9 Best LVLP Spray Guns

Have you decided to paint the gate, a large container or even a car with high quality? If you're in no hurry and want great results, choose a spray gun with LVLP spray technology. Which pneumatic models are especially popular, have positive reviews and good characteristics, you will learn from our ranking of the best.
 
  Name
  Rating
  Nomination
1 Stels AG 950 LVLP 57367 4.91
Soft application
2 JONNESWAY JA-LVLP-25G 4.80
Wide range of nozzles
3 Stels AG 970 LVLP 57369 4.72
For hard to reach places. Economical paint consumption
4 PATRIOT LV 162A 4.60
High performance
5 HUBERTH LVLP R500, 1.7 4.53
Best Air Saving
6 Metabo FSP 600 4.52
For water-dispersion paint
7 PATRIOT Lvlp 1.2A 4.48
Nice design
8 ECO SG-3000L 4.36
Wide range of spot widths
9 Garage 162А2 1.5 8085080 4.25
Best price

Spray technology under the acronym LVLP stands for Low Volume, Low Pressure. Translated, this means "small volume (of air) and low pressure" from the compressor. Unlike other technologies, spray guns with this head do not require a powerful air supply line or a pump with a huge receiver. Due to the expansion of the channels in the nozzle, the incoming pressure of 1.6-4 atm drops to 0.7-1.2 atm. This “softens” the torch, there is no strong rebound of drops from the surface, paint is saved. Since fine droplets are formed and flow at low speed, the substance is deposited smoothly, even distribution and excellent results are ensured.

But due to the low pressure and volume, the speed of work is significantly reduced. LVLP spray guns can be used in professional commercial applications where a high quality finish is needed but there are no tight deadlines. In Russia, products of imported and domestic brands are sold, the most popular of which are: Stels, HUBERTH, Metabo, PATRIOT, etc. Spray guns are distinguished by the quality of the nozzle, which determines the service life and shape of the torch. The price range of LVLP pneumatic spray guns is 900-25,000 rubles.

Top 9. Garage 162А2 1.5 8085080

Rating (2022): 4.25
Accounted for 6 reviews from resources: AllTools
Best price

The airbrush is cheaper than other LVLP models by 10-70%.

  • Country: Russia (produced in China)
  • Average cost: 960 rubles.
  • Maximum pressure: 6 atm
  • Air consumption: up to 280 l/min
  • Material consumption: 110-230 ml/min

The pneumatic model LVLP has a light alloy metal body and a 0.5 ml top bottle. The manufacturer has provided the ability to adjust the air supply from 90 to 280 liters per minute, adjust the paint flow from 110 to 230 ml / min and control the shape of the torch. There is a loop in the upper part of the body for hanging the pneumatic tool. Initially, the spray gun is equipped with a spray head with a nozzle of 1.5 mm. The rough matte surface does not allow the gun to slide in the hands, but it is difficult to wash off dried paint. Optimum uniform coverage is obtained by holding the sprayer at a distance of 11-25 cm from the surface. In general, this is the most budgetary LVLP model for a garage or home, so that you can slowly paint a bicycle frame, a gate, a fence or a moped fender.The spray gun has a large resource, but it significantly loses to competitors in terms of transfer quality, so for more responsible products, take a closer look at the models below.

Pros and cons
  • Doesn't slip in hands
  • Affordable price
  • Loop on body
  • Adjustable paint spot shape
  • Difficult to remove paint
  • Slippery Regulators
  • Threaded connection

Top 8. ECO SG-3000L

Rating (2022): 4.36
Wide range of spot widths

With a pneumatic spray gun, the width of the torch is adjusted from 20 to 28 cm, so fewer passes over a large area are required.

  • Country: Italy (made in China)
  • Average cost: 2500 rubles.
  • Maximum pressure: 1.5 atm
  • Air consumption: up to 175 l/min
  • Material consumption: 125-175 ml/min

The pneumatic LVLP spray gun from the Italian brand operates at a low inlet pressure of 1.5 bar, so it does not need a powerful compressor. Adjustment of a form of a torch in the range from 20 to 28 cm one of the widest among analogues. Initially, the model is equipped with a 1.4 mm nozzle, which can later be replaced with a smaller or larger one. In the reviews, the owners share that with pressure drops in the system, this does not affect the gun - it continues to transfer the material well and evenly distributes it over the surface. Due to the relief cuts on the handle, the pneumatic tool does not slip in the hands. But some come across models that slightly poison the air. The adjustment is not fast - you have to fight spitting for a long time. The air hose is connected through a threaded fitting, so you need a wrench at hand.

Pros and cons
  • Wide spot size settings
  • Does not respond to pressure drops
  • Good material transfer
  • Doesn't slip in hands
  • Some poison the air
  • Difficult to adjust early
  • Threaded connection on the fitting

Top 7. PATRIOT Lvlp 1.2A

Rating (2022): 4.48
Accounted for 12 reviews from resources: Citilink, Yandex.Market
Nice design

The spray gun not only works well, but also pleases the owners with its beautiful look with orange accents.

  • Country: USA (made in China)
  • Average cost: 3090 rubles.
  • Maximum pressure: 3 atm
  • Air consumption: up to 150 l/min
  • Material consumption: 130-150 ml/min

The spray gun is cast from aluminum alloy, and the paint feed mechanism is made from alloy steel and bronze. The model is solidly assembled, without backlash. The 1.2 mm nozzle sprays up to 20 cm wide spray pattern. The smooth body is easy to clean after dried paint. The plastic tank with a volume of 0.6 liters closes tightly, so the spray gun can be tilted towards itself when painting the ceilings - nothing will spill. You can connect the high pressure hose or, conversely, disconnect it from the gun in 1 second thanks to the rapid connection. When the pneumatic professional tool is not in use, it is convenient to hang it on a nail using a factory hook. The long limiter on the handle will not allow you to pinch your fingers at the moment you pull the trigger. The kit comes with a key for disassembly and a brush. From the reviews it can be seen that the LVLP spray gun has an even torch with the ability to adjust the feed in a strip or a circle (spot).

Pros and cons
  • beautiful appearance
  • Easily wipe dried paint off the case
  • Sealed tank
  • Long stopper on the handle
  • For some heavy, 850 g

Top 6. Metabo FSP 600

Rating (2022): 4.52
For water-dispersion paint

The spray gun does not clog when working with thick coloring compositions containing PVA, latex or acrylic.

  • Country: Germany (produced in China)
  • Average cost: 7962 rubles.
  • Maximum pressure: 5 atm
  • Air consumption: up to 260 l/min
  • Material consumption: 120-170 ml/min

The Metabo LVLP spray gun is versatile and suitable for primers, putties, fillers, one-component paints, clear varnishes. It can be used even with water-based paints, while the "younger" models in the manufacturer's line are not designed for this. Moreover, the 1.5 mm nozzle in the kit is applicable to all substances, except putty. In the latter case, the manufacturer recommends installing a nozzle with an inner diameter of 2.0 mm. The model differs in high-quality assembly and convenient form factor. There is a loop for storing pneumatic tools in a suspended state. The lambs allow you to smoothly adjust the flow of paint and pressure, but it is not convenient for everyone to take them on. Users also share in the reviews that when holding the gun evenly, the torch is not horizontal. The manufacturer on the official website replies that this is normal, although not familiar.

Pros and cons
  • Quality build
  • Hanging loop
  • Suitable for thick paints
  • Universal nozzle 1.5 mm
  • Not a horizontal torch
  • Inconvenient pressure limiter

Top 5. HUBERTH LVLP R500, 1.7

Rating (2022): 4.53
Accounted for 111 reviews from resources: 24review, Ozon, Yandex.Market
Best Air Saving

In a minute, the spray gun spends from 85 to 110 liters of air, when other models consume 140-200 liters.

  • Country: China
  • Average cost: 3977 rubles.
  • Maximum pressure: 3.5 atm
  • Air consumption: up to 110 l/min
  • Material consumption: 120-170 ml/min

The pneumatic spray gun from the Chinese brand HUBERTH comes with a 1.7mm brass nozzle. Additionally, you can choose a nozzle of 1.3 or 1.5 mm. There are ready-made models on sale with such heads. The minimum compressed air consumption of 85 l/min makes it the best and most versatile in terms of cooperation with any compressors. At the same time, a wide torch of 28 cm allows you to perform fewer passes, which speeds up work on a large area. The body of the gun is covered with an additional protective layer, which ensures easy removal of paint after work. The needle is made of stainless steel, so it does not wear out for a long time and is resistant to corrosion. Judging by the reviews, the spray gun creates a small amount of fog and is quite suitable for professional use. Pneumatic tools are actively used in carpentry and auto-painting workshops. Of the minuses, a short-lived red coating is distinguished, a leaky trigger rod in single copies.

Pros and cons
  • Easy to wash off paint
  • Economical air consumption
  • wide torch
  • Quality components
  • Peeling paint on body
  • Some let air through under the trigger

Top 4. PATRIOT LV 162A

Rating (2022): 4.60
Accounted for 47 reviews from resources: Ozon, Yandex.Market, Citilink, AllTools
High performance

In a minute, the spray gun is able to transfer up to 200 ml of paint to the surface.

  • Country: USA (made in China)
  • Average cost: 1070 rubles.
  • Maximum pressure: 3 atm
  • Air consumption: up to 141 l/min
  • Material consumption: 150-200 ml/min

Household pneumatic paint sprayer LVLP is designed for applying coatings of different viscosities - from thin enamel to thick liquid putties.Supplied initially with a 1.5 mm nozzle, providing up to 200 ml of material per minute, which is very different from other models with LVLP technology. In terms of speed, it is not inferior to more efficient HVLPs, but consumes less air. The brass nozzle width regulator, located near the head itself, allows you to conveniently adjust the transfer spot for painting narrow and wide surfaces in the range from 12 to 22 cm. Unlike other models, the material flow regulator is placed on the right side. This helps a novice not get confused in the settings, but a little inconvenient for adjustments in the process. Judging by the reviews, the paint falls exactly on both wooden and metal surfaces, so the spray gun is suitable for painting furniture and car body parts.

Pros and cons
  • High performance
  • Convenient lamb for adjusting the width of the torch
  • Warranty 2 years
  • Spreads paint evenly
  • Matte surface is difficult to wash off paint

Top 3. Stels AG 970 LVLP 57369

Rating (2022): 4.72
For hard to reach places

The spray gun tank has a volume of 120 ml, which is 3-4 times less than analogues, due to which the view is not blocked and it is easier to manipulate in narrow niches.

Economical paint consumption

The supply of material can be adjusted within the range of 70-100 ml/min, while other models have a minimum parameter starting from 120-140 ml/min.

  • Country: Germany (produced in China)
  • Average cost: 3901 rubles.
  • Maximum pressure: 3.5 atm
  • Air consumption: up to 168 l/min
  • Material consumption: 70-100 ml/min

Professional spray gun with 0.8 mm LVLP nozzle is made with brass components, so it maintains excellent spray quality for a long time. Suitable for varnishes and paints.There is a cleaning brush included. The embossed surface and wide stopper on the handle provide a secure grip. Only due to its small size in large hands it is not very convenient to hold it. You can store the tool in an upright position by hanging it on a hook. The thick plastic 120 ml tank withstands the rigors of the paint shop. Its small shape allows easy access to hard-to-reach areas, such as in the luggage compartment or engine compartment when painting a car. In the reviews, the pneumatic spray gun is praised for its reliable operation and high-quality assembly. Atomized material does not become mist. But taking into account the 0.8 mm nozzle, the paint needs to be strongly diluted - almost to the state of water. Otherwise, with increased viscosity, the internal channels become clogged and the head begins to throw lumps.

Pros and cons
  • Brass accessories
  • light weight
  • Economical varnish consumption
  • Convenient in limited space
  • Only for highly liquid paint
  • Uncomfortable for large hands
  • Need to pour paint into the tank more often

Top 2. JONNESWAY JA-LVLP-25G

Rating (2022): 4.80
Wide range of nozzles

The airbrush supports work with nozzles with a diameter of 1.0 to 1.8 mm.

  • Country: Taiwan
  • Average cost: 25320 rubles.
  • Maximum pressure: 2 atm
  • Air consumption: up to 283 l/min
  • Material consumption: 140-190 ml/min

The LVLP spray gun for professional use is very light - 530 g, so it puts less strain on the hand during prolonged use. Consumables are poured into the upper 600 ml nylon container, and the supply is adjusted by the first valve immediately above the handle. All structural elements are very durable and will survive more than one fall.Pneumatic spray gun does not require high inlet pressure - the limit is 2 atm, which will allow you to get by with a low-power compressor. A model with a nozzle of 1.4 mm is supplied, but for this spray gun the manufacturer produces nozzles of 1.0/1.2/1.3/1.5/1.6 and 1.8 mm, which allows you to choose the head equipment for any task. Not all competitors have such a variety of attachments. The official website directly states that the spray gun is recommended for painting car bodies and furniture production.

Pros and cons
  • Light weight
  • Rugged housing
  • Wide range of nozzles
  • Convenient one-hand operation
  • Much more expensive than competitors

Top 1. Stels AG 950 LVLP 57367

Rating (2022): 4.91
Accounted for 40 reviews from resources: DNS-Shop, Yandex.Market, 24review
Soft application

The airbrush does not spit, does not create fog, splashes do not bounce off the surface.

  • Country: Germany (produced in China)
  • Average cost: 4620 rubles.
  • Maximum pressure: 3.5 atm
  • Air consumption: up to 110 l/min
  • Material consumption: 140-190 ml/min

Professional pneumatic spray gun is cast from silumin and has a chrome finish. Thanks to this, the body is easily washed off the paint at the end of the working day. The gun is comfortable to hold in your hands, and for storage you can hang it on a nail or cable with a hook at the top. The paint flow regulator allows you to adjust the flow of material in the range of 140-190 ml, which is convenient for creating thin and thick layers. The spray gun is supplied with a 1.5 mm nozzle. The kit includes a brush, a wrench for disassembly and a brush. The LVLP spray gun is suitable for all types of paints and varnishes.Masters in the reviews note the soft application of the material. If you need to speed up the process, it is recommended to set the pressure to 4.5 atm. But the owners advise not to lose the fitting for connecting the hose, since it has a thread pitch of 1 mm with a diameter of 10.75 mm - it is impossible to find an analogue among domestic parameters.

Pros and cons
  • Spreads paint gently
  • Comfortable to hold in hand
  • Low air consumption
  • Housing is easy to clean after use
  • Quick coupling with American thread
Which brand of LVLP spray guns is the best?
Vote!
Total voted: 0
0 Liked the article?
Attention! The above information is not a buying guide. For any advice, you should contact the experts!

Add a comment

Electronics

Construction

Ratings