10 best heat presses

Opens the rating of the best miniature vacuum heat press Bulros T-3D mini Phone. The device, which can be placed on a table, quickly copes with the sublimation of images on phone cases. Moreover, carriers of various sizes are placed inside the vacuum chamber. The technology combines heat with pressure to prevent unprinted spots. 2 operating modes are available: with silicone clamps and special vacuum nozzles. All accessories are included.

Bulros T-3D mini Phone can be used for plastic, convex or concave glass, stones, crystals, dishes. The main thing is the small size of the carrier. It is unlikely that it will be possible to print large print runs due to the slow speed, however, the heat press does an excellent job with piece goods. The temperature inside the chamber reaches 200 degrees. The kit comes with a cooling platform, two spare seals, a disk with instructions.

MAXX Press by STAHLS MAXX is the most expensive device in the ranking. Moreover, it is one of the most powerful digital heat presses on the market. The brand patented pressure regulation, added digital temperature and time indicators. The device is universal, suitable for T-shirts, caps, mugs. However, replacement rollers are sold separately.Another patented technology is the automatic regulation of pressure and heat distribution. Not a single place in the picture will remain unprinted.

MAXX Press is ideal for large media, with image resolution up to 1200 x 1200 dpi. The brand also offers printer ink to print the picture. They are harmless, water-based. You can transfer a picture directly from a flash drive. Despite the high power, the equipment takes up little space. The lid opens 65 degrees, making it quicker and easier to position the media on the heating element.

Velles VP 1520 C is designed for baseball caps and caps with a visor area up to 15x20 cm. The device has a power of only 300 W, but this is enough to reach a temperature of 225 degrees. Getting into the list of the best device is due to the design of the nozzle. It evenly stretches and smoothes the fabric, providing the most accurate image application. The heat press is opened and closed manually. Teflon work surfaces are designed for fabric sublimation.

The mechanism provides for manual adjustment of the pressure with which the press acts on the cap. What is important - the characteristics change instantly, literally in 2-3 seconds. This is very useful if you suddenly find that the set pressure is not suitable for printing. No more image transfer errors. The process data is visible on the digital screen and the information is updated in real time. Even beginners manage to completely control sublimation.

The Transfer Kit APDS-15 is a fairly expensive device designed to quickly process large orders. Two flat working surfaces of a pneumatic thermal press print on textiles, ceramics, cardboard, plastic and metal. Any media without bulges. The impressive size allows you to save time on production, produce souvenirs in huge quantities. Despite the high power, the device is easy to operate.

It is convenient to monitor the temperature and time using the electronic panel. It also has buttons for switching parameters. The pneumatic actuator automatically opens and closes the device. However, for proper operation, the device needs an air compressor, which is purchased separately. It takes only 5 minutes to warm up thanks to the power of 1450 watts. Dimensions correspond to professional use: 97 kg of weight, almost a meter in height. The manufacturer gives a 6 month warranty.

Bulros T-3D copes with any complex volumetric products. Vacuum sublimation in 3D is packaged in a compact device. The drawing is carefully reprinted onto the media under the influence of high temperatures. Heating is evenly distributed over the surface during the entire procedure. It is the vacuum technology, according to the brand, that does not leave unprinted stains. Drawing on special paper can be transferred on a conventional inkjet printer. The main thing is to purchase sublimation ink.

Bulros T-3D is suitable for plates, mugs, spoons, phone cases, stones, any curved glassware, household items. The carrier is placed in a vacuum thermal chamber, where the workpiece passes to the desired surface. Temperature and pressure are set by the user. The final image is not afraid of environmental influences. You can print 2 plates, 6 covers or 12 mugs at one time. Comes with heat resistant gloves.

The most budget thermal press of the rating from INKSYSTEM easily copes with its only task: sublimation printing of images on mugs. With it, you can transfer photos, prints, inscriptions, paintings. The device is controlled by buttons on the digital control panel. The settings are simple: just set the time and timer, specify the correct pressure and wait for the beep. One mug takes about 20 minutes. Only cups of standard sizes are placed in a small unit.

The durability of the image largely depends on the quality of the ink. Then they are not afraid of aggressive detergent components, humidity. The device is located horizontally on the table, weighs only 9 kg. The timer ranges from 0 to 999 seconds, the temperature ranges from 0 to 399 degrees. Judging by the reviews, even users who have encountered sublimation for the first time can easily cope with the task. The brand gives 12 months warranty.

Vertical flip Transfer Kit ZHT-15 with a flat surface is suitable for printing images on T-shirts, metal, cardboard, plastic, paper. The best qualities of the device are manifested when transferring images to sports uniforms, special clothing, rugs, signboards, and plates. Despite the Chinese production, reviews confirm the reliability of the design. And the vertical opening of the lid saves a lot of space. Of the additional chips there is an electronic control of temperature and time.

The process of transferring the pattern is displayed on the LED display. The pressure is controlled mechanically by changing the position of the manual regulator. It takes no more than a minute to set up, there are only a few buttons on the case. The timer can be set from zero to 99 seconds. The device takes up to 15 minutes to warm up, it works from a 220V network. The manufacturer gives a 6 month warranty.

To avoid having to buy 8 heat presses for large souvenir printing companies, the Bulgarian brand Bulros created the K-8 model. It is suitable for transferring drawings to a variety of media: metal, ceramics, textiles, leather, mugs, T-shirts, cardboard. A rich set of nozzles justifies the high cost: 9 pieces of various sizes and shapes. A modern microchip controls temperature and time. The user only sets the initial settings, the rest of the thermopress does itself.

Sublimation information is promptly displayed on the LED display, updated in real time. When the user does everything correctly, the indicator light flashes.The unit quickly gains the desired temperature, maintains the set time, emits a sound signal. Then it cools down by reducing the pressure (adjustable manually). Working surfaces are made of heat-resistant Teflon.

Representatives of design bureaus, advertising agencies, manufacturers of goods for promotions should pay attention to INKSYSTEM. This model is the best for cap printing. The device quickly and efficiently transfers inscriptions, photographs, prints. The print result does not crack, does not wear out after washing, does not fade in the sun. A nice bonus is the simplest control. It is enough to choose the right temperature and pressure, the device will do the rest. At the end of the work, a loud signal will sound.

The temperature is adjustable from zero to 399 degrees, the timer is from zero to 999 seconds. In a budget device, the manufacturer was able to add several convenient features. For example, the timer starts automatically when the heating panel is lowered manually. The characteristics of the procedure are displayed on a digital display. Moreover, two printing modes are available: sublimation and thermal transfer. The unit weighs 15 kg and is placed on the table.

Bulros T-10 is a compact machine for printing on mugs and similar cylindrical media. Such a heat press is just what a small workshop needs. Bulros T-10 has the simplest but most reliable design. All technologies are enclosed in a flexible heating element the size of a standard mug.The manual temperature control system (from 90 to 220 degrees) and the timer (up to 400 seconds) are responsible for the accuracy of the settings and the speed of work.

Let the modest size of the heat press do not deceive you: the print is of high quality, resistant to moisture, mechanical friction. Sublimation parameters are displayed on the LED display. The working area is treated with Teflon, which does not transform from high temperatures. The reviews note thoughtful ergonomics and high-quality assembly. The device weighs only 4 kg and fits on a small table.