12 best boilers for 200 liters

Boiler with copper immersion heater is characterized by easy operation and clear mechanical control. Produced in Slovakia. A convenient toggle switch for manual adjustment of the degree of heating, located in the lower part of the case, allows you to set the desired temperature, which ensures an economical mode of energy consumption. The power of the water heater is 2 kW, however, the first heating of two hundred liters of water takes 7.5 hours. The design of the device is pressure, designed to serve several points of water intake. The body is made of metal, the inner tank is made of stainless steel coated with glass enamel.The device is equipped with light indicators for turning on and heating, a thermometer for monitoring heating.

The protection system consists of a magnesium anode against corrosion, a non-return valve, overheating sensors and an automatic shutdown. The water heater can be installed in unheated rooms, as the boiler has a frost protection function. Protection against scale and rust is provided by the enamelled coating of the tank and the magnesium anode.

The name of the model of the 200-liter floor boiler contains the word "Champion" for a reason, user and technical characteristics correspond to this title. In addition to a capacious tank, the water heater is equipped with a powerful heating element of 6 kW, which heats the entire volume to the maximum temperature in 2 hours. The pressure device of the boiler allows you to comfortably use hot water at 3-4 points, and thanks to recirculation, the temperature of the liquid in the system always remains within the specified limits. The boiler has 3 heating modes, which are regulated by a mechanical switch. This makes it possible to reduce the power consumption of the unit, which can be powered from the mains at 220 V, and, if necessary, connected to 380 V.

The main types of protection for the water heater are standard - an overpressure safety valve, a sensor and a relay that turn off the boiler when the maximum temperature is reached, which protects the electrical device from overheating. Anti-corrosion protection is provided by coating the internal surfaces of the tank with glass ceramics, as well as a magnesium anode.

This model belongs to the available series. A 200-liter wall-mounted storage water heater is suitable for servicing several plumbing points. The budget class of the boiler is expressed in a low level of energy consumption - a copper heating element has a power of 1.8 kW. This is enough to heat a large amount of water, but the initial heating of 200 liters to 70°C can take more than 8 hours. The manufacturer took care of maintaining the water temperature for a long period, the water does not cool for more than a day thanks to an effective insulation made of 28 mm polyurethane foam.

The water heater protection system includes a safety regulator, overheating sensors and relays, protection against freezing and splashing.Inside the tank, the surface is coated with a high-quality enamel composition, corrosion protection is reinforced with an enlarged magnesium anode.

A pressure storage electric boiler is suitable for a country house, cafe, barbershop or a small fitness club. The water heater is designed for several points of water intake. A 3 kW heating element provides fast heating and maintenance of water temperature. The boiler has an economical mode, in which the water warms up to 55 ° C, then the heating is automatically turned off. This allows you to increase the operating life of the heating device, significantly saves energy costs, increases the efficiency of the water heater.

The boiler uses an RCD protection system that protects users from electric shock, short circuits and fires. The Protect Tank anti-corrosion system used in the unit is a magnesium anode with an increased mass and a finely dispersed enamel coating applied by powder. Such protection protects the internal tank and the heating element from the appearance of sedimentation, scale, rust, which in turn affects the quality of the water supplied.Thermal insulation 55 mm, frost protection of the drainage system, safety valve complete the functionality of the water heater.

An indirect storage type water heater is a pressure boiler and is capable of providing hot water to one or more plumbing fixtures. The boiler has 1 heat exchanger of the “coil” type with a capacity of 32 kW, while it is additionally possible to install an electric heating element of 2 or 3 kW, which will increase the heating rate. Water heating can be carried out from any boiler, it is also possible to use solar collectors. The temperature is controlled by a contact thermostat and an overheating sensor. When the maximum heating temperature is reached, the boiler switches off automatically.On the case there is an indication of inclusion and heating.

The model has a recirculation pipe. The use of DHW recirculation ensures that the temperature in the analysis system is maintained and hot water is instantly supplied when the tap is opened. Due to the protection against high pressure, the operation of the boiler is safe. Users note the ease of installation and connection, cost-effectiveness and ergonomics of the device.

The reliable water heater differs in stable work. In an oval-shaped steel case, there is 1 heat exchanger in the form of a large coil, with a capacity of 36 kW. The outer surface of the coolant has an area of ​​1 sq.m, the device is located vertically to the very bottom. This ensures fast and uniform heating of water with a volume of 200 liters to 95 ° C. The heat exchanger and tank are covered with Ceraprotect enamel to protect against scale and rust, and an anti-corrosion anode is additionally installed. The boiler has a reduced heat loss coefficient due to a 50 mm thick polyurethane foam insulation.

The manufacturer has provided for the parallel connection of several water heaters if it is necessary to increase the volume of water treatment. Users note that the mechanical control is quite simple and straightforward.The installation instructions for the water heater are informative - it is easy to install and connect the boiler. They also note the impressive weight of the heating device and the need to choose a place for installation, since the side connection requires additional space.

A water heater from the Czech Republic is one of the most powerful boilers in our rating. Productive unit in a metal case of vertical installation with top connection. Heating of a large volume of water is carried out using two heat carriers, the maximum power of which is 48 kW, and the total area is 2 sq.m. This filling allows you to heat water in the shortest possible time up to 90 ° C.

When operating the boiler, you can use a combined water supply, it is possible to connect a recirculation line. The inner tank of the water heater is made of stainless steel. The surface of the heat carriers and the tank is covered with protective enamel, an anti-corrosion anode is installed, which prevents the appearance of rust. The model has several devices for safe operation: protection against overheating and water of the 4th degree, a safety valve against overpressure. User reviews note ease of connection, convenient top connection, and a clear control system.However, for installation, you need to use at least two people - the weight of the water heater without water is 108 kg.

The German quality boiler is designed for the hygienic preparation of hot water of the highest quality. The water heater tank and heat exchanger with a capacity of 31 kW are covered with protective glass enamel, which does not allow water to become contaminated, prevents scale, turbidity and rust. The area of ​​the heat exchanger is 0.95 sq.m, the smooth-tube coil is located in the lower half of the tank. This allows the water to heat up quickly, and the 45 mm thick polyurethane foam insulation maintains the temperature for a long time. The magnesium anode provides protection against corrosion of the tank.

An additional heating element can be installed in the boiler, it is possible to connect a finned type heat exchanger. A recirculation pipe is provided. For mechanical cleaning of the tank, the body is equipped with an inspection hole. The device is controlled mechanically, there is a temperature controller, protection against overpressure, overheating.In user reviews, the stylish design of the case, the successful silver color, the convenient location of the thermometer are especially noted, and the high quality of water is also highlighted when the water heater is connected to drinking water supply.

A water heater manufactured in Germany is suitable for providing hot water to private houses, large apartments, including those located on two levels, catering points. Heating can be carried out both from the main line and liquefied gas. Installation in a closed, pressure-resistant system is recommended.The boiler is equipped with an injection gas burner with ceramic rods that remove heat, as well as an open combustion chamber, which is surrounded by water - this reduces heat loss from radiation. The required diameter of the chimney for connection is 90 mm. No separate room is required to install the boiler.

The peculiarity of the water heater is that it can be used in conjunction with a gas boiler to provide heating to the room and organize the simultaneous supply of hot water. Operational safety is ensured by a multi-level control and protection system: the manufacturer has provided sensors for the release of combustion products into the room, a maximum heat limiter, flame control, and overpressure protection. Users note ease of installation and good performance.

The Italian brand manufactures water heating equipment in factories in China. Baxi SAG2 195 gas storage boiler is an excellent model for autonomous hot water supply with connection to main gas. The 195 liter stainless steel tank is coated inside with a protective titanium enamel and equipped with a magnesium anode, which protects the inner surface from corrosion. Type of combustion chamber - open.It is safe to use the water heater due to the installed draft sensor, which is responsible for the removal of combustion products. In the event of a lack of draft due to a blockage in the chimney or strong wind, the thermostat automatically turns off the gas supply. The thermocouple monitors the burning of the flame and also turns off the fuel supply if the burner or igniter goes out.

It is possible to switch the water heater to work on liquefied gas. In any operating mode, the boiler maintains the set water temperature, the heating stability does not depend on the inlet water temperature and flow rate. The safety valve is designed for a pressure of 8 bar, although the heater can work stably at low pressure and low water flow.

The American-made Bradford White M-I-504S6FBN floor storage gas water heater is a reliable and efficient boiler that can provide hot water to both residential premises and a commercial enterprise. For the operation of an electrically independent device, it is necessary to connect to the main gas and chimney.The boiler has a steel inner tank, covered with a special glass-ceramic composition, which ensures high water quality and prevents the appearance of scale, a magnesium anode is installed inside, which protects the inner surfaces of the tank from rusting. The water heater has an open combustion chamber, a gas burner with reduced NOx emissions.

The patented self-cleaning technology of the Hydrojet provides eddy currents in a special tube that prevents the formation of scale on the walls of the inner tank. The water heater has a metal case, lateral eyeliner. A viewing window is provided on the body for visual control of the flame in the burner. Traction sensors, combustion sensors, a 10 bar safety valve are responsible for the safety of use.

The Italian brand is widely known for water heaters in different categories. A 200 liter gas boiler from Ariston is able to provide hot water to 3-4 points of hot water use. The water heater is installed on the floor, piping from above. The control is mechanical, there are indications of turning on and heating, but there is no thermometer on the case.The protective system includes gas control, a safety valve, draft and flame sensors. Reliable SIT automation controls the gas supply in case of flame failure in the burner and blocks re-ignition. Piezo ignition does not require an electrical connection.

According to customer reviews, a water heater can last 10-13 years without breakdowns. Such durability is provided by a protective coating of the inner tank and a magnesium anode - titanium enamel prevents corrosion, scale formation, the anode enhances protection. Users note that the water heater keeps the water temperature up to two days thanks to 50 mm thick polyurethane foam insulation.