10 best ice rinks for kids

Many choose a one-piece ice-trough with the prospect of a child's growth. The dimensions of the Big M model just meet this requirement: the width of the product is 60 cm, the length is 78 cm. The feature of the product is a large plastic relief, so it is easy to clean. Such an ice cube will really last a long time, while maintaining a presentable appearance.

If the hill is high and steep, safety hard handles on the sides will protect the rider from flying out of the ice when descending. A thin carrying cord will make it easier for a child to get up, but it doesn't feel strong enough to lift or just roll a person on a flat surface. By the way, the weight of the ice cube is only 1.1 kg, and this is one of the lightest models in the ranking.

When a child is burning with the desire to ride a slide, it is impossible to stop him. It is for such an urgent purchase that economy class goods were invented. A simple, triangular-shaped children's sled is a durable alternative to the piece of cardboard or rubber used by resourceful kids on slides.

Ice trough does not require any special skills or knowledge before use. They just need to sit down and move down the mountain at your pleasure. The lack of handles and other belay options does not allow us to recommend the model for a steep descent. Also, the manufacturer does not provide a cord for lifting the trough up.But the compact dimensions (37x43.5 cm) allow you to wear the product under your arm.

Ice for a rapid descent is made of molded frost-resistant plastic. The model resembles a trough, complemented by textured handles to neutralize hand slip. The round rigid model can withstand loads up to 60 kg and goes faster with a heavy rider. Small children are not able to reach the handles and cannot ensure complete safety on the way, so they either ride down the hill in the arms of a parent, or move out on their own from the gentlest slopes.

The reviews say that it is convenient to go down on the "Snow Ramp" while sitting with your feet forward or on your knees. It is thanks to the simplicity of the design that the user can come up with the best non-standard position for the descent.

The dual system allows an inseparable couple of friends or brothers and sisters to move down the hill at the same time. Moreover, it is possible to organize both a joint descent and a separate one. A special lock fastens both parts, and if you open it, the device will turn into two ice cubes. The landing of the child is carried out on a corrugated surface, so the sliding of the body is slightly reduced.

If you separate the plates into single elements, the first participant in the skating uses a strap to transport it up, and the second one carries it by the handle. Judging by user reviews, the plastic has a very decent quality, which allows it to withstand numerous bumps during crowded skiing.

The simplest ice-plate with a diameter of 65 cm can withstand up to 80 kg, that is, both children with teenagers and adults of a miniature build can ride on it. On the sides are handles that are responsible for braking: if you pull them towards you, the plate will slow down. The height of the sides is 7 cm, and this is enough for the structure to roll and not turn over (user opinion).

The German brand KHW manufactures products in Thuringia and compulsorily marks products with CE (European Conformity Mark). This means that the product meets the requirements of EU directives and European standards, which means that it is safe for health and the environment.

Ledyanka "Minibob" is an improved sled made of durable plastic. Children intuitively understand how to fit inside: you need to sit on an ergonomic seat and stretch your legs comfortably to the raised support. For a safe descent, a pair of handles on the sides are thought out, and for easy climbing up the hill there is a wide cable. The length of the model is 90 cm, the width is 40 cm, and the maximum allowable load is up to 50 kg.

On the Web, they say that it is very convenient to go down, even if the snowy track is steep and long. Thanks to the raised nose, snow does not fly into the face or its impact is minimal. A low emphasis for the back of the child and a brake are thought out, so there are no complaints about safety.

Structurally, the model is a mixture of ice and snow scooter: an ergonomic removable seat, a joystick handle for holding and a wide ski for sliding. Balancer is the best name for the device. Children learn to balance when going down a hill. At the same time, there are three degrees of balance complexity and, accordingly, three seating positions in height. The more a person rises above the ski, the more difficult it is for him to maintain the position of the body.

Absolutely everyone likes the attractive design of the balancer, besides, you can choose the color to your child's taste: blue, pink, green, blue, black. Cheerful adults will also not stay away from winter fun, because the skiing device can withstand even 120 kg.

Skiers have a "carving" skiing technique, which consists in constantly performing a turn maneuver. At the same time, the speed increases, and the center of gravity shifts towards the turn. That is why the narrowed shape of the carv-type ice is recognized as the most maneuverable. The steering of the model is thought out especially for children, so that it is easier for them to master turns at speed.

The owners believe that the strong plastic at the base of the product is the most durable material, but it is important to respect the weight limits (up to 50 kg). Plastic sleds can easily withstand several seasons of active skiing on a hill. The brake is responsible for the safety of movement, you just need to learn how to use it correctly in practice.

A snowboat is a special design for descending a hill.In fact, this is the same ice rink, only the base is made of a gas-foamed polymer, which is additionally packaged in a durable textile cover. Materials are frost-resistant, withstand up to -24⁰С. The comfort and safety of the rider is achieved through a sitting position.

When descending, the child takes the safety handles on the sides, the dimensions allow you to sit comfortably. The product is 50 cm wide and 80 cm long. Users like the quality of the details and that the handles are attached with a high-strength seam. If the boy is passionate about robots and transformers, the model will be the best gift.

Not only children like to ride on a snow-covered hill. And if parents, uncles and aunts join the winter entertainment, there will be no limit to children's joy. It's good that the trend of joint leisure is supported by the manufacturer 1 TOY, which produces the most versatile ice cube. The product is suitable for both a child and an adult, since the durable classic PVC foam construction is designed for a weight of up to 100 kg.

Polyvinyl chloride as a base causes mixed feelings among the owners. On the one hand, the material is thin and wears out quickly with active skating. It is possible that several such models will have to be changed during the season. But the lightness of the product allows you to go quickly and easily drag the ice cube up.