Top 10 Muffler Corrugated Manufacturers

Under the brand of this company, muffler corrugations are produced by the best manufacturers in European and Asian countries. The STELLOX trademark does not have its own production facilities, they are engaged in packaging products under their own brand. We included this company in the ranking of the best manufacturers, because their products are in high demand, as they are in an affordable price segment and demonstrate good quality. Of course, you should not expect that a corrugation for 370 rubles will last as long as a similar model from another brand with a minimum cost of 900-1000 rubles. But these parts do their job quite well, and can help out when the budget for replacement and repair is limited. They can be safely put on cars that are used infrequently and carefully.

A Hungarian brand that manufactures suspension, clutch, exhaust systems and other vehicle components. The brand, recognizable in many countries, has production facilities in Bulgaria, Russia and China.The company's assortment of muffler corrugations of various designs includes a three-layer innerbraid, reinforced interlock and a vibration compensator "chain mail", which is considered the most effective in the line of this brand. They are available with or without an additional outer braid. Suitable as analogues for Lada Vesta and other domestic cars. Drivers love the combination of quality and affordability of these bellows, as well as the range to find the right part for a variety of driving styles, from gentle to extreme. There are still few reviews on EuroEx vibration compensators, but there are also negative points among them. Some buyers find that they burn out quickly.

The products of this company are supplied to the secondary markets of Germany, Spain and other countries. It appeared on the Russian car market in 2010. High-quality auto parts at affordable prices for everyone quickly attracted buyers. Cortex silencer corrugations are mainly produced in 2 types - innerbraid and reinforced interlock. A large selection of mounting dimensions allows you to put the vibration compensators of this company on almost any car. Drivers like Kortex muffler bellows for their affordability and how quiet the car runs with them.True, their service life is not very long - after 100,000 km they have to be changed, as the part burns out. However, if the car is not used intensively, such a part can last for 10 years.

Muffler corrugations Garde are an integral part of the exhaust systems of Phobos, a major Russian manufacturer of components for domestic manufacturers. Reinforced three-layer structures (interlock) increase the life of the muffler corrugations of this brand by 2-3 times. The corrugated tube, the inner and outer layer of which are made of stainless steel plates, ensures tightness and prevents the appearance of exhaust gases in the system line. The inner layer contributes to the uniform distribution of exhaust gases in the tube, and the outer layer protects the corrugation from excessive stretching. The brand is quite young, and the products have not yet accumulated many reviews. But they can already be used to judge the high quality of vibration compensators and other Garde components. True, some drivers doubt the durability of cheap corrugated models.

The parts of this Chinese manufacturer are installed at car factories in Japan, South Korea, China and Europe. All factories of the company have their own laboratories and research centers that help maintain a high level of quality of manufactured parts. Patron muffler corrugations are presented on the Russian market in a wide range and have an affordable price. Various types of designs and different mounting dimensions allow you to choose a component for any car. Drivers like how compensators affect the operation of the exhaust system, a large selection and affordable price of corrugations. But the simplest models quickly rust.

A young company that manufactures exhaust systems using components of its own production. If you put a muffler corrugation of this brand on a car, you can be sure that it will last a long time. The manufacturer gives a guarantee for its parts for 36 months - not every factory can boast of such a period. Car owners like both the quality of the parts and the ability to replace them at an affordable price at the Catanet service center.They note the durability, adequate cost and high level of service of the company. The only drawback that can be seen in the reviews is the limited range of spare parts. The vibration compensator of this brand can not be found for every car model.

The young company presented its products to Russian car owners relatively recently, but managed to demonstrate it from the best sides. The muffler corrugations are based on AISI 304 steel, which has increased strength, temperature resistance and is not afraid of corrosion. These components last up to 2-3 times longer than other similar parts, and are cheaper than many. Therefore, they are often put on domestic cars - on Lada Vesta, Grant and other cars. The quality of the corrugations complies with the international standards ISO/TS 16949 and is confirmed by a 2-year component warranty. However, it is difficult to find product reviews from car owners due to their short experience in the Russian market.

The Belgian company Bosal supplies European fleets with spare parts. General Motors has repeatedly awarded Bosal the title of "Best Supplier of the Year". Exhaust systems and other components and parts of this brand are known to car owners around the world - they are made for 6000 different car models. The company has been operating since 1923 and has 31 manufacturing plants and 4 research centers in different countries. Bosal muffler corrugations, judging by the reviews, do an excellent job of damping vibrations and reliably protect the exhaust system. Their design has increased strength and flexibility, so that the corrugations last a long time. Many car owners choose them because of confidence in the reputation of the manufacturer. But the cost of such corrugations is high.

The Danish group of companies JP Group Holding includes three companies engaged in the production of automotive components.The group of companies was founded almost 50 years ago, and during this time the quality of their products has reached a high level and wide popularity. Among the eminent partners of the holding are the Volkswagen and Porsche concerns, for which the JP Group is the main supplier of parts and assemblies. In the secondary market, brand products are represented in 70 countries. Among the wide range of spare parts there are muffler corrugations. Drivers like their efficiency and durability, the choice of models and sizes of vibration dampers, as well as their affordable cost. However, the quality of corrugated pipes depends on the place of production. Reliable components come off Danish and German conveyors, but Chinese production cannot boast of stable quality.

Japanese brand, one of the most important suppliers of automotive components for Eastern European countries. Produces spare parts for Honda, Toyota and Nissan. The company includes 80 factories in Japan, China, Taiwan - more than 10 thousand items of spare parts come off their conveyors. Masuma is the brand with the lowest percentage of rejects among many other manufacturers (only 0.06%).The quality of the parts, including the muffler corrugation, is very high, but still depends a little on the factory where they are produced. Japanese parts are superior in quality to components from other factories. The popularity of the brand has led to the emergence of counterfeit products on the market. The design of branded products contains hieroglyphs and text in a comic style, which can be used to distinguish the original from the fake.