation and is mounted to the ceiling in a matter of minutes using a special SmartBracket mount. You can control the sensor remotely using a mobile application. The device is equipped with a reliable system of protection against opening and jamming. A special function of testing the smoke chamber will tell you in time about the need to clean it.