5 best timing belts for Skoda Octavia

The timing belt for a Skoda Octavia is a consumable item that must be replaced sooner or later. We tell you which 5 good models you should pay attention to when buying, and why they deserve your ruble vote.
 
  Name
  Rating
  Nomination
1 Bosch 1 987 949 191 4.75
The highest quality
2 SKF VKMT 01113 4.70
Full set
3 CONTITECH CT 908 4.65
Most versatile
4 DAYCO 94730 4.55
Best price
5 GATES 5489 XS 4.55
Recognized by the people

The timing belt is used in the design of an auto engine to synchronize the rotation of the crankshaft and camshaft. The part is constantly working under heavy loads, so the service life is limited. The manufacturer recommends changing the belt on a Skoda Octavia every 120,000 km. The exact replacement mileage depends on many factors:

  • brand and quality of spare parts;
  • car operating conditions;
  • climate in the driving region;
  • preferred driving style.

If the timing belt is not replaced in time, it is likely to break. Not only do you have to buy a new part, there is also a high risk that the valves in the engine will bend. In the worst case, you will have to send the motor for a major overhaul - this is tens of thousands of rubles.

It is not worth saving on a belt, since cheap analogues have an extremely limited resource, they can burst long before the estimated replacement time. The consequences for the motor will be very sad. To prevent this from happening, take the choice of timing belt with all responsibility.

Top 5. GATES 5489 XS

Rating (2022): 4.55
Recognized by the people

It is easy to find a large number of good reviews about this belt.

  • Average price: 3100 rubles.
  • Number of teeth: 138
  • Weight: 150 g.
  • Country: USA

The English brand has created a timing belt made of HNBR material with the addition of fiberglass. It is a special heat-resistant form of rubber that resists the damaging effects of ozone and harsh chemicals well. The material is not destroyed by the ingress of fuel and lubricants, which are not uncommon in the engine compartment of a car. HNBR also outperforms standard raw materials in terms of strength, wear resistance, elongation at break. A belt made of this material remains operational at temperatures from -25°C to +150°C, which allows it to be used in extreme conditions. Of course, such advantages don't come easy, and the main disadvantage of such a part is the higher price, especially when compared to other competitors. But she's worth her money.

Pros and cons
  • Unique HNBR material
  • Heat resistance up to +150°С
  • Long service life
  • Not afraid of fuel and lubricants
  • High price

Top 4. DAYCO 94730

Rating (2022): 4.55
Accounted for 5 reviews from resources: Yandex Market
Best price

Replacing the timing belt with this model will cost minimal costs

  • Average price: 1700 rubles.
  • Number of teeth: 138
  • Weight: 142 g.
  • Country: USA

It's the turn of the American belt from the popular DAYCO brand. Made from selected raw materials, it has a decent level of strength, wear resistance and chemical ingress, such as fuel or lubricants from the engine.It is worth noting the softness and almost complete noiselessness of the part, even under difficult operating conditions. This makes the model an excellent option primarily for comfortable city driving. The disadvantage of the product is a short service life. Many drivers note that after 60,000 km of run, the belt is completely covered with cracks, and this is the threat of a sudden break. If you plan to buy this product, be prepared to regularly change it strictly at the interval indicated above.

Pros and cons
  • Low noise level in operation
  • Moderate softness and elasticity
  • One of the lowest prices on the market
  • Short service life

Top 3. CONTITECH CT 908

Rating (2022): 4.65
Most versatile

Except for Skoda Octavia suitable for dozens of other cars

  • Average price: 2100 rubles.
  • Number of teeth: 138
  • Weight: 142 g.
  • Country: Germany

Moderately affordable and at the same time reliable timing belt from a German brand - what else is needed to complete your favorite car? The model is fully compatible with Skoda Octavia station wagon and liftback bodies of the first and second generations. Compatibility is also provided with representatives of the Skoda Fabia line in station wagon, sedan and hatchback bodies. It is also noteworthy that this belt can be installed on cars from manufacturers Seat, Audi and Volkswagen. Don't let the low price put you off - the manufacturer has a good reputation and powerful production, which uses selected raw materials. Strict quality control ensures that only reliable belts are sold. The only thing is that these parts are often counterfeited, so you need to make a responsible choice and purchase components from a trusted seller.Otherwise, there is a risk that the timing belt will break right during the ride.

Pros and cons
  • Compatible with dozens of cars
  • Heavy wear resistance
  • Compatible with Skoda Octavia and Fabia
  • Often there are fakes

Top 2. SKF VKMT 01113

Rating (2022): 4.70
Accounted for 5 reviews from resources: Yandex Market
Full set

Usually this belt is sold in a complete timing service kit.

  • Average price: 2900 rubles.
  • Number of teeth: 138
  • Weight: 169g
  • Country: Sweden

A belt from a popular engineering company from Sweden has taken root in Russian cars. The product has a trapezoidal gear profile and 138 teeth, so there are no problems with installing a belt drive in many models from the Skoda Octavia series and other German-made cars (but not all, you need to specify in the product specification). When developing spare parts, the manufacturer tried to ensure the optimal ratio of such characteristics as elasticity and mechanical strength. Thanks to this, the product will certainly not let the driver down for at least the next 120,000 km after installation. We also include here increased wear resistance in comparison with many competitors, which in turn also guarantees a long service life. The only thing that spoils this idyll is the relatively large weight, which can adversely affect the operation of the motor.

Pros and cons
  • Suitable for a wide range of models
  • Often supplied as a timing kit
  • Acceptable elasticity and strength
  • The heaviest weight among competitors

Top 1. Bosch 1 987 949 191

Rating (2022): 4.75
The highest quality

The belt is produced in Germany at a high-tech production

  • Average price: 1800 rubles.
  • Number of teeth: 118
  • Weight: 160 g
  • Country: Germany

The timing belt is straight from Germany, which speaks without further ado about the quality of the products. Compatible with different models of Skoda Octavia, as well as with cars of such popular brands as Volkswagen, Seat and Audi - just a few dozen modifications of different years of production. Moderately elastic, strong enough so that the driver does not have to think too often about replacing the timing belt. The length and width are standard for belts suitable for the Skoda Octavia - 1104 and 23 mm, respectively. You need to understand that quality is only about original Bosch belts. Unfortunately, high popularity is the other side of the championship medal for these consumables, so there is a chance of running into a fake. Be sure to check the quality of the goods before paying for the purchase. If you are lucky with the purchase, you will get a reliable timing belt at a fairly affordable price tag.

Pros and cons
  • High quality belt assembly
  • Tensile and bending strength
  • Long service life
  • Relatively low cost
  • There is a risk of buying a fake
How often do you change the timing belt?
Vote!
Total voted: 4
0 Liked the article?
Attention! The above information is not a buying guide. For any advice, you should contact the experts!

Add a comment

Electronics

Construction

Ratings