Top 10 Micrometers

And our rating of the best micrometers opens with a model with a low price and quality that has not been affected at all. Quite a decent model for the money, designed to measure distances of 0-25 mm. The micrometer is intended primarily for measurements that do not require precision down to the micron. The division value is 0.01 mm, while the error is no more than 2 micrometers. This model will ideally fit into the tool box of a car mechanic, modeler, repairman. It will not be superfluous in the home tool kit.

Top quality tool steel shackle. It is additionally coated with enamel, which prevents rust. Pleased with large and comfortable pads made of thermal insulation material - it is convenient to hold a micrometer for them or mount it on a special tripod. The heel and micrometer screw are hardened and have special carbide surfaces that are able to wear out for a long time even with constant use. This allows the micrometer to remain accurate for a long time.

An inexpensive micrometer that is perfect for people who do not chase the first class of accuracy and allow an error of up to 0.01 mm (even if +/- 2 microns is indicated in the documents, in fact it turns out a little more). Ideal for the home workshop or production with large tolerances. Allows you to measure distances from 0 to 25 mm, shows with an accuracy of 0.01 mm. Only one size is available for sale. In reviews, buyers note that some models may require calibration immediately after purchase.

In general, the tool is assembled reliably, although in some cases it may require minor corrections. The bracket has an overlay and is covered with enamel against corrosion. There are notches on the drum and ratchet, so the tool will not slip in the fingers. It's nice that for such a low price, the kit includes a high-quality plastic case and a calibration key. The pale scale on the drum and stem is not encouraging - in poor lighting or poor eyesight, you will have to look closely at the instrument in order to take readings.

The tool does not look too elegant, but it does an excellent job with its direct duty - to measure. Specifically, the reviewed model is designed to measure parts from 0 to 25 mm. However, you can find micrometers up to 300 mm commercially, so it's easy to find options that suit your needs. According to the documents, the error of the tool is up to two microns, so after calibration and verification it can be used even in precision work. You can also purchase micrometers with calibration and even verification for a small surcharge.

The tool bracket has special heat-insulating pads.The measuring surfaces are carbide, carefully lapped and centered. The scale is clear and easy to see, so that even visually impaired people can use the instrument without discomfort. In the reviews, many buyers praise the model, noting its high quality and excellent accuracy. You can safely take this micrometer even for precision production.

The micrometer of a domestic manufacturer - the Chelyabinsk measuring plant, which is distinguished by the high quality of the instruments produced and the average prices for them. Allows you to find out the dimensions up to 0.01 mm, while it corresponds to the 1st accuracy class. It is designed for measurements in the range of 0-25 mm, although models with sizes up to 150 mm can also be found in the sale of the factory. In addition, on sale you can find models immediately with verification, which will allow you to immediately use the tool in work and be sure of its accuracy.

The drum and ratchet are knurled for ease of use and to prevent slipping. The bracket is equipped with special thermal insulation pads that do not allow the metal to expand under the heat of the hands. The metal part of the bracket is coated with corrosion-resistant enamel. The screw and heel are made of stainless steel and have carbide measuring surfaces, perfectly matched and lapped. They will not wear out for a long time even with active use. This is a great tool for both home workshop and production.

A professional German instrument that will appeal to professionals who understand a lot about a quality instrument. The micrometer has a division value of 0.01 mm and a minimum error of up to two microns, confirmed by calibrations and verifications. The manufacturer produces various models from 0-25 mm and up to 175-200 mm. It's nice that under the order you can find models not only with a millimeter, but also with an inch scale in sizes from 0-1 to 7-8 inches. It will come in handy if at some production it is necessary to take readings in inches.

The scales are coated with matt chrome, which at the same time provides high protection against corrosion and abrasion, and also facilitates reading. The heel and micro screw are made of hardened steel and chrome plated so they won't rust. They have carbide surfaces with a perfectly smooth and precise fit to each other. The bracket is made of strong tool steel, varnished and enclosed in a thermally insulating lining with a pleasant corrugation for greater comfort when working. There are also notches on the drum and ratchet.

A handy 0-25 mm micrometer designed for use in precision manufacturing. The stated error is within a micron, although in fact it can reach two micrometers. By the way, there is also a vernier scale on the stem, so you can work with a micrometer even if the battery is accidentally dead in it, and there is no way to change it right now. It is inconvenient that the model has only two buttons, each of which has two actions recorded. At first, it will be difficult to get used to using it.

The manufacturer claims that the device can be connected to a computer. However, it does not indicate how. The body of the model is quite bright, so it will not get lost in the workshop or when working on the street. The ratchet and drum received a comfortable rubber handle for turning the micrometer screw. The metal parts are enamelled to prevent rusting. Carbide measuring surfaces will not deform for a long time, which will provide accuracy for many years to come with proper care. In general, this is a good and accurate micrometer that does not cost sky-high money and is available to everyone.

Another high-quality micrometer from the Chelyabinsk Tool Plant, this time digital. The model is designed for measurements in the range of 0-25 mm and displays readings up to 0.001 mm. The error declared by the plant is up to 2 microns, which corresponds to the first class of accuracy. Naturally, this model has all the necessary functions: setting zero, switching units, holding readings.The micrometer is assembled with high quality, so it can work for many years. Carbide measuring surfaces are perfectly smooth and carefully lapped together for maximum reading accuracy.

The case is protected according to the IP54 standard, which will not allow dust and rain to damage the electronic components of the micrometer. In addition to the four-button model, you can find a two-button model on sale - it is several thousand rubles cheaper, but also less convenient, as it has fewer functions. The tool is powered by two CR2032 batteries. A durable plastic case will protect the device from damage.

Not a bad Ukrainian micrometer of the first class of accuracy. It is considered one of the best in the Ukrainian market and undergoes metrological control before sale. With its not the highest cost, it is of good quality. Measurements are calculated in the range of 0-25 mm and reflect readings up to 0.001 mm. The manufacturer's assortment also includes micrometers with great measurement capabilities - 25-50, 50-75 and 75-100 mm. The manufacturer claims an error of up to 2 microns, which indicates compliance with the declared accuracy class and is confirmed when testing on end blocks.

The case has protection against dust and moisture of IP-65. The model can be connected to a computer, but only according to the RS-232 standard. No Wi-Fi is provided. The micrometer is sold in a durable plastic case with foam rubber filler. This will protect the precise and fragile instrument during transport or storage.In general, this micrometer can be called an excellent ratio of low cost for a professional instrument and high accuracy.

The second place is occupied by a high-quality, but not the most expensive micrometer. The device allows you to measure parts from 0 to 25 mm. Its resolution is 0.001 mm, so after calibration and verification it will be suitable for the most precise productions. In addition to the 0-25 micrometer, the manufacturer also has options 25-50, 50-75 and 75-100 for sale. Their quality is equally high, so you can choose a model for your needs. Buttons on the case allow you to switch between inches and millimeters, hold readings, set your own zero limit.

The measuring surfaces are made of hard alloys and carefully lapped to each other. The drum is covered with matt chrome, and the bracket is enameled, which provides protection against rust and, accordingly, a long service life of the tool. It's nice that the electronic filling of the micrometer is protected according to the IP65 standard - from dust and strong splashes and water jets. The instrument's LCD display is large and clear, so even a person with poor eyesight can read the readings. In the reviews, buyers write that the micrometer is really very accurate. The model is included in the State Register. After five minutes of inactivity, the device turns off, so the battery will not “burn out” just like that.

A professional tool for those who are willing to spend about 25-30 thousand rubles on a micrometer.Has excellent quality and the highest accuracy. Designed for 25-50 mm and has a resolution of up to 0.001 mm. Corresponds to the first class of accuracy. Constructed from high quality hardened steel and lacquered to prevent rusting. The stem with a built-in ratchet has an easy-to-turn handle. The case is solidly assembled and protected by IP65 technology. Naturally, the excellent German quality and the ability to connect directly to a computer fully pay off the high cost of the tool.

It has many additional functions - fixing the last value, setting the indication to zero in any position, setting tolerance limits and warning limits, switching measurements to inches. The device can transfer all data via Wi-Fi to a computer thanks to a special MarCom application. The main advantage of this digital micrometer is the ability to connect to a computer and transfer data directly. This can facilitate the work in cases where it is necessary to record the obtained measurements on a PC.