10 best hoods without venting

Gas stoves, hobs and ovens, hoods - all Darina appliances are in demand among customers due to their low cost and good functionality. So, FLAP 501 W is a compact and practical model of extraction technology for the constant provision of clean air in the kitchen. Its main feature is the excellent extraction of fire and steam, which are inevitably formed during the preparation of various dishes.

It is not required to connect the device to the ventilation channel, cleaning is carried out by filtration through a carbon filter (included in the package together with an aluminum anti-grease filter). Its service life is 3-6 months, depending on the intensity of use. For a replacement, contact any service center with a network of 180 addresses throughout the country.Judging by the reviews, the device is quite reliable, and its only drawback is the high noise level at medium and maximum speeds.

The Best Moon hood was first presented back in 2011, and went on sale in 2012. It is not surprising that the model has not morally aged since then - its design is made in high-tech style, which has not lost its relevance over the past decades, and the technologies used were already ahead of their time: ceiling mounting type, independence from the location of the ventilation shaft, Soft Touch control, auto-off timer.

An important design advantage is the perimeter suction technology. It allows you to increase the intensity of air purification, reducing the energy consumption of the device and reducing its noise. So, Best Moon is able to clean 550 cubic meters in 1 hour. m. of air, producing a maximum noise level of 69 dB. She is very easy to care for. It is enough to wipe all the panels with a clean cloth and the unit will shine again in all its glory, preventing grease and soot from settling on furniture in the kitchen.

It is believed that built-in hoods absorb more fumes than mounted ones. Particularly effective are structures that are built not above the stove, but next to it - just like the Elika Adagio model, 90 cm wide. Its performance is truly a record - 1200 cubic meters.m / h, mainly because it does not allow polluted air to dissipate and mix with the main air mass. Not the last role is played by the filtration system, which consists of a grease trap and a carbon filter (both consumables are included in the kit).

The design does not require installation to a special pipe for air removal. The speed of work is selected by electronic control from 3 degrees depending on pollution. To illuminate the working area, it is proposed to use a 14 W neon lamp with a glow temperature of 6500K (cold shade). A great option for buyers who don't have upper cabinets in their kitchen, or when they're just looking for something special.

The JetAir trademark belongs to the well-known Italian company Elica, which specializes specifically in the production of hoods. The brand is well known to Russian buyers and has managed to earn a positive image. For those who are looking for a device without a ventilation shaft, he offers the updated Gisela series. It includes three models of basic colors with the possibility of installation in the center of the kitchen or against the wall. The design assumes operation only in the recirculation mode, i.e., air purification through grease and carbon filters.

Despite the relative cheapness, the device has a modern set of functions and is equipped with a set of filters out of the box. The series has already been introduced to the market before, but had halogen lighting and slightly different technical characteristics.Today, all models come with LED backlighting, a convenient and easy-to-learn electronic control panel, and a choice of 1 of 3 speed modes.

Every second hood sold in Italy belongs to the Faber brand. He also held the lead in the mass production of fume hoods for household kitchens - he introduced his first Plexiglas model to the market back in 1958. Today, each development, in addition to its own unique style and full range of functions, has a certain feature that makes each unit unique.

So, the Faber Lybra hood stands out among its analogues with the presence of Up&Down technology. Thanks to it, the dome can descend vertically to a minimum height above the evaporation zone and increase its efficiency without increasing the intensity of work. Separate words of praise deserve the quality and appearance of the case: it is completely made of glass and stainless steel and enclosed in a cubic shape that fits elegantly into the kitchen interior.

The circulating (i.e. not requiring venting) island hood Falmec LOOP was developed in 2018. With the unique CircleTech air filtration technology, the cleaning block is installed horizontally, and the filter surfaces are spherical in shape and surround the engine from all sides.This solution provides the maximum absorption area on the one hand and the minimum noise level due to the uniform distribution of air flows on the other.

Falmec's exclusive development is also the combined carbon filter Carbon.Zeo with two types of minerals. It has a very long service life - at least 3 years under normal operation. Every 1.5 years, the filter is recommended to be restored by a 2-hour roasting in an oven at 200 °C. The replacement process is not difficult, since the filter is located in the lower, most accessible part of the hood.

Unlike other manufacturers, who tried to play on the originality of their models, Smeg went the way of "hidden design". No one will suspect that the elegant white glass panel on the kitchen ceiling is actually a powerful KSC120B hood with a serious capacity of 830 cu. m / h and full functionality: 3 speeds and intensive mode, indication of contamination of the carbon filter, electronic control with remote control.

Above the hob, you can turn on the backlight of 4 energy-saving lamps, and it does not require turning on the hood itself. A special device allows you to program the device to automatically turn off 30 minutes after the end of cooking. The 24-hour air purification mode is also interesting: it allows you to regularly filter the air from accumulated odors throughout the day, get rid of excessive humidity and thereby maintain an ideal microclimate in the room.

All Sirius hoods - both with and without a vent - are assembled manually at a factory in Italy. The manufacturer claims that he selects the most reliable materials for his offspring and creates parts from them with a laser with microscopic precision. Before being put into mass production, the most important structural element - the engine - undergoes a series of mandatory tests. The result is a high-performance yet very quiet machine: at a maximum work rate of 960 m3/h, the SILT 18 produces a mere 50 dB.

The body of the unit is made in the form of a ball and has a small size. This design not only allows installation in any area of ​​​​the kitchen, but also serves as its kind of decoration. At the bottom is a 3W LED lamp that can brightly illuminate the work area. For control, a remote control with 5 buttons is offered: turning the backlight on and off, 4-level power adjustment, and a 10-minute timer.

The next worthy model is EASY 50 with a recognizable chandelier design in black, gray and silver. She, in addition to excellent integration with the interior of any kitchen, has another significant advantage - almost complete noiselessness during operation. At the first stage of power, the noise level does not exceed 45 dB, which is comparable to the noise of a refrigerator, and at maximum it rises to 60 dB, at which it is quite possible to talk or listen to music.

The device works without a vent to the ventilation, but is capable of passing up to 800 cubic meters. m./hour. This is enough for large kitchens 20‒25 sq.m. with high ceilings. Filtration is carried out by a carbon filter with an extended service life of up to 3 years. A signal about the need to clean it or completely replace it gives a special indicator. An electronic control touch panel is also provided, with the help of which the standard or intensive mode is easily and simply selected.

Berbel is a subsidiary of the international concern Wesco, specializing in home ventilation systems. Focusing on the development of the latest technologies in a narrow area has allowed the brand to take a leading position in the world and bring to the market fume hoods with unique technical characteristics. So, the headliners of the company, the Berbel Smartline hoods, received a patented air purification technology.

It consists of a centrifugal separator that collects up to 96% of fat and is easy to clean in the dishwasher, and a carbon filter with a double throughput, providing the highest performance - up to 630 m3/hour. The manufacturer complemented the impeccable technical data with an innovative design developed in close cooperation with the studio of the famous Stefan Ambrosus. In 2017, he received 2 awards for it at once - Innovation Iconic Awards and Reddot Design.