10 Best Rust Converters

An excellent tool from a Russian brand, about which you can say "cheap and cheerful." Suitable for car care and any metal structures. For 25 years, it has established itself as an effective product that can cope with any task. Zincar not only converts rust into soil, it also creates a special active protective layer that prevents further destruction of the metal. This is one of the most effective mixtures, and compared to competitors, it is also very cheap. Deep cleaning occurs due to the content of aggressive components that corrode corrosion. They are toxic and must be handled with care.

The converter from RUNWAY is an excellent tool for processing any metal surfaces. It effectively copes with rust on car parts, trailers, and is also suitable for cleaning garden tools, pipes, etc. Experts call this composition one of the most effective, due to its record penetrating power. It literally "bites" into the metal, localizes the centers of corrosion and prevents further destruction of the coating. The result is noticeable in a few minutes, but, according to buyers, the full reaction will take at least 24 hours. In order for the active components to work one hundred percent, you first need to carefully clean the part or structure.

High-quality gel transducer from a well-known American brand. Boasts efficiency and unpretentiousness.To achieve a good result, it is enough to apply the product on the prepared surface and wait 2-3 minutes. At the same time, it is not necessary to clean the metal strongly - just remove loose rust and remove dirt. If you believe the reviews, then the modifier turns into an excellent soil and protects the base from destruction for a long time. Despite the fact that Permatex is almost non-toxic, it contains aggressive components. When working, you need to be as careful as possible - if the mixture gets on the car paint, then it will be very difficult to remove it and the coating may suffer.

If you are looking for an all-in-one converter to clean all metal surfaces: rusty, new, painted or bare, then Arexons Ferox Convertiruggine is the solution. It does not contain aggressive acids and solvents, so it does not corrode the paint and only affects the centers of corrosion. It forms a durable protective layer over which any coloring mixture can be applied: even water-based, even solvent-based. Also a big plus - Areksons can be used at air temperatures from + 5 ° C. Most mixtures are applied at a maximum of +10°C. Buyers complain only about the watery consistency, which is why the product often spreads.

Kudo products appeared on the Russian market in 2005, but have already gained popularity. This is largely due to the manufacturer's responsible approach to every detail - everything is thought out here: from the active composition to packaging. Converter for cars KV-70005 quickly converts rust into soil due to active components. At the same time, it can even be applied to paint, since the composition is neutral to paintwork materials and does not destroy anything other than corrosion. At the same time, many buyers appreciated the convenient form of release - the modifier is sold in small bottles, where the brush is fixed inside the cap, like in nail polishes. Of course, the capacity is very small and is more suitable for processing chips and scratches.

Eltrans Rust Converter is perfect for surface pre-treatment before painting. The mixture easily penetrates into micropores, localizes corrosion and turns it into soil. Zinc and tannins act so quickly that in 30 minutes you can cover the metal with paint or varnish. At the same time, it is not necessary to wash off the solution, which greatly facilitates the work. Happy with the low cost. However, since the mixture contains an acid, it is important to observe safety precautions when applying. Also, experts advise to cover the external parts of the car that do not need processing, so as not to damage the paint.

"Hi-Gear Rust Treatment No-Rust" is one of the most popular converters among Russian motorists. Due to the aggressive components, the composition quickly corrodes rust and turns it into soil. Judging by the reviews, the process occurs almost instantly and literally before our eyes the metal surface is cleaned. The mixture is available in the form of an aerosol with a powerful spray. Directed flow ensures uniform and deep penetration of the substance. If you believe the experts, then the protective coating really works and gets rid of rust for a long time. However, an active chemical reaction is accompanied by strong fumes, so High-Gear can only be used outdoors.

A universal remedy from the Russian brand Astrochem is comparable in quality to foreign counterparts. However, at a price it is 2-3 times cheaper than other formulations. The scope of application is not limited - the solution will turn rust into soil on cars, pipes, roofs, garages, garden tools and any other metal objects. Produced in convenient spray bottles, due to which it is easy to apply even to large areas affected by corrosion. The main disadvantage is toxicity. Gloves and goggles must be used during handling. In addition, the mixture can only be applied outdoors or in a well-ventilated area.

The Avtoprofi company produces two effective and inexpensive means for combating metal corrosion: a rust converter and galvanizing. By the principle of action, they are similar - they quickly and radically fight the problem, protect against subsequent destruction. Modifiers differ only in composition: the converter affects the coating due to iron-phosphate compounds, and galvanization due to zinc and manganese. At the same time, both tools are universal and suitable for processing cars, fences, fittings and other metal structures. Due to the aggressive components, the solutions will have to be carefully removed after cleaning, and they must not be applied to the paint.

The converter from the company Lavr will quickly get rid of rust even in the most neglected cases. It does not contain aggressive acids, so the product only affects the centers of corrosion and does not damage the metal. At the same time, it has one useful quality - with its help you can unscrew any, even the most corroded bolts. The liquid penetrates deep inside, loosens the screws and allows them to be moved. To achieve the desired effect, it is enough to apply quite a bit of the solution. After use, it must be carefully removed with a brush and water. To avoid trouble, the manufacturer and buyers recommend avoiding contact with electrical wires.