10 best cable cutters

A professional hand tool for industrial electricians was in this position solely because of its cost.The characteristics of the cable cutter make it extremely easy to cut aluminum and copper wires (including stranded wires), the diameter of which does not exceed 45 mm. The quality of the cable shears, however, this applies to all CIMCO tools, does not cause any complaints at all, even among the most picky users.

Electrical installation work will take much less time if you use this cable cutter. Laser sharpening of cutting edges, absence of metal crumpling and high cutting accuracy were appreciated by specialists. Users who have worked with this tool positively note the operation of the ratchet mechanism and the locking grip that securely holds the cable cutter in the wire cutting area. The blocking system was also not superfluous.

One of the best cable cutters for professional work is produced by the American manufacturer Irwin. This brand is widely known for the high quality of electrical tools, so there is no reason to doubt the reliability of the original equipment. The wire cutters are designed to work with copper or aluminum cable up to 5 mm thick.

Two-component ergonomic pads (due to softness do not cause hand fatigue during large volumes of work) completely eliminate the slipping of hands - cable cutters are easy to operate with one hand. The coating of cutting edges made of chromium and nickel, followed by induction hardening, according to electricians, retains its sharpness during intensive work for more than one year. By adjusting the force, it is quite easy to get rid of the cable insulation with this tool.Such characteristics of the tool are considered by professional electricians to be the best basis for selection.

The German Wiha Professional electric Z cable cutter deservedly enters the top three. The impeccable quality of steel, polyurethane handles that fit comfortably in the hand, and sharp cutters guarantee efficient work with aluminum or copper wire. The cable splits without wrinkling, evenly - a hand tool (only 180 mm long) is best able to work with material whose diameter does not exceed 16 mm.

In their work, electricians note such advantageous aspects as the most excellent cutting ability and dielectric grips on the handles, which not only protect against voltage, but also prevent the cable cutter from slipping out of their hands. The equipment is designed for serious operational loads, and during intensive use for more than one year they do not completely lose their ability to easily cut the cable.

Forged metal cable cutter (working part) has a decent margin of safety, which, in fact, attracts the attention of electricians. It copes well with solid non-ferrous metal blanks, the diameter of which does not exceed 9.8 mm. Due to the increased lever of the handles (the tool has a length of 800 mm), even intensive work does not lead to excessive fatigue - it is very easy to cut the cable with the help of the Zubr "Expert".

At the same time, many electricians note the accuracy and cleanliness of the cut - the edge is sharp, there is no hint of metal crushing.In the installation of high-voltage networks, this is a significant plus of the tool, which should be noted. Even under the most intense loads, the cable cutter copes with the tasks set, demonstrating the invariability of performance throughout the entire service life.

There is nothing surprising in the fact that the German cable cutters KNIPEX KN were in our rating at the position of the best tool. The cutting edges and adjustable screw joint make it easy to work with cables up to 15 mm thick (except steel wire and cold drawn copper wires), ensuring a smooth cut. The advantage of this tool is the fact that it is made of tool steel that has been hardened in an oil bath - this preparation ensures a long service life of the cable cutter without losing its performance.

Electricians also note the low weight (220 grams) and the optimal length of the tool (165 mm), which allow them to work on cable separation without much effort. The blued surface reliably resists corrosion, and comfortable plastic pads give the handles excellent ergonomics. There is also a fuse - it reduces possible injuries to the operator's fingers.

The simple and reliable cable cutter FIT 41845 contributes to the comfortable work of the electrician when cutting insulating cables with a diameter of up to 18 mm.Excellent performance is provided by reinforced tool steel, from which the working part of the scissors is made. This also helps to increase the speed and quality of the work performed, which is confirmed by the majority of users in their reviews.

For more convenient and safer use, the cable cutter manufacturer FIT has coated the handles of the tool with a dielectric PVC layer. Blades retain their sharpness even with intensive use - the tool is able to cut wire even in steel braid.

Made of chrome vanadium steel with subsequent polishing and oxidized coating, the BERGER BG1234 cable cutter has the longest service life. Also presented hand tools are 20% higher than the strength requirements fixed by the international standard. With its help, even a novice electrician can easily cope with the task of cutting wires and cables when installing a new line or during a repair.

The handles of this cable cutter are made of a two-component material that provides better resistance to dirt and resistance to even the most aggressive chemicals. At the same time, scissors are not only comfortable to hold in your hand - thanks to their design features, they do not require any additional effort.

The high-voltage cable cutter of the Russian brand SHTOK is useful for both a professional electrician and a home master.Affordable cost does not affect the quality of the tool at all - reliable dielectric pads allow you to work under voltage, and a curly sharp blade simplifies the processing of cable ends made of non-ferrous metals up to 12 mm thick.

The use of chrome vanadium steel determines the durability of the cable cutter. Electricians note ease of use due to the presence of a return spring and the ability to adjust the screw hinge. The special shape of the sharp blade guarantees a clean cut without jamming the edges - for this tool, this characteristic allows you to confidently position the model as one of the best.

The model of KBT MC-05 scissors presented in our rating can be used in everyday life to facilitate the process of cutting aluminum and copper cables with a diameter of up to 11 mm. In addition, the presented cable cutter is designed for stripping wires with a cross section of 0.5 - 6.0 mm with the ability to adjust the cut diameter, for which the tool is equipped with six-position sharp blades. Electricians and ordinary users in general highly appreciate the effectiveness of this tool, which can significantly reduce the time spent on work.

The handles of the cable cutter have a rubber coating, which ensures not only dielectric protection, but also a confident grip that prevents the tool from slipping out of the hands. For maximum ease of use and safety, the cable cutters are equipped with a return spring and locking handles.

Despite the more than affordable cost, the ZUBR 23331-24 cable cutter meets all the increased requirements for this group of goods. The presented tool is designed for cutting flexible multi-core and single-core cables made of non-ferrous metals, whose cross-sectional area does not exceed 60 mm². The body of the cable cutter is completely made of high strength tool steel with anti-corrosion coating. Specially hardened cutting edges have the longest service life.

Special protrusions on soft rubberized handles perform a protective function, which consists in reducing the risk of hand contact with a high-voltage object. The dielectric body of the ZUBR 23331-24 cable cutter allows an electrician to perform work on cutting a conductor under voltage up to 1000 W.