15 Best Electricity Meters

The traditional shape of the meter (round) makes it easy to install a new controller with minimal interference in the existing electrical network of an old apartment or house.Despite the fact that the counting electromechanical mechanism has a rather simple design, the single-phase device does its job perfectly, demonstrating high accuracy in measuring the consumed energy. Its reliability is additionally confirmed by warranty obligations, which the manufacturer of this equipment is ready to fulfill within 4 years.

This electricity meter is not only easy to install. The presence of a backstop and protection against theft make it a more relevant replacement for old induction control devices. At the same time, it can be put on a standard dielectric platform without any problems - the mounts completely match. Nevertheless, this equipment is still a completely modern device, since there is a telemetry output on the printed circuit board of the electricity meter, which allows you to connect the device to the ASKUE remote control system.

The electricity meter works according to the electromechanical principle. It has a protruding scoreboard of 6 rotating reels with numbers that are clearly visible even in low light. The front panel is protected by thick plastic, which is not rubbed over time. The manufacturer issues a 3-year warranty on the meter, and an inspection is required every 16 years. The working part is designed to pass current from 5 to 60 A, which allows you to install the model both in an apartment and in a private house with a boiler and a warm electric floor.

In the reviews, the owners are satisfied with the compact dimensions of the counter 76x90x65 mm and low cost.It is advised to safely buy for a summer residence or in a garage - the meter will fit even in the smallest electrical cabinet for 6 machines. There will still be room for two circuit breakers. The owners positively note the presence of two protective covers (from the input side and from the wall), which increases the safety of operation. Many coped with its connection on their own (RES only sealed).

A modern device with a liquid crystal display is a single-phase counter Incotex Mercury 201.8. It is designed for installation in apartments and houses with a voltage of 220-230 V and a current of 5 to 80 A. The model is quite unpretentious, it can operate at low temperatures (down to -45°C) and high humidity (up to 90%). The meter features a modular housing and measuring transducer. There are screw terminals for connecting to electrical wires, and the device is attached to the wall or shield using a quick-detachable DIN rail. To take readings at any time of the day, LED backlight is provided.

In the reviews, consumers flatter about such qualities of the Incotex Mercury 201.8 meter as a modern LCD display, bright backlight, ease of attachment. The disadvantages include problems with the accuracy of obtaining data.

An excellent ratio of price and technical parameters has an electric meter Energomer CE 101 S6. It is popular with owners of apartments and houses where a single-phase network is laid.The model is characterized by stable operation, and the readings are saved even during power outages. Such a counter is not afraid of low temperatures, it can be placed in an unheated room or garage.

The device is attached to the base with three screws. On average, the durability of the device is at least 220 thousand hours, or about 30 years. The manufacturer gives a 5-year warranty on the device. Homeowners are generally satisfied with the performance of the Energomer CE 101 S6 single-phase meter, especially the affordable price and long service life. The disadvantages of the device are an unsuccessful method of fastening, failures due to factory defects.

The electronic electric energy meter is designed for a voltage of 230 V with a frequency of 50 Hz and the connection of devices with a total current of up to 60 A. The model corresponds to the 1st accuracy class according to GOST 31819.21. The counter has a 7-year manufacturer's warranty, which confirms the reliability of the device. The developers claim that even with intermittent power supply, when the LCD screen goes out, all data is guaranteed to be saved for 32 years. The standard calibration interval is 16 years.

Customers love the convenience of bottom connection with secure clamps. The case is well protected from dust penetration according to the IP51 standard, so debris does not collect under the display glass. The meter works correctly even at a temperature of -40 ⁰С, so it can be installed in unheated rooms. The liquid crystal screen is well insulated and additionally receives energy from the passing voltage.

A two-tariff electricity meter for domestic networks has a compact (flat) body with terminals covered with transparent plexiglass for connecting to the mains. You can monitor the operation of the device on the built-in LCD monitor. In order to save energy, to view the performance of the device, you should click on a special button.

The lack of backlighting in this meter can be considered the most obvious drawback, since the performance and quality of the components used are quite satisfactory. In any case, even experienced users of the PZIP TsE272 do not raise any complaints, and the affordable price and the possibility of two-tariff accounting are no less compelling reasons that attract the buyer.

The model supports operation in a single-phase network with a voltage of 220-240 V with a maximum frequency of up to 52.50 Hz. The minimum limit is 47.50 Hz. The meter is able to take into account the consumption of electricity at 4 tariffs, which is most beneficial with a large number of modern electrical appliances (multi-cooker, air conditioner, washing machine and dishwasher, boiler, boiler, etc.). If you use the delayed start function, you can save a lot by starting household appliances one by one during periods when electricity is charged at reduced rates.

The device is included in the state register. The mounting method is quite universal - it can be mounted on screws or a DIN rail. The display is large, so the readings are clearly visible to people with impaired vision. But it’s difficult for some to figure out how to switch data at 4 tariffs, and, as the owners share in the reviews, the instructions do not help with this.

The most affordable among multi-tariff single-phase meters was the Energomer CE102 S7 device. At one time, the model was included in the list of the best goods of the year in Russia. The counter has a number of useful options. The display shows a lot of information necessary for the consumer. At the same time, the duration of the display can be adjusted, which simplifies the removal of data. The device has a good memory, it stores information about electricity consumption over the past year. Information is stored for 30 years even in the absence of power.

Thanks to the ability to integrate with automated accounting systems, the device is approved by energy supervision employees. Depending on the modification, the device is equipped with a different interface. The electric multi-tariff meter Energomer CE102 S7 attracts consumers not only with an affordable price, but also with a 5-year warranty. Among the main disadvantages, domestic homeowners highlight the unreliability of the device.

The electricity meter can withstand an increased load of 80 A, which allows you to connect not only household appliances, but also compact welding inverters.For example, when powering the RDS of the AIS Resanta-250 with a maximum welding current output of 250 A, the current consumption from the network will be 27 A. There is still a large margin for other tools. The meter is relevant in the country or in a private house where there is a garage, a workshop. With the proper cross-section of the subsequent wiring, the meter will not deteriorate if a drilling and milling machine is used at the same time.

In reviews, the product is praised for its compactness and functionality, ease of setup. But the price of the meter is noticeably different from competitors, although a model is produced in the Russian Federation. The electricity meter is mounted on a DIN rail. The body protection class is only IP20, so it is better not to hang it in a dusty garage or securely protect it with a sealed cabinet.

The commercial multi-tariff meter Mercury 200.02 from Incotex is considered by experts to be the fastest payback device. At a low price, the device will help homeowners to correctly distribute electricity consumption during the day. At the same time, living conditions will remain as comfortable as possible. It will be especially beneficial to supply this model to those homeowners who have electric boilers, underfloor heating, boilers, etc.

The counter integrates seamlessly with an automated accounting system thanks to the built-in PLC modem. The memory stores data on the monthly consumption of electricity, which is very useful in disputes with energy supervisory authorities. Users like the availability of information, the ability to set up an individual schedule, the efficiency of the Incotex Mercury 200.02 meter.Among the shortcomings, there is a lack of backlight and large overall dimensions.

If not for the highest price in this category, the Matrix NP73E electricity meter would become the uncontested leader because of its abilities. The high-tech device works with a three-phase power supply and can be installed in enterprises, private homes, high-rise residential buildings and similar facilities. The equipment easily withstands low temperatures down to -40 °C, which allows it to be installed outdoors in many regions of the country (only a moisture-proof cabinet or niche is required).

The meter supports operation in ASKUE type systems, but can also be used autonomously. At the same time, he will also be able to perform the functions of limiting power or turning off the supply of electricity when the specified limit is exceeded. For this, it is only necessary to carry out the appropriate setting before installation (programming). At the same time, this device has sensors for monitoring the integrity of the housing and compartment with connection terminals, magnetic field and differential current. This makes any manipulation of the device almost impossible, and support for several modulation protocols and encryption of transmitted data reliably restricts access to interested parties.

The Taipit Neva 303 three-phase meter managed to get into our rating due to the lowest price. At the same time, the model is well equipped. A simple and reliable electromechanical mechanism is complemented by a light indicator for each phase. The manufacturer provided protection from a powerful magnetic field, dust and moisture, and also took care of the strength of the case, using reliable materials. The counter operates in a wide temperature range, does not support combustion. The average service life is about 30 years. The manufacturer gives a 5-year warranty. The device is mounted using a DIN rail.

Consumers characterize the Taipit Neva 303 three-phase meter as an inexpensive but reliable electricity meter. It can be used both in apartments and in unheated buildings. The disadvantages of the device include a limited scope.

The model has a standard telemetry output and a mechanical board for displaying readings. It can work in three-phase networks with a voltage of 230 or 400 V. The device itself consumes almost no electricity, and is also resistant to electromagnetic and climatic influences, which ensures the accuracy of readings. The manufacturer has set the calibration interval at 16 years, and the average service life is about 30 years.

The model has been proven and has been produced by a domestic company for a long time. Until 2019, a factory warranty of 4 years was issued for it, although the mean time between failures showed a result of 220,000 hours, but then the device was finalized. This increased reliability, and now the product is guaranteed for 7 years. The manufacturer has also improved the starting current values.You can buy an electricity meter in a private house or workshop in one of two housing versions - P31 or P32, which determines the mounting method: on a DIN rail or in a shield.

The TsE2727A electricity meter, manufactured by the St. Petersburg Plant of Measuring Instruments, is popular with consumers and deservedly occupies the second position in our rating with a minimum lag behind the leader. This high-precision meter is mounted on a mounting panel and can be successfully used both in low-energy enterprises and in a private home.

The device has a load current limit of 10 amperes, and the implemented possibility of remote reading using the RS485 optoport greatly simplifies interaction with regulatory authorities. Not only the functionality of the counter deserves positive evaluations. The equipment of this brand is supplied to the market with virtually no defects (there are rare cases that do not exceed a hundredth of a percent), and the presence of several levels of protection (including from the effects of a magnetic field) and recording any deviations from the standard parameters in the event log makes this electricity controller one of the most efficient.

The most versatile device for metering electricity consumption in a three-phase network is the Incotex Mercury 230 ART-01 CN meter. The device allows you to save electricity, both owners of private houses and entrepreneurs.The two-tariff mode is optimally suited for the competent distribution of energy during the day. The device can work both independently and as part of automated accounting systems.

All information is displayed on the LCD display, starting with the time, date and ending with the network frequency. The consumer can at any time check the voltage in each phase, which helps in the dispute with the energy supply services. Users like the versatility of the Incotex Mercury 230 ART-01 CN meter, reliable intrusion protection, automatic self-diagnosis.