15 best calipers

The rating of the best vernier calipers is opened by a model of a domestic brand made in China. For the money it can be called quite good. This is a frankly cheap caliper for rough measurements of objects up to 150 mm. Not useful in production, because it has a noticeable error. But for the home in most cases it will do just fine. The manufacturer claims that the error is ± 30 microns, although in fact it is clearly more due to blurry marks. The division price of the model is 0.02 mm. There is a depth gauge and a second pair of jaws for internal diameters.

The tool is made of carbon steel and has a chrome finish. Supplied lubricated and in a plastic case with foam padding. This ensures the safety of the model during transportation and storage. Lubrication and coating protect against rust. In the reviews there are complaints about the quality: after several months of use, the chrome coating begins to peel off. Some models come with a knocked down zero, but some users note that this is easily fixed.

Chinese caliper - inexpensive, but quite high quality. For a low price, you get a stainless steel tool that has good accuracy. Unlike the previous nominee, ZiPOWER PM4264 has virtually no backlash, scratches, burrs and other shortcomings of cheap production. The scale is engraved, but it is rather faded, so in low light or poor eyesight you will have to peer.

Suitable for measurements up to 150 mm. The division price is standard for nonius instruments 0.02 mm. The error, alas, is not indicated by the manufacturer. But in the reviews they write that it is unlikely to significantly exceed ± 50 microns. A depth gauge is also standard. Sponges are sharply sharpened, but for marking they should only be used on wood - they will not cope with metal. The disadvantage is the lack of a box in the kit in which to store the tool. The caliper is supplied in a plastic blister, which quickly becomes unusable.

Third place went to the caliper, which is sold at a relatively low price for such high quality. The manufacturer positions this model from the Expert series as a professional one. The caliper is made in accordance with GOST 166-89. Judging by the reviews, after verification it can be safely used in production, not to mention household measurements - its accuracy is enough for almost any job, even if it is somewhat inferior to electronic models. The rather contrasting engraved scale pleases - you don’t have to peer into the risks to take readings.

The length of the rod allows you to measure objects up to 200 mm. The division price is 0.05 mm. The error is within ±50 µm.The body is prefabricated, made of hardened steel, the surface has undergone diamond processing. Therefore, there are no burrs, chips and extra roughness, which will allow you to smoothly and accurately move the caliper jaws. Therefore, working with him is a pleasure. There is a depth gauge. Comes in a sturdy plastic case for easy storage.

The caliper is from a well-known Chinese company that has been manufacturing tools for almost 40 years. Thanks to this experience, the brand produces really high-quality products. And this model is no exception. It has good accuracy and durability. Caliper error "out of the box" - ± 50 microns. However, in the reviews, buyers note: it can be adjusted so precisely that after refinement it is suitable even for precision production. A depth gauge is also available, which, combined with the amazing length of the tool, opens up many possibilities for using the model.

This vernier caliper is the longest in the vernier category. It allows you to measure objects with a width or diameter up to 250 mm. The division value on the scale is 0.05 mm. The carbon steel of the model has a high-quality smooth coating. It will not peel off the tool after several months, which provides good protection against rust. A nice feature: the numbers on the scales of the rod and vernier are not drawn, but engraved. Therefore, they will definitely not be erased over time. The box is plastic, convenient.

Despite the harsh foreign name, the caliper is made in Russia. It belongs to the first class of accuracy.Received a small error for the vernier model - ± 50 microns. In fact, this value practically does not differ from reality due to the careful processing of the measuring surfaces and fine tuning. This caliper can measure up to 200 mm maximum. Assembled securely, no backlash, smoothly polished. The measurement step is only 0.05 mm. There is a depth gauge, which expands the possibilities of using the tool.

The caliper is noticeably more expensive than other vernier models. However, it is made of such high quality that it will pass verification without any problems and will become a tool that will find a place even in precision production. A second pair of jaws is available for measuring inner diameters. However, there are no marking jaws. On the reverse side of the model there is a table of threads, which will facilitate the measurement of threaded elements.

And our rating opens with an accurate and high-quality, but not ideal caliper from the Russian company Norgau. The model is intended for professionals who rarely save on tools. It is able to cope even with precise measurements due to the careful study of each element and further adjustment.But, alas, it has a division price of 0.02 mm, while the standard for many dial models is 0.01 mm. The depth gauge is normal, flat.

The caliper is included in the State Register, which confirms the high quality. On sale you can find models with both already done verification and without it. The first, obviously, is more expensive, but it eliminates the need to pass verification on your own. Strong tool stainless steel allows the tool to be in working condition for many years. Moreover, the dial of the caliper is additionally protected from shock and dirt. In the reviews, professionals speak warmly about the tool: it is great for the home workshop and production, copes with measurements of varying degrees of “roughness”.

Quite high-quality, but frankly simple caliper for a reasonable price. The model is produced in Poland, so it has good quality at a not the highest price. The tool has an error of ±20 µm, which makes it possible to attribute it to the first class of accuracy. However, in this regard, it is inferior to more accurate models of our rating. Of the adjustments - only setting zero on the dial indicator. However, the model is not designed for fine tuning and work in production - it was created for home workshops and household measurements.

The body is made of strong stainless steel, so the tool is durable. Measurement range - up to 150 mm. There is a depth gauge. Jaws for measuring internal diameters are thin, so they can be inserted even into very small slots and holes. The dial received large numbers, which will be appreciated by buyers with poor eyesight. There are no clear instructions in the kit, so it is not suitable for beginners.The model is not capable of measuring in inches.

A large and handy tool produced at the Chelyabinsk Tool Plant. Allows you to measure parts and diameters up to 300 mm - the best indicator of the rating. At the same time, it has high accuracy: the division value is only 0.01 mm, the error is ± 30 microns. The tool is made of hardened steel. The measuring surfaces of the jaws received a hard-alloy coating. This protects them from damage and therefore extends their service life with perfect precision. Depth gauge available.

A distinctive feature of the domestic model is the anti-shock protection of the dial case. This is ideal for industries where tools are not handled with care. However, high quality dictates a high cost - the model is much more expensive than most pointer and even digital calipers, so it is simply not advisable to purchase it for a home workshop. On sale you can find calipers in a wooden case, so the model will look presentable as a gift.

Caliper from a manufacturer that has actively integrated into the Russian market and received registration in the State Register. Despite being made in China, this caliper cannot be called inaccurate or of poor quality. He received a measurement accuracy of up to 0.01 mm and an error of no more than ± 30 microns. In addition, models with verification can be found on sale, which confirms their accuracy and compliance with European and Russian quality standards.Some batches are produced at CHIZ, but at the same time they cost less on average.

A small caliper with an upper measurement limit of only 125 mm and a depth gauge. Constructed with precision and quality from hardened stainless steel for maximum durability. The stroke of the jaws is smooth, when tightening the locking screw there is not even the slightest backlash. At the same time, it is convenient to move the sponges thanks to the plastic embossed finger rest. In general, the model deserves attention, as it will not let you down at the wrong time, but at the same time it is cheaper than domestic similar tools.

Another caliper from the Chinese manufacturer Matrix. It features a reliable pointer mechanism: the case is protected from dust and moisture, but we recommend that you do not subject the model to unnecessary checks. The tool is made of stainless tool steel. It is smoothly polished and machined so that not a single burr remains. Sponges move smoothly, so that it is convenient to use. The tightening screw eliminates play completely.

The division price of the instrument is 0.01 mm, while objects up to 150 mm can be measured with it. The measurement error is minimal for a pointer caliper: ±20 µm for the first 100 mm of the scale and ±30 µm for the remaining 100 to 150 mm. This refers it to the first class of accuracy. There is a special case in which it is recommended to store the instrument in order to avoid damage to the dial mechanism. In general - an inexpensive pointer caliper, which at the same time is not inferior in quality to more expensive ones.

Another domestic caliper, but this time digital. Shows measurements down to 0.01 mm. The model lives up to its name "Expert": its accuracy and convenience will suit experienced users in domestic use. An error of ±30 µm will not allow it to be used in precision production, although it will fit for rough measurements. The depth gauge is medium - thin, but flimsy. The digital screen is encased in a metal case, strong enough to survive the occasional knock. But it's still not worth checking it out. The display turns on automatically when you move the jaws, so you do not have to press the button every time.

The model can measure objects up to 150 mm in both centimeters and inches. A duplicate inch scale is also marked on the stem. Under the display case there is a wheel for one-hand operation. The caliper is made in a cheerful blue color, so it will be noticeable from afar and will not get lost among a pile of steel scraps and parts. It would seem a small advantage, but losing a metal caliper on metal parts is not so difficult.

Electronic caliper for the home workshop, which received a huge amount of positive feedback. Many users trust this model and praise it for its authenticity and reliability. Shows with an accuracy of 0.01 mm and measures up to 150 mm. Made entirely of metal, even the dial case. This significantly improves durability and reliability. In the reviews, buyers note the quality of the surface treatment: the caliper is perfectly smooth and even. However, they clarify: the error of the model is ± 30 microns, so it is not always suitable for precise production.

The model is able to display the measurement result in both millimeters and inches. The lips are equipped with a metal roller, which makes their mixing or breeding even smoother and more enjoyable with just one thumb. There is a thread chart on the back of the dial case. The case of the model is not a standard storage box. Inside, each element has its own place - in polyurethane, beds are cut out for both a caliper and spare batteries. Therefore, the tool will survive even tough transportation - it will not even budge if the case shakes.

The STAYER trademark belongs to the Kraftool company, whose caliper is also in our rating. However, both of these models deserve a place in the list of the best, as they are distinguished by true German quality, while having their own characteristics.Specifically, this stylish caliper is aimed at experienced users, but at the same time it has a rather low price. The model received a bright design in black and yellow shades: bright risks will be visible even in dim lighting.

Caliper measurement step - 0.01 mm, error - ± 20-30 microns, not suitable for every production. The measurement value is up to 150 mm. Displays the result in both millimeters and inches. It is noticeable that the Germans tried to save on production without sacrificing quality. The body of the screen is made of rough hard plastic. It is embossed, which will facilitate the use of the tool. For one-handed use, there is a special lever under the electronic unit.

Vernier caliper of a large German manufacturer that has been producing quality tools for amateurs and professionals for more than 20 years. Differs in the increased reliability of assembly and good measurement accuracy. It is able to measure a part up to 200 mm with an error of only ±20-30 microns. Details are fitted neatly and precisely, carefully polished. Therefore, the stroke of the sponges is soft and pleasant. You can use the tool even with one hand - for this there is a special thumb wheel.

The upper jaws have received rather thin and small tips, so they can crawl into any hole. The depth gauge of the model has a small width, which will allow it to pass even into small cracks and holes. At the same time, the probe is thick enough not to bend during the measurement process. The display case is made of nice plastic. Access to the battery compartment is easy - just remove the cover.Therefore, the battery changes almost instantly, and you do not have to break away from production for a long time.

Definitely the best caliper for those who understand quality tools. It is expensive, but its money is fully justified. The model is considered one of the best on the market, it combines high measurement accuracy (more precisely, only indicators and micrometers), excellent reliability and equipment with additional functions. The model has an error of only ±20 microns, which makes it one of the most accurate on the market in general and in our rating of the best in particular. Can measure parts up to 200mm.

The display case is protected from dust and moisture according to the IP67 standard. That is, the caliper can even be “bathed”: it will withstand a short-term immersion to a depth of up to a meter. The rest is made of hardened stainless steel and perfectly polished. The electronic filling of the model stores enough different functions to work with measurements. The caliper can switch measurement methods from absolute to relative and vice versa, save the last measurement, switch to inches or centimeters. In addition, it shows when the battery starts to run out.