15 best heat guns

The Elitech TP 2EM electric heat gun opens the top three. Low power, it is intended for use exclusively in small living quarters or garages. This is due to the fact that during intensive work the heat gun practically does not make noise. The long warming up of a stainless steel heating element is compensated by a quite acceptable level of air exchange - about 260 cubic meters per hour.

To protect against overheating, a special thermostat is installed under the body of the device, which automatically turns off the gun when a critical temperature is reached.It is worth saying that the assembly itself was excellent - users note the high operational capabilities of the installation even after three to five years of use. And the price is available to a wide range of consumers.

Advantages:

• excellent build quality;
• compactness and good performance;
• during operation, there is practically no noise;
• several control modes;
• the presence of protectors from overheating;
• low cost.

Flaws:

• low heating power - not suitable for large rooms.

On the second line of the rating is the brainchild of the Scandinavian company Timberk, an electric heat gun model TIH R5 3M ECO. From season to season, this line pleases customers with new, even more advanced models of thermal installations, and our contender is no exception. In general, the gun looks very dignified, which was largely due to some structural changes.

To protect the housing from corrosion and increase resistance to contact with rough surfaces, a special fine spraying was applied. As for the technical characteristics, here it should be noted the maximum value of air exchange, equal to 300 cubic meters per hour, and the optimal level of noise emitted during intensive work at a maximum power of 3 kW.This heat gun is ideal for heating rooms up to 30 square meters in size.

Advantages:

• low cost;
• excellent build quality;
• the presence of rubberized pads on the leg of the heat gun;
• high performance;
• the presence of a thermostat;
• the ability to work in fan mode.

Flaws:

• not detected.

Despite the abundance of models on the market of heat guns that can effectively heat rooms up to 45-50 square meters, the choice of users fell on Interskol TPE-5 - an installation that ranks first in the rating and deservedly receives the title of best. Several heating elements made in the form of fichral spirals provide heating power up to 4.5 kW. Together with the parameters of the fan, the total volume of driven air is almost 400 cubic meters per hour. Warming up of the room begins very quickly, since the heating of the thermoelements of the heat gun to the operating temperature occurs in a matter of minutes.

Advantages:

• optimal cost;
• operational heating of the room;
• the double-sided casing provided for by the design prevents the installation from rapid overheating;
• the presence of a shutdown function in case of overheating;
• the possibility of vertical adjustment of the body position;
• fan mode.

Flaws:

• not detected.

Despite the general skepticism about devices of this caliber made in China, Ballu has gained considerable popularity around the world. In many ways, this success was facilitated by the production of heat guns, including the gas-fired thermal unit BALLU BHG-10, which took third place in our rating. This is a typical industrial model designed to heat a room of about 100 square meters. It differs from other contenders by the minimum consumption of gaseous fuel - 0.7 kilograms per hour with a maximum heating power of 10 kW. Only propane can be used as fuel here, which can be regarded as a minor drawback. However, in general, users are satisfied with the heat gun, and note stable operation throughout the entire operational period.

Advantages:

• optimal fuel consumption;
• attractive price;
• heating area (about 100 m²);
• mechanical control.

Flaws:

• inability to use alternative sources of gaseous fuels with the exception of propane.

One step away from the leading position, the BLP 17 M gas gun model from the Italian company Master stopped. The main difference between this unit and others included in the top three is the output thermal power, which is 16 kW with the possibility of a smooth decrease to 10 kW. The thermal plant uses propane and butane as fuel, the consumption of which fluctuates around 1.16 kilograms per hour.

Theoretically, such a gun can heat industrial premises up to 110-120 square meters - this is where its effectiveness will fully manifest itself. Judging by the reviews of the owners, the installation is economical, reliable and accurate assembly, and also has a balanced cost. When using a heat gun to maintain a comfortable temperature in garages and repair boxes (rooms where you often have to open the entrance gate), the Master BLP 17 M does an excellent job of heating about 300 m³ per hour.

The first place rightfully goes to the next representative of the Interskol company - the model of the gas heat gun Interskol TPG-10. It cannot be said that purely technically it surpasses all its competitors, however, in terms of reliability and protection, not a single presented model can compare with it. Possessing the potential for operational heating of 100 square meters of space, the gun produces up to 30 kW of thermal power. As security systems, it provides an auto-shutdown function, overheating protection and improved thermal insulation of the case.

Summing up, I would like to note that Interskol TPG-10 is a typical industrial model of a heat gun with good technical and tread parameters, inexpensive and extremely easy to use. The last two characteristics are most highly valued by owners. The presence of piezo ignition and a fairly low fuel consumption (0.76 l / h) in many reviews are also considered the indisputable advantages of this model.

The third place given to the BALLU BHDP-20 diesel heat gun should not be misleading. Compared to other contenders for the highest place, it is less productive, but in terms of price and quality it is not inferior to them. The heating capacity of this heat gun is 20 kW, which is enough to serve an industrial premises up to 200 square meters. Fuel consumption does not exceed 1.6 kilograms per hour. For the sake of compactness and ease of movement of the gun, the manufacturer significantly reduced the volume of the fuel tank to 12 liters.As a result: we get an advantage on the one hand and a disadvantage on the other. But in general, the model causes exceptionally pleasant feelings.

Advantages:

• compactness;
• low weight of the structure;
• heating power is 20 kW;
• optimal price.

Flaws:

• small fuel tank.

The second place in the rating, among other equals, goes to the Italian diesel heat gun MASTER B 100 CED. The choice of the middle representative of the lineup is dictated by the balance between performance, mobility and overall cost. It is not known for certain what the maximum heated area is, however, the thermal power of the gun reaches nearly 29 kW. Fuel consumption per hour of operation is 2.3 kilograms with a total tank capacity of 44 liters. In terms of mobility, everything is as follows: the main structure, whose mass is 25 kilograms, is arranged on a mobile cart equipped with handles and a pair of wheels, and therefore the movement does not require large physical costs. As for the cost, it fully corresponds to all the parameters of the heat gun.

Advantages:

• high quality installation;
• the presence of a transport trolley;
• high thermal power (29 kW);
• mobility;
• tank volume (44 liters).

Flaws:

• a thermostat is included as an optional extra that you have to pay for.

The leader of our rating in the category of diesel heat guns was a high-performance unit - ELITECH TP ​​120DP.This "monster" is able to qualitatively heat a large area of ​​​​premises (up to 800 m²) with a large volume. Working in peak mode, the device is capable of generating up to 120 kW of thermal power. The mechanical gun control system has an intuitive and so simple interface that even an inexperienced user can independently figure out what's what.

Far from small dimensions determine the impressive weight of the device - 74 kilograms. The manufacturer supplied the heat gun with a number of systems that ensure safe operation - an overheating sensor, a thermostat and protection of the electrical part from power surges. The owners in their reviews speak positively about the capabilities of the unit: this is the mobility of the heat gun, and an impressive 110-liter fuel tank. The intensity of air exchange is also highly appreciated - in an hour of operation, the gun is capable of heating 2124 cubic meters of air.

An excellent solution for garages, repair shops or small storage facilities. The thermal unit burns used engine oil and has a fairly high efficiency - its efficiency is 88%. For ease of use, the entire electrical part is made in a separate unit and contains a microprocessor control and safety system.

The owners really like the efficiency of the heat gun - the consumption is no more than 2.1 l / h at maximum power. According to the most conservative estimates, the cost of such heating is more than twice as economical as wood-fired systems. In addition, the reviews note the reliability of the equipment, ease of operation and its durability. The characteristics listed above are confirmed by the manufacturer's warranty obligations during the first year of operation.

The use of timber and wood processing products in a modern high-performance unit can not only provide high economic benefits, but also make it possible to profitably dispose of waste from the main activity without any costs. The manufacturer also allows the use of low-calorie coal as fuel.

The heat gun has a rather impressive weight - 800 kg and is able to heat a strand of 500 m². The electrical part of the equipment consists of a fan with a capacity of 3400 m³. In general, the heat gun is characterized by high performance, reliability and durability (at least 20 years). Owners who use PROMA-100 for heating garage boxes and warehouses leave only positive feedback about the operation of this installation.

The heat gun runs on waste oil and can provide heat to rooms up to 650 m². Such a unit is most appropriate for warehouses and hangars, garage boxes and workshops. The consumption of "working off" is no more than 3 l / h (at maximum power).The manufacturer has provided a whole set of protective functions and made the operation of the heat gun as safe as possible.

The owners who have chosen this particular model for their needs are more than satisfied with the result. The unit has a high efficiency, and it can work on almost all types of motor, hydraulic and transmission oils. The reviews also positively note the robust housing, the electronic fuel supply and adjustment system, the safety and cleanliness of combustion - the exhaust gases are evacuated to the outside using the exhaust channel and do not come into contact with the heated air inside the room.

The heat gun of the Swedish manufacturer has advanced control options. The built-in SIR system can regulate the air flow rate, set the desired air temperature, control several heaters at the same time and program the work algorithms for the week ahead.

Owners highly appreciate the characteristics and convenient operation of the heat gun working with a liquid heat carrier.The quietest electric fan makes the operation of the unit almost imperceptible, and the possibility of wall or ceiling mounting allows you to seamlessly integrate the equipment in rooms with any design solutions. In the reviews of the owners, the high quality of the components (the manufacturer's warranty is given for three years) and the laconic design are especially noted. But the high cost (despite its validity) does not satisfy everyone.

The domestic manufacturer produces a fairly competitive model of the Kalashnikov KVF-W21-12 heat gun, which works with a water coolant. Its power is a little less than 20 kW, and the length of the air flow reaches 18 meters. The products are of high quality, which can not be doubted by the manufacturer's warranty, which is valid for three years.

The owners appreciated this heat gun, which, moreover, can be controlled via a remote control. The reviews positively assess the possibility of wall mounting with an angle of inclination (up to 15 °), which makes it possible to effectively use these devices in gyms, showrooms and other spacious rooms. The direction of the warm air jet can be additionally regulated with the help of blinds, and the intensity of the flow can be adjusted by switching the fan speeds.

The German manufacturer Zilon boasts a highly efficient heat gun.Its maximum power can be 70 kW (the inlet water temperature must be at the level of 90 °C). At the same time, the air is heated at 45 ° C, and the length of the thermal jet reaches 25 meters. The fan of only one unit is capable of driving 5.5 thousand m³ through the heat exchanger in an hour of operation and heating a fairly large room.

Judging by the reviews of the owners, the Zilon HP-80 gun is highly economical, has a waterproof housing, which allows them to be used not only for heating industrial premises, but also in car washes or in swimming pools. The lowest power consumption, compact dimensions and attractive appearance - these characteristics of the device have earned high marks from consumers. In addition, the presence of overheating protection, a long service life and a manufacturer's warranty (24 months) have become a weighty argument for the Zilon HP-80 heat gun to become a leader in its category.