10 best Bosch screwdrivers

The original model, which is exclusively a screwdriver. It will not be possible to put a drill here, since the cartridge is designed exclusively for clamping bits. However, this is not required, since the power of the tool is low, and it will be problematic to drill a hole in anything other than soft wood for the tool. The main advantage here is the ability to work at an angle of up to 90 degrees. Thanks to its compactness, you will get to any inconvenient place. Just do not forget about charging. The battery here is pretty weak. Its full capacity is enough for just an hour of continuous operation. At the same time, the battery is gaining energy for 2 hours, which is quite a long time.

Easy-to-handle impactless screwdriver with removable 18V Ni-Cd 1.5Ah battery. The model weighing 0.9 kg at idle rotates at a speed of 1800 rpm and generates a force of 50 Nm. The device has an engine brake, reverse, electronic speed control and a power button lock. Works flawlessly on any surface. A well-assembled device easily drives fasteners into metal, wood, concrete. BOSCH GSR 12-2 V 1.5Ah x2 Case receives mostly positive reviews, but the model is not without flaws. Among the shortcomings, it is worth highlighting the instability of the device and a long charge of 2.5 hours at 60 minutes. other samples of the line.

This is a household screwdriver, which can be safely attributed to the professional.Its build quality and specifications allow you to work at the highest load. At the same time, it is relatively inexpensive. It uses brushless rotation technology. It allows you to significantly increase efficiency and reduce energy consumption. On a single battery charge, the screwdriver can work up to 2 hours. The ability to switch speeds, as well as manually adjust the speed and power, will also please. Not a single fastener will be torn off by excessive rotation, and if necessary, a bit or drill with a leg diameter of up to 13 millimeters can be installed in the chuck, which is not often found in “non-network” models.

Modern power tools use more and more electronics.Protection and adjustment systems become independent, but in this model, Bosch decided not to deviate from the classics. All options here are mechanical. There aren't many of them. For example, a lock against accidental activation, which looks like a spindle that overlaps a button. The lock in the on position works the same way. It is difficult to say how good it is in modern realities, but the fact that the tool is as maintainable as possible is definitely a plus. The rest is an ordinary drill driver with 600 watts and 4 thousand revolutions. It can be used for any of the two purposes, but when drilling with certain restrictions on maximum power.

When working with a screwdriver, you often have to change fasteners and each element requires its own settings. This is inconvenient and time consuming. With this model from Bosch, there will be no such problems. The tool itself can select the optimal characteristics depending on the load, and it does it instantly.The manufacturer's description indicates that the model is characterized as a drill driver, but it can only be used for drilling with reservations. The rotation speed is limited to 2.5 thousand revolutions, and the torque is set at around 20 units. Of course, with these parameters, you can even drill through metal or dense wood, but only in a small diameter.

The main advantage of this Bosch cordless screwdriver is its durability. It is due to the metal case, more precisely, the aluminum top. Not only is it strong, but it also helps cool moving internal parts, making long, uninterrupted work possible. In addition, there is built-in protection against overloads and overheating. It is almost impossible to damage a screwdriver. And the disadvantages include only one speed. It is adjustable, but it will not work to set the rotational speed as accurately as possible. At a speed of 4.5 thousand revolutions per minute, this can be a definite problem, especially if you use the tool for its intended purpose for tightening fasteners.

Bosch has repeatedly proved that a screwdriver can also be used as a drill, while it does not have to be huge. This model has a very compact form factor, but has all the qualities for drilling various materials. Of course, there are limitations, for example, in metal, the hole diameter is only 20 millimeters. But if you believe the reviews, then the parameter is greatly underestimated. This can be trusted, as the design uses a brushless motor, which significantly increases the efficiency of the tool and makes it more durable.The built-in battery, which comes with a satellite and a charger, will also please.

If you are looking for a compact drill with which you can easily get into hard-to-reach places, be sure to pay attention to this Bosch model. This is a universal tool that can both tighten fasteners and drill holes, even in metal. The load power here is not the highest, it is recommended not to exceed a drill diameter of 20 millimeters when working with hard materials. But this is quite enough, given the specifics of the instrument. Its main advantage is compactness. But the rotation speed is at an acceptable level, 1,500 rpm. Pumps up only a torque of only 30 N.m.

A tool from Bosch has never been distinguished by a democratic price tag, but its collection also has affordable models, for example, this screwdriver. All the advantages of the German manufacturer, such as reliability and durability, are preserved here. Specifications are also excellent. The tool allows not only to tighten fasteners, but also to drill holes with a diameter of up to 20 millimeters inclusive. Not the highest result, but quite adequate for such a compact screwdriver. Ergonomics will also please users. A small battery does not stick out, but is built into the handle. I had to sacrifice power, but even in this form factor it is 1.5 Ah.

2-speed universal screwdriver for all purposes. A torque of 54 Nm allows you to screw fasteners equally well into concrete, brick, metal and wood.Depending on the type of surface, the model allows you to drill holes with a diameter of 8 to 35 mm. At idle, the speed of rotation of the bit reaches 1700 rpm. The presence of backlight, reverse, multi-position spindle lock, power button lock, electronic speed control and automatic ECP for overload protection makes handling a screwdriver as comfortable and safe as possible. The model comes with a pair of Li-Ion batteries with a voltage of 18 V and an energy of 1.5 Ah, a charger and a storage case.