№ |
Name |
Rating |
Nomination |
1 | TMF Urengoy | 4.75 | The most popular stone |
2 | Termofor Convection Hummingbird 9U | 4.71 | Best price |
3 | Zharstal Sinara Meteorite | 4.63 | Large mass of loaded stones |
1 | Harvia M2 | 4.87 | The best ratio of price and quality |
2 | Vesuvius LEGEND | 4.79 | The most reliable oven |
3 | Grill'D Aurora 160 Short | 4.73 | original design |
4 | Varvara Kamenka | 4.66 | |
1 | Teplodar Domna | 4.65 | Best Performance |
2 | Ermak Uralochka-20 | 4.59 | The most technologically advanced oven |
3 | TMF Skoroparka 2012 Inox Lumina | 4.55 | Convenient service |
Bathing traditions exist in many world cultures, and Russians and Finns even created a kind of cult around this action. Until now, there is a clear division of the bath into Russian and Finnish. The key difference is temperature and humidity. The Russian bath does not have a high temperature inside the room. As a rule, at the level of the head there is no more than 60-70⁰. But there is very high humidity.There should be a lot of steam in a Russian bath, and the easiest way to achieve its formation is with the help of a stove-heater, where natural boulders act both as heat accumulators and as steam generators.
The design of the heater is extremely simple: the heat source heats the stones laid around the combustion chamber. If desired, water splashes on these stones and the same steam is formed. There are two types of heaters: open, where the stones are in plain sight, and closed.
Closed heaters retain heat better and heat up faster, but it is open designs that are most popular. The aesthetic component is not the last place here. Although heat the cluster nothing isolated stones are much more difficult, and they cool faster. Choosing between an open and closed heater should be based on these considerations.
It is also necessary to look at the type of fuel that the stove uses. Traditionally, this is firewood, which today is increasingly being replaced by pressed briquettes. They are more economical, cheaper, and the combustion effect is the same. There are also gas and electric versions. You won’t get the aesthetics of burning an open flame here, but in terms of maintenance, such structures are much simpler.
As for the choice of the design of the furnace, then everything is individual. They are wall-mounted, floor-mounted and even mounted. It all depends on the configuration of your bath and personal convenience. There are double stoves that can heat both the steam room and the dressing room. The main and, in fact, the only parameter is the thermal power, on which the area heated by the furnace depends. The thermal power is calculated based on the standards of the Russian bath, that is, the temperature in the room should not exceed 70 degrees.
Accordingly, the only parameter of interest to us is the heated area.Everything else affects only the durability and convenience of the design. For example, it is better to take your own cast iron stove. It's heavy, but it won't burn. In addition, cast iron retains heat much better, therefore, the oven cools down longer. But it will also take longer to warm up. In the modern market, steel furnaces are more common. They are cheaper and easier to manufacture. True, low-quality models burn out quickly, and so that you do not fall for such a product, we have selected for you the best heaters for a Russian bath in three categories at once, differing in the type of fuel used.
The best gas heaters for a Russian bath
Gas is the fastest and most economical way to heat the heater to the required temperature. Supplied under high pressure, it almost instantly brings the heater to operating mode. In addition, gas ovens are easier to regulate. There is always a valve on the nozzle that allows you to set exactly the temperature you want. With firewood, such a trick will not work. But gas ovens also have a significant drawback - the rapid burning of oxygen in the room. Baths with such equipment must be equipped with exhaust hoods, and ideally, if the heating chamber is located not in the steam room itself, but in the dressing room. All models in this category are made in Russia.
Top 3. Zharstal Sinara Meteorite
The container holds 55 kilograms of natural stones, which is 15% more than similar models from other manufacturers.
- Average price: 28,200 rubles.
- Heated volume (cubic meters): 18
- Dimensions (D/W/H): 75/52/77 cm
- Design: wall
- Weight (kg): 80
The best Russian banya is one where there is a lot of steam, and to achieve it, you need a lot of stones. This heater will fill a room with a volume of up to 20 cubic meters with soft steam, and all thanks to its large capacity. As much as 55 kilograms of stones fit in there. The design is closed, that is, the heat exchange is very high, and after complete heating, the stones cool down very slowly. True, it takes a long time to heat the oven, but thanks to the installation of almost any type of gas burners, this issue is easily solved. The furnace itself is completely steel. The wall thickness of the firebox is 6 millimeters, that is, you don’t have to worry about burning through, as well as about thermal deformation. And the water tank is easily mounted on top.
- Large stone capacity
- Possibility of installing an expansion tank
- Heats a large volume
- Big weight
- Difficult to clean off deposits
Top 2. Termofor Convection Hummingbird 9U
The cheapest closed type heater, costing about 30% less than its closest competitor with similar parameters.
- Average price: 16,700 rubles.
- Heated volume (cubic meters): 9
- Dimensions (D/W/H): 59/40/48 cm
- Construction: floor
- Weight (kg): 29
If you have a small Russian bath, and there is simply no place to place a large stove, be sure to take a closer look at this product. This is not only the most compact heater, but also the best in terms of price. It costs less than 20 thousand rubles, which is already a rarity in the modern market. This is due to its small size and average performance. At the same time, its efficiency is quite high. It is provided by a complex system of heat removal channels. The furnace is completely iron. Cast iron is not used in the construction, so do not overheat it beyond measure.However, with gas burners, burning through the walls is a rather rare phenomenon.
- Low price
- Very compact dimensions
- High performance
- Ease of operation
- Low visual appeal
- Thin steel walls
Top 1. TMF Urengoy
A product of a well-known Russian manufacturer, for which there are many detailed reviews and operating recommendations on the network.
- Average price: 23,900 rubles.
- Heated volume (cubic meters): 12
- Dimensions (D/W/H): 70/45/67 cm
- Design: wall
- Weight (kg): 43
TMF is a popular Russian brand with a lot of interesting products in its catalog. The Urengoy model can be safely called one of the most popular. It appeared on store shelves in 2012 and has been in high demand among buyers ever since. It's all about the high reliability of the design and its visual appeal. The steel fire chamber provides fast heating of 42 kilograms of stones. The manufacturer deliberately did not use cast iron, but replaced it with steel 10 millimeters thick. The walls are very thick and do not burn through even after prolonged intensive use. The stove itself is very small and is designed to heat a small room of 12 cubic meters. If desired, a water tank can be installed on the chimney.
- Fast heating
- Compact dimensions
- Thick walls of the firebox
- Lots of detailed reviews online
- Small heated space
See also:
The best wood-burning stoves for a Russian bath
Not a single modern heat source can replace burning wood in terms of aesthetics. This is not only effective in terms of heating, but also beautiful.Modern wood-burning stoves are most often made with glass doors on the firebox so that you can admire the flames consuming the wood. Of course, if you use pressed briquettes, there will be no such attractiveness, but it is cost-effective. The briquette burns longer, but it costs less, and it practically does not produce ash, which will allow you not to clean the stove for many years.
Top 4. Varvara Kamenka
- Average price: 29,200 rubles.
- Country Russia
- Heated volume (cub.m): 24
- Dimensions (D/W/H): 78/56/78 cm
- Construction: floor
- Weight (kg): 85
In most cases, the stove-heater is designed for a small bath room, but if your steam room volume reaches 24 cubic meters, then you will need something more. And now we have just such a stove. She has the largest volume of heated space. At the same time, the dimensions are not to say that large. But there is a very roomy firebox with panoramic glass. It is convenient to lay logs in it, and even large ones. The iron grate around the boiler is designed for laying stones, that is, the furnace is open, but due to the high temperature in the furnace, heating occurs quickly, and it all cools down for quite a long time. This is the best model for a steam room with an above-average volume.
- Holds many stones
- Big firebox
- Designed for large heated volume
- Not the best quality paint
- Rarely found in stores
Top 3. Grill'D Aurora 160 Short
An unusually shaped stove with high efficiency.
- Average price: 20,700 rubles.
- Country Russia
- Heated volume (cu.m.): 16
- Dimensions (D/W/H): 78/46/61 cm
- Construction: floor
- Weight (kg): 40
Russian banya can be both classic and quite modern. If the second is closer to you, then you need to select the appropriate oven. Before us is the most unusual model from a Russian manufacturer. Semicircular design with a figured box for stones. It seems to be the same heater, but it looks very unusual. According to the characteristics, there is also something to look at. The heated volume is 16 cubic meters, which is quite a lot considering the small size of the furnace. About 20 kilograms of stones are placed in the box, but thanks to a complex system of channels, heating occurs very quickly. True, the cooling will not keep you waiting, but there's nothing you can do about it.
- unusual shape
- Compact size
- small firebox
- Fast cooling
Top 2. Vesuvius LEGEND
Completely cast-iron heater, which is not afraid of the highest temperatures. The most reliable and durable design.
- Average price: 43,500 rubles.
- Country Russia
- Heated volume (cubic meters): 18
- Dimensions (D/W/H): 70/56/69 cm
- Construction: floor
- Weight (kg): 90
Cast iron is a derivative of iron. The material is durable and has good thermal conductivity. It retains the accumulated heat for a long time, therefore it is ideal for the production of furnaces. But it has disadvantages, such as high cost, high weight and low aesthetic appeal. It is because of these shortcomings that cast iron is increasingly being replaced by ordinary metal and steel. But there are stoves that are still produced using old technologies. One of them is now in front of us. A true work of blacksmith art. The vat is made of cast iron, so it will never burn out or warp from high temperatures. True, and the price is right.But such a furnace is unlikely to have to be changed even after a dozen years.
- cast iron boiler
- Openwork forged firebox
- High strength
- small ash box
- High price
Top 1. Harvia M2
High-quality closed-type heater with a long service life and easy operation.
- Average price: 24,800 rubles.
- Country: Finland
- Heated volume (cubic meters): 13
- Dimensions (D/W/H): 71/39/43 cm
- Construction: floor
- Weight (kg): 54
Everything is possible in the modern world. Even a Russian sauna with a Finnish heater. Harvia M2 is the best oven in terms of value for money. It is very reliable and will last for many years, which more than compensates for not the lowest price tag. The design is thought out to the smallest detail, although some users have problems with the ash pan. However, this is a matter of habit and does not affect the technical parameters in any way. Otherwise, an excellent iron stove with a wall thickness of up to 8 millimeters. The firebox is equipped with a panoramic door, so you can also enjoy the beauty of an open flame. And the rear exit of the chimney will not interfere with steam, splashing stones.
- Robust construction
- Thoughtful form factor
- Sleek yet stylish design
- Rear chimney outlet
- Not the most convenient ash drawer
- Relatively high price
See also:
The best universal heaters for the Russian bath
Universal stoves can run on both natural gas and wood. All you need to change the type of fuel is to add or remove an injector. This is done in a matter of minutes. In fact, this is the most convenient option to use.If in the bath you just need to wash yourself, without sitting there for long conversations and tea, just put a gas nozzle - and in a couple of tens of minutes the bath is ready. But if gatherings are planned, and the issue of aesthetics comes first, we remove the burner and heat the stove with firewood. Now you can admire the open flame and the indescribable smell of firewood. In this category you will find stoves exclusively from Russian manufacturers.
Top 3. TMF Skoroparka 2012 Inox Lumina
The design of the oven allows easy access to all its internal parts, so there will be no problems with cleaning and maintenance.
- Average price: 24,500 rubles.
- Heated volume (cubic meters): 18
- Dimensions (D/W/H): 92/51/71 cm
- Construction: floor
- Weight (kg): 76
Any heater, especially wood-fired, will require maintenance sooner or later. It is necessary to clean and care for the device so that it works for a long time. Often this is not easy to do, but not in this case. Here, the manufacturer has taken care of the convenience, making the design so that you can easily reach all the internal parts. This is a heater, but of a closed type. However, it can also be used without the top cover. The case is collapsible, dividing into three parts. The firebox is removed separately, and a capacious box is used to receive the ash.
- Easy Maintenance
- Large ash drawer
- Can be used as a closed heater
- Extra large firebox window
- Not the best performance for its size
- Complex manipulations when changing the burner
Top 2. Ermak Uralochka-20
The unique developments of the manufacturer are used in the design of the furnace, increasing its efficiency and overall service life.
- Average price: 24,000 rubles.
- Heated volume (cubic meters): 20
- Dimensions (D/W/H): 75/50/70 cm
- Design: wall
- Weight (kg): 70
The stove-heater is a simple design, and it would seem that there is nothing to add to it. But the Ermak company has seriously improved this equipment, which allowed them to keep their small dimensions, but at the same time increase their efficiency and increase their service life. It uses a complex system of gas exhaust channels. They do not just fly out into the pipe, but also work to warm the room. As a result, the heated area was 20 cubic meters, which is a very good result with such dimensions. However, there are not many stones here. They are laid only on top of the boiler, but this is enough for you to have a real Russian bath, and you can heat it with both wood and gas.
- advanced design
- Very large furnace
- Uses waste gases
- Difficult fuel type change
Top 1. Teplodar Domna
The furnace, designed for heating 25 cubic meters. This is about 20% more than models with similar dimensions.
- Average price: 32,700 rubles.
- Heated volume (cubic meters): 25
- Dimensions (D/W/H): 99/61/70 cm
- Construction: floor
- Weight (kg): 68
A blast furnace is an industrial furnace for melting metals, and it is not for nothing that this heater was given this name. She has the best performance for her size. Yes, the design is rather big, and the stove does not look like a monumental structure, but at the same time it is able to heat 25 cubic meters, and this is a very high figure, quite rare on the market.In addition, the stove is universal, that is, it can work both from a gas nozzle and from a wood fire. True, you won’t be able to enjoy the flames, since there is no glass firebox here. Also note the small ash box. An inconvenient solution, especially considering the large load of the furnace during operation at maximum values.
- The highest performance
- Laconic design
- Large volume of loaded stones
- No glass firebox
- Consumes a lot of fuel
- Tinplate front
See also: