15 best putties

The best starter putties

A distinctive feature of starting putties is an affordable price. There are different types of compositions, some can only be used inside buildings, while others can be used in the most difficult atmospheric conditions.

5 GLIMS Styro Prime

GLIMS Styro Prime Starting Putty is specially designed to level and strengthen the surface before applying a decorative coating. This elastic mixture forms the most durable layer, preventing moisture from entering, breaking or cracking. The presented product is characterized by better performance and increased resistance to water, steam and the lowest temperatures down to -50 °C. Thanks to this, GLIMS Styro Prime has a wide range of applications. With its help, you can putty insulation, pool, walls, facade, etc.

The recommended proportions of preparation require a volume of water of 330 ml per 1 kg of the mixture. With a layer thickness of 2 mm, the consumption of GLIMS Styro Prime will be 3 kg per 1 m². The putty is very easy to use, demonstrates better adhesion to the base and easy distribution with a spatula. Among other things, this building mixture complies with all environmental standards and is safe for residential premises.

4 Bergauf Glatte Zement

Base putty Bergauf Glatte Zement will be the best choice if you need to carry out a rough preparation of walls and ceilings before the next stage of repair work. This building mixture, which is based on cement, is characterized by good plasticity and increased resistance to cracking. The use of this putty is justified both indoors and in the facade decoration of buildings, since it is intended for objects with normal and high levels of moisture. In addition, the presented solution is designed for operation in a wide temperature range from -50 °C to 70 °C.

Bergauf Glatte Zement starter putty is intended for manual application only, with a maximum allowable layer thickness of 0.5 to 15 mm. Suitable for almost any surface on which it is planned to apply decorative plaster, wallpaper, finishing putty or painting. To obtain the correct consistency, this mixture must be diluted with 8.2-9.2 liters of water, the temperature of which should be between 5 and 25 ° C. At the same time, the approximate consumption of putty is 1 kg per square meter.

3 Volma Standard

Base putty Volma Standard is widely used in construction. The material is used when leveling walls and ceilings in dry rooms. Puttying is recommended for concrete and gypsum-containing substrates. After applying a layer of putty, you can start painting, wallpapering or decorating the surface. The mixture is prepared on the basis of gypsum binder and mineral additives. The composition has high adhesion and resistance to cracking.The advantages of the product include the presence of thermal insulation qualities, manufacturability of use.

Experienced craftsmen and novice finishers highlight several positive properties of Volma Standard starting putty. This is versatility, ease of preparation and application, plasticity, ease of grinding. Of the minuses, consumers note the speed of setting and the lack of color coding.

2 Founding Ecosilk

The best domestic starting putty is a mixture of Osnovit Ekonsilk. It is intended for leveling walls and ceilings, for eliminating cracks and sealing joints in plasterboard structures. The basis of putty is high-quality white gypsum. It contains special chemicals. They give the putty plasticity, non-shrinkage, good adhesion. In addition, the material is characterized by low consumption (0.8 ... 0.9 kg / sq. M) with a layer thickness of 1 mm. You can putty bases made of brick, concrete, gas blocks. After drying, a durable coating with high plasticity is formed. The composition is easy to prepare, quickly applied with a spatula, well smoothed.

Domestic builders note the good quality of the starting putty Found Ekonsilk, availability, low material consumption. Among the shortcomings, experts distinguish the appearance of cracks after complete drying.

1 Rusean TT

Rusean TT dry mortar is used as a base putty and guarantees a perfectly even surface due to its excellent plasticity. Since it has the best qualities of moisture resistance, vapor permeability and adhesion, it can be used both for facade work and indoors.It is perfect for basements, bathrooms, porches, etc. This putty can be used to prepare walls and ceilings for applying paint or wallpaper, as well as for repairing cracks and electrical wiring. The presented mixture can be laid in several layers after the previous one has completely dried, while the thickness of each layer should not exceed 5 mm.

For the best result of the repair work with the starting putty Rusean TT, you should strictly adhere to the manufacturer's recommendations regarding the proportions and mixing time. If you putty the walls with a mortar 1 mm thick, then the estimated consumption of the mortar will be 1.1 kg per square meter.

The best finishing putties

When painting walls and ceilings, the slightest defects in the base are clearly visible. Thanks to the finishing putty, it is possible to perfectly prepare the surface for painting or wallpapering.

5 Knauf Multi-Finish

Putty KNAUF Multi-Finish uses gypsum as a base component, in which polymer components and reinforcing fiber are added to obtain high performance characteristics of the material. This solution makes the mixture the best choice for the perfect treatment of various surfaces before applying paint or wallpapering. Since the presented mixture is characterized by better plasticity, it is very convenient to apply and guarantees a smooth and even surface without transitions. Putty KNAUF Multi-Finish can be used for sealing gaps and joints of structures, while the maximum layer thickness is allowed no more than 5 mm.It can also be used for continuous leveling up to 3 mm, both untreated uneven surfaces and finished plasterboard structures or concrete slabs.

Finishing putty KNAUF Multi-Finish shows the best drying speed. Depending on the thickness of the layer, as well as the ambient temperature and ventilation, this process takes from 1 to 3 days. Subject to all requirements for surface preparation and proportions of dilution of the dry mixture, the best result is guaranteed.

4 Ceresit CT 225

Finishing cement putty Ceresit CT 225 is able to eliminate small errors on the ceiling and walls inside buildings, as well as for work on the facade of buildings. At the same time, it will be effective for hiding cracks, chips and other irregularities on the treated surface, the depth of which does not exceed 3 mm. This putty has better adhesion to almost all mineral bases, which ensures the creation of a high-quality and reliable layer.

Reinforcing fibers, which are included in the composition of the dry mixture, are responsible for the strength and durability of the coating. Of great importance is the method of preparing Ceresit CT 225 for work. The required amount of water must fully comply with the manufacturer's requirements. You should also observe the time intervals when mixing, as indicated in the instructions. Subject to all recommendations, it will be much easier to putty walls or ceilings with this mixture than with solutions from other manufacturers.

3 Prospectors finishing

At the most affordable price, you can purchase the finishing putty of the domestic manufacturer Prospectors. Despite the budget, the material is of high quality. This was achieved by introducing modifying additives into the gypsum base. Putty is recommended for preparing ceilings and walls in interior spaces, including those with a high level of humidity. It is possible to putty various types of bases, for example, plastered surfaces, concrete, bricks. After complete drying (24 hours), a layer of paint or wallpaper can be applied to the surface. It is not allowed to finish surfaces that come into contact with food and drinking water.

The best qualities of putty Prospectors finishing consumers consider low price, plasticity, non-shrinkage, fast hardening. The disadvantages of the mixture are poor mixing and low strength of the dried layer.

2 Weber LR+

To prepare the surface for decorative processing, Weber LR + finishing putty is intended. It is produced in the form of a dry mix. The working solution is prepared by mixing the building powder with water. In one operation, it is allowed to apply a layer with a thickness of 1-5 mm. The prepared solution retains its working properties for 48 hours. The material is characterized by high plasticity due to the introduction of binder components of organic origin into the composition. Putty can be applied both manually and mechanically. The mixture is intended for the preparation of bases in heated rooms for painting or wallpaper.

Russian finishers note such advantages of putty as quick mixing of layers, simple sanding and obtaining a perfectly white smooth layer. Unfortunately, this finishing material is not available everywhere, and its price is quite high.

1 Sheetrock SuperFinish

Sheetrock SuperFinish ready-to-use putty has unique qualities. The manufacturer mixed all the components in the optimal combination, so the finisher just needs to mix the working solution before work and start applying. It was possible to achieve special properties by adding vinyl compounds to the composition. The applied layer dries within 5 hours. It is recommended to carry out further operations after 24 hours. The material has low shrinkage, which has a positive effect on the quality of the finish. Putty is easy to apply, it has perfect adhesion. The thickness of one layer should be about 2 mm. On the putty surface, you can apply paint or glue wallpaper.

Master finishers call Sheetrock SuperFinish the best composition for perfect surface preparation for painting or wallpaper. The only disadvantage of the mixture is the high price.

The best universal putties

In some cases, it is more convenient and more profitable to level ceilings, walls and facades with the help of universal putty. Certain types are suitable for leveling a wide range of materials.

5 Litokol Litofinish Facade

Universal material for puttying walls and ceilings, excellent for interior and exterior preparatory work. Works well on any brick or concrete base. The exception is walls made of gas silicate blocks and foam concrete - the use of this putty with them is not recommended by the manufacturer. The cement base determines the maximum layer thickness - 2 mm, however, after drying, the next one can be applied until the desired result is achieved.

Surfaces should be puttied at positive temperatures, and after drying, the resulting layer has frost-resistant properties. Litokol Litofinish Fasad proved to be excellent in harsh climatic conditions. On average, putty consumption is 1.4 kg/m² per 1 mm layer, which is quite economical compared to the closest competitors.

4 white house

Universal putty White House based on acrylic copolymer, suitable for leveling exterior and interior walls. In this case, the layer thickness can reach up to 7 mm, which is an excellent indicator for the finished mixture. After application, the mixture completely hardens in two hours, reaching its complete drying after a day. The resulting homogeneous coating has a snow-white matte tint and is not taken at all.

White House putty is highly resistant to weather and frost. Given the moisture-resistant features of this mixture, it can be safely used for treating walls in rooms with high humidity, such as a basement, a bathhouse, a kitchen, etc. It is also absolutely harmless to the environment, humans, and has absolutely no smell.The cost of this finishing material is fully justified by the quality and characteristics of the mixture, as well as strength, which ensures resistance to external factors.

3 Unis Bleek

The best option for a budget finish would be the use of Unis Blik putty. This composition is made on the basis of natural building materials. The manufacturer recommends using the mixture to seal small defects and cracks on various surfaces. The plastic mass can be used for mounting bathtubs, sinks, toilet bowls, etc. The main field of application of putty is the decoration of rooms with a favorable microclimate. The composition is not suitable for creating coatings in wet rooms and on the facade of buildings. To apply a large putty layer, it is necessary to use a reinforcing tape. When drying, the leveling layer does not shrink.

Master finishers consider Unis Blik putty to be the best budget option for interior decoration. It is plastic, crack-resistant and quick-drying. But when dried, shedding may occur due to the presence of small pebbles in the composition.

2 VGT acrylic universal

It is very convenient for builders to create perfectly flat surfaces using VGT universal putty. Acrylic based product can be used to seal cracks in plaster, wood, concrete, brick, fiberboard and chipboard. Putty is recommended to be used inside and outside buildings, only the base must be protected from direct exposure to precipitation. The thickness of one layer can vary in the range of 1-7 mm.After drying, a matte smooth coating is formed; with skillful use, the composition can act as a finishing treatment. Putty is characterized by low shrinkage and good adhesion to different materials.

Finishers love the many qualities of VGT Acrylic All-Purpose Putty. It is convenient to apply and level, it has moisture resistance and frost resistance. The disadvantages of the material include the formation of fine caustic dust during operation, quick drying in a container with an open lid.

1 Knauf Fugen

The KNAUF Fugen universal putty finds wide application. It is made on the basis of gypsum powder with the addition of polymer additives. Additives increase the elasticity of the putty layer, improve the adhesive ability. The main purpose of the mixture is to level walls and ceilings inside buildings where there is a normal level of humidity. Since gypsum is hygroscopic, it is not recommended to putty bases in bathrooms and kitchens. There are no toxic compounds in the composition; after drying, the coating does not crack due to the lack of shrinkage. With the help of putty, you can level plastered and concrete surfaces, seal seams in plasterboard structures, and also eliminate minor defects and cracks.

Professional builders speak positively about such qualities of KNAUF Fugen putty as versatility, plasticity, good adhesion. But the solution quickly hardens, and it cannot be re-diluted with water.

+2 Liked the article?

Recommended

10 best self-leveling floors

10 best floor ties

10 best mounting foams

10 best facade plasters

10 best professional hair masks

Top 5 fish food manufacturers

15 best car paints

10 best baits for bream

15 Best Concrete Mixers