10 best folding knives for every day

A budget folding knife in EDC format, which can be safely recommended to hunters, fishermen and all outdoor enthusiasts. Due to its small size, the model is perfect for daily urban use. The blade is made of martensitic stainless steel, which keeps sharpening well even with intensive use. At the same time, one should not forget about appropriate care - with prolonged contact with a salty environment, rust may appear. Due to the large width of the butt, the model is not afraid of high loads and easily withstands impacts. The abundance of metal in the handle affected the weight - the knife is quite heavy, which causes dissatisfaction with some owners.

A simple and reliable folding knife with a Caucasian walnut wooden handle. To protect against rot and harmful microorganisms, the wood is impregnated with a compound.But the screws are made of stainless steel, and therefore do not need additional coating. As a structural material for the blade, manufacturers use Japanese AUS-8 steel or domestic analogues. Finishing polishing gives the surface of the blade an attractive appearance. The dissatisfaction of individual owners is caused only by the type of castle. Along with a simple design and ease of maintenance, there is almost no fixation of the blade, which folds at the slightest load.

Proven materials, high-quality assembly and an affordable price (up to 5,000 rubles) are the secret of the success of a popular model from a well-known American company. The blade is made of stainless steel, well known to gunsmiths, which holds its shape quite well and is easy to straighten. The handle, stylized as a bamboo stalk, is an impact-resistant thermoplastic that fits well in the hand even at sub-zero temperatures. The patented Leaf-Spring linear mechanism is responsible for locking the blade in the open position, which demonstrates impressive load resistance. Two metal bearings ensure smooth operation of the mechanism.The model has no pronounced shortcomings. But if you find fault, the disadvantages include the uneven width of the sharpening of the cutting edge.

A classic model that enjoys the well-deserved love of Russian and foreign fans of edged weapons. Some experts consider the design of the knife outdated, but due to the reliability of the assembly and unpretentiousness in use, the blade continues to be in demand. The model is made quite simply, without frills. When unfolded, the knife has a somewhat unusual appearance - the blade is slightly higher, which gives an excellent thumb rest against the notch on the butt. The handle sits perfectly in the hands, and the blade unfolds very easily, without requiring additional effort. Also, the pluses include razor factory sharpening.

Great budget model for everyday use. Unlike most cheap analogues, the blade is already sharpened at the factory, which allows you to use the knife immediately after purchase. Proven by more than one generation of Russian gunsmiths, 95X18 steel holds sharpening well and tolerates work well in adverse conditions. Left-handers will appreciate the versatile design that allows you to quickly open the blade with either hand. The aluminum handle sits surprisingly well in the hand and does not slip during operation. The disadvantages of the model include a lot of weight - you can’t put a knife in your jeans pocket: it will be inconvenient. Best to carry in a bag or jacket pocket.

A practical folding knife with a tactical design and excellent everyday functionality. The anti-reflective coating of the blade increases the corrosion resistance of the metal. Clip-Point shape with concave descents provide the blade with high penetration and a good cut.The proprietary Emerson Wave® Opener system allows you to quickly open the knife at the moment you remove it from your pocket. The advantages include the presence of a hole for a lanyard or a safety cord. The only drawback is the rather high cost of the knife. Some users rightly point out that products from China should be somewhat cheaper.

This model can be briefly described in one phrase - thoughtful design. Instead of a regular peg, the manufacturer uses a knurled washer. The special shape of the handle reduces the likelihood of fingers getting on the cutting edge. And the handle is made of carbon - a rarity for budget knives, costing up to 5,000 rubles. The sharp-tipped blade easily pierces any material, and the factory-sharp edge doesn't need to be sharpened often. The blade itself is made of stamped tool steel, which is characterized by increased hardness. This brand cannot be called completely corrosion-resistant. Prolonged contact with a damp or acidic environment can darken the surface of the metal, so it is recommended to wipe the blade dry after each use.

The best option for those who want to buy a reliable knife for every day. The design of the model includes a clip for easy carrying on a belt or in a pocket. The blade is made of BUCK's traditional 420HC high-carbon steel, which is characterized by high toughness and strength. It is worth noting that the blades made of this metal quickly lose the sharpness of the cutting edge, but they are corrected without any problems with any sharpening device. The handle is made of a lightweight and durable polymer composition that is resistant to abrasion. And the classic Back Lock, which can withstand significant loads, completes the overall picture.

A practical Swiss knife, the design of which includes ten tools for all occasions - from a corkscrew and a screwdriver to an awl and a stripper. Unlike cheap counterparts, tools perform their function and can be used for their intended purpose. The blade blade is made of German stainless steel, which is highly corrosion resistant and keeps sharpening well. There is a special loop for quick opening of the blade with one hand. In the open position, the blade is fixed using a simple and reliable Liner Lock mechanism. The only thing that confuses the model is a very short warranty, which is valid for only a year. This is not quite what you expect from a knife from Switzerland, even if it is a budget segment.

To produce a budget knife, the company had to move production to China. This decision was not liked by some fans of the brand, who say that the quality of the model does not match the products released in the USA at all. It should be noted that there are no specific claims to the model.On the contrary, the owners note the high quality of workmanship, the absence of backlash and other defects inherent in cheap Chinese-made knives. Special mention deserves a lightweight, ergonomically shaped handle made of glass-fibre reinforced nylon. Thanks to the corrugated surface, the knife lies perfectly in the hand and does not slip even after prolonged use.