10 best klupps

Any threading tool must comply with state standards, but in fact, many manufacturers ignore this fact, releasing products that are completely contrary to established standards. Most often this happens with Chinese products, but in this case we see compliance with all standards.

BSPT is an international standard corresponding to Russian GOST 6211-81. The manufacturer also indicates technical production features, such as heat treatment of steel and a hardness of cutters of 60HRS. A lot of information about the product, which is already an advantage over other products. Perhaps the point is in the homeland of the brand and the need to comply with production standards in Russia.Yes, the klupp is made in China, but it is tested by us, where it receives a certificate of conformity. True, you have to pay for it. The price is for a set of three dies, as well as for the most convenient and reliable case.

The ratchet is not a unique phenomenon in such a tool, but we have identified it as the main advantage of this product. This is because he has nothing else to brag about. Standard threading set of three dies, the ratchet itself and two wrenches of various lengths. Everything is packed in a plastic case, which even outwardly looks unreliable and, most likely, the fasteners will quickly fail.

In addition, we do not know anything about the steel from which this die is made. The manufacturer is silent about such moments, and little is known about Cnic itself. There is no information about it, but the presence of this product on AliExpress gives us an idea of ​​where it comes from. However, this cannot be attributed to the minuses, and worthy goods often come from the Middle Kingdom. At least there are a lot of positive and neutral reviews about these klupps on the net. There is no frank negativity towards the instrument, which is already good.

The problem with Chinese goods is that their quality is not regulated in any way. The manufacturer is free to do whatever they want and sell their product. There are no such concessions for European brands, which is why they are often much more expensive. Before us are Polish klupps who strictly advise the production standards of Europe. The product is certified, which indicates its quality.It uses high-carbon steel 9XC, which is already a clear advantage over Chinese counterparts.

But the price has gone up. Yes, it is not sky-high, but it should be understood that there are only 4 dies in the set with a diameter of 10 to 25 millimeters or from 3/8 to 1 inch. For the same price, you can easily find a Chinese set, which will include 6 or more modules. It should also be noted a convenient collar, the handle of which is finished with foamed polyurethane. A trifle, but it becomes much more pleasant to work.

Before us is a unique phenomenon - a product, the quality of which is little known, while according to statistics it is the most popular on the trading floors. If you look in the product description, we do not find any information at all. The manufacturer does not indicate the grade of steel from which the die is made, but the threading tool must comply with certain standards. There is only a diameter of the dies, from 3/4 to 1 inch, and that's it.

At the same time, there are a lot of positive reviews about the product, and as we have already mentioned, sales statistics speak in its favor. However, the brand is quite popular, and this also plays a role. Yes, it is exclusively Chinese, which leaves some imprint on the quality, but the price is quite acceptable. According to the users, the klupp lives up to expectations. There are not enough stars from the sky, but it shows itself perfectly in business and does not crumble after the first month of operation.

This klupp did not just take first place in the ranking. As a rule, Chinese tools do not indicate the grade of steel from which they are made.This makes it impossible to pass judgment on their quality. In this case, everything is different, and the manufacturer immediately tells us that the klupp is made of high-alloy steel 9XC.

Before us is a set of nine positions, packed in a small plastic case. There are 6 dies with a diameter of 3/8 to 1 inch. They come with a holder and two collars of various lengths. It should also be noted that the holder with a ratchet, that is, the tool is as convenient as possible. If we talk about the fact that the manufacturer clearly indicated the steel grade, then you can be sure that the ratchet also meets certain standards, that is, the whole set is quite high-quality and reliable. This is also confirmed by customer reviews, who are not deterred by the relatively high price. Not sky-high, but higher than competitors.

An electric screw cap is a very expensive tool. Its cost can reach hundreds of thousands of rubles. Yes, it is designed for industrial use, but still the price tag is very high. Now we have the cheapest electric die cutter designed for cutting external threads on pipes with a diameter of half an inch to 2.

Of course, the price is low in comparison, and for this money we get a fairly simple instrument that does not stand out for something outstanding. The motor power of 1300 watts, in fact, is redundant, but it rotates the die at a speed of more than 30 revolutions per minute. There is a reverse with a speed of almost 70 revolutions, but the switch is not located in the most convenient way, so you have to work with two hands. Also, it is impossible to install an additional adapter here, which limits us to the original die size. But the compact form factor makes it possible to get into difficult places.

Chinese threading tools often sin with deviations from the standards. In fact, this leads to constant problems in the workflow, but there are models that strictly comply with the existing standards. In this case, the tool complies with BSPT and NPT as well as CSA and CE. An important advantage for such a tool.

Also here is the most powerful engine - 1,300 watts with the ability to thread a pipe at a speed of more than 30 revolutions per minute. There is a reverse, rotating at 70 rpm. Switching is convenient, allowing you to handle the clamp with one hand. Also included is a set of 9 heads, ranging in diameter from half an inch to 2. In fact, this is the best combination of price and quality. Not the most advanced option, but worth much cheaper than European counterparts. In addition, it is able to work without respite and overheating for many hours.

The main disadvantage of most electric die cutters is the inability to use dies larger than the established diameter.As a rule, it is limited to two inches, but in this case we have the opportunity to increase this parameter to four. This became possible thanks to the use of an additional adapter that is put on the instrument over the first one. According to the manufacturer, a unique fastening system is used here, which completely excludes the adapter from jumping off the seat.

Klupp is equipped with an engine with a power of more than a kilowatt with rotation in the working direction up to 25 rpm and reverse up to 56 rpm, respectively. The design of the tool and the holding clamp are made in such a way as to be able to work in the most cramped and inconvenient places. The manufacturer also focuses on the protection of the gearbox and the chip removal mechanism. Security is at the highest level here.

There is no limit to perfection and prices. This threading tool is a direct proof of that. More than one hundred thousand rubles, for which we get real German quality and the best technical characteristics. Since the thread-cutting tool must comply with the standards and GOSTs, its production is a rather complicated process. Here, all norms are strictly observed, and errors are also within acceptable limits.

The ergonomics of the tool deserves special attention. Pipe threading is often done in inconvenient places, and not every tool is able to get into them. This klupp will climb into almost any niche, and is also capable of cutting in close proximity to the wall. Of course, the price is very high, but it should be understood that the tool is designed for industrial use. This is not a household plug.It withstands the most severe loads.

Threading pipes is an energy-intensive process, which in this case is taken over by an electric die cutter with a ROFIX adapter. This is real German quality. No Chinese elements or assemblies. Everything is made in Germany, hence the price. Yes, the tool is very expensive, but it is designed for production use and maximum loads. He does not need a constant respite, which significantly increases productivity.

Klupp uses a 1010 watt electric motor with a threading speed of 25 revolutions per minute and the ability to adjust the rotation speed. The reverse stroke is 60 revolutions, and the switching is as convenient and fast as possible. The tool is designed in such a way that it can be operated with one hand, and the design allows you to get into the most inaccessible places and work directly against the wall. The kit already comes with a set of dies made of high-alloy steel.