10 best facade plasters

Even ordinary cement plaster can have a decorative effect. The Kreps company produces a mixture with a bark beetle texture pattern, while it does not contain acrylates and silicone polymers. Only cement and lime with a small addition of marble to enhance the layer and external beauty.

The frost resistance index here is 75 units, which is, if not the best, but a very attractive result. Particular attention should be paid to the consumption of the mixture. It is 2.5 kilograms per square meter when applied in a centimeter layer. This is a lot, and this factor is the main drawback of the product. However, the price is not the lowest. Of course, when taking into account the texture component and the presence of marble in the composition, it is leveled, but this product still cannot be classified as a decorative mixture. But with the help of plaster, you can significantly save on the second layer of decoration. Ideal for a budget renovation or non-residential building.

In the market of building materials, their leaders have long been determined. They produce the best blends and boast a huge amount of positive feedback. You can compete with them only by a combination of an attractive price and high quality, and apparently, CenterPro has succeeded in this. Before us is not just plaster, but a full-fledged waterproofing. It easily withstands even prolonged contact with water, and slight moisture is generally invisible to it.

Cement mixture with the addition of silicone copolymers. It has the best adhesion to any mineral surfaces, and can also be used as an adhesive for laying bricks or installing insulation boards. Unlike conventional cement mixtures, this plaster is applied in a thin layer of no more than 5 millimeters. This completely eliminates the price, which at first glance may seem extremely high. If your home does not require maximum waterproofing, then you simply do not need this product, hence this not the most honorable place in the ranking.

Plaster not only decorates the facade, but also enhances it. Before us is a mixture with reinforcement, and there is no advertising exaggeration. To create the desired effect, the so-called alkaline mesh is used, which reinforces the layer after drying. Its density is not lower than 145 grams per square meter, which is the highest among similar mixtures.

At the height and other aspects, such as frost resistance, established at around 50 units, or vapor permeability. With such a finish, your facade will become not only strong, but also warm and breathable. Only the decorative appeal leaves much to be desired.Plaster is not designed for decorating the facade. On top of it, you will have to apply another layer, but on the other hand, the requirements for it will be much lower, which will significantly save on the most expensive, final stage of finishing.

External finishing is a process consisting of several stages. For example, plastering a basement is different from facade work and other materials are required. Of course, no one will forbid using the same mixture on the base as on the walls, but there are special products for it, one of which is now in front of us. This is a silicone plaster with coarse-grained granite filler. Acrylic and silicone resins give better adhesion to mineral surfaces and excellent vapor permeability with heat retention capability.

Granite added to the composition works both for decorative appeal and for quality aspects. This is the most durable material, which is not afraid of any impact, whether it be natural factors or mechanical damage. In addition, it looks the most attractive. Plaster does not require tinting. The coating has a natural color and texture of the stone. True, such a pleasure is relatively expensive, but the brand is also popular, awarded with a lot of positive reviews.

According to many professional builders and finishers, the Russian company Perel produces the best plaster mixtures, both dry and ready-to-use.In this case, we have a plaster based on silicone copolymers with the addition of acrylates and natural marble chips as a filler. The best option for finishing the facade, both from the technical side and from the decorative side.

Silicones and acrylates have the highest vapor permeability and perfect adhesion to most surfaces. Plaster can be used both on a mineral basis and on a synthetic one, for example, on polystyrene foam. The composition of the mixture is completely free of ammonia and harmful formaldehydes. It can also be used indoors if needed. The color is neutral, tinted at your discretion, and natural marble makes the coating attractive. It is natural, not its synthetic substitute.

Before us is a mixture intended not only for finishing facades, but also for gluing building materials, for example, aerated concrete blocks. The product is universal, which makes it as attractive as possible for the buyer. Plus, no matter how it's used, the end result is simply the best.

We consider this product from the side of plaster, therefore, such characteristics as frost resistance of 75 units, high vapor permeability and resistance to mechanical damage are of particular attraction for us. We are not talking about the decorative component here. The mixture is cement, that is, with minimal attractiveness. But the highest quality and reliably protecting your home from any adversity, both natural and purely mechanical. But the price tag is attributed to the disadvantages.Among these products there are more democratic proposals with the same characteristics and properties.

Modern building materials, being predominantly synthetic, strive for maximum identity with natural ones. But, the best product still remains the natural one, and in this case you get real marble, not its fake. This plaster is filled with natural marble chips. This is not only attractive, but also relevant from the technical side.

The coating layer is very durable and reliable. He is not afraid of mechanical damage, and the finish will not notice the natural adversities at all. The mixture is based on acrylic resin. Completely colorless. The entire external component lay on the marble, while the resins act as an adhesive material with high vapor permeability and additional thermal insulation. Of course, it is difficult to judge the insulating qualities of a decorative mortar, since it is applied in a very thin layer of only a few millimeters. Due to this, the consumption per meter does not exceed three kilograms.

External finishing should be not only reliable, but also attractive. This mixture is intended specifically for decorating the surface, so you should not discard it after meeting the price tag. Unlike draft mixtures, decorative ones are applied in an extremely thin layer. They are not faced with the task of protecting the facade from natural or mechanical influences, but after application they create an attractive coating.In this case, reminiscent of an orange peel.

The plaster has excellent adhesion to almost any surface, including wood, that is, it can also be used indoors. It shows the best adhesion with cement surfaces and masonry. The consumption of material per square meter is from 2 to 3 kilograms, that is, one can is enough to finish the facade with an area of ​​​​approximately 7 m².

Exterior decoration is carried out not only for aesthetic purposes, but also for purely applied purposes. For example, plaster can significantly increase the thermal insulation of a building, reducing heating costs. Often mentions of this are a banal publicity stunt, but not in the case of Perel, a Russian company that has earned its positive reputation not with empty promises, but with the release of truly high-quality products.

Now we have a lime-cement mixture designed specifically for facades. It is allowed to be used for internal work, but this does not make sense, since the qualitative aspects will be redundant. The grain size is average, 1.25 millimeters, and plaster can be applied in a layer of up to three centimeters, completely eliminating cracking. After drying, it creates a dense layer with excellent vapor permeability and a high level of thermal insulation. With such plaster, you will significantly save on heating, and the mixture itself is quite affordable.

If you are looking for a market leader in building mixtures, then it will definitely be Ceresit.A German brand that has long settled in Russia and has several factories for the production of the best plasters, including for facades. Before us are two in one: a mixture for external work and at the same time for repairs indoors.

The secret of versatility lies in the careful selection of the components used in the plaster. The most identical fraction allows you to perform jewelry work, and the frost resistance index - to produce exterior finishes in regions with the most severe climate. In fact, this product differs little from its competitors, but we have before us a famous brand whose product quality can be trusted unconditionally. The main thing is to carefully read the data on the package. If the manufacturer does not recommend applying the mixture with a layer thicker than 2 centimeters, then you should not do this, otherwise the plaster will not be to blame, but you yourself.