20 best spray guns

The electric spray gun is endowed with a power of 400 W and a tank with a volume of 800 ml. The device sprays using the new HVLP technology, when a large volume of paint is supplied at low pressure. This reduces the likelihood of fog formation, promotes better transfer of the substance to the surface. The maximum permitted viscosity of the material is 60 dynes/cm², so emulsion paint, enamel, varnish, primer, oil, solvent, garden disinfectants can be poured into the container. With a 2.6 mm nozzle, the maximum material flow is 0.8 l / min, but this can be reduced by settings. The weight of the spray gun is 1.7 kg, which does not put much pressure on the hand.

In the reviews, buyers note the quality assembly and long service life. For some, the spray gun works flawlessly for 4-5 years with regular use, which is not bad for a household appliance. Of course, they cannot paint a car, but the spray gun works well when applying a primer to pipes, baseboards, radiators and other narrow surfaces. The owners note the uniform application and the absence of streaks. Washing it after work is also not difficult. Only when disassembling, make sure not to lose the sealing ring, which often falls off.

A powerful household spray gun with a 550 W electric motor and HVLP technology provides a uniform supply of primer and paint to the surface. The kit includes a standard 800 ml tank and 3 spray nozzles for different needs. The airbrush differs in convenient smooth adjustment of an expense. When other models require you to turn the limiter under the start key, here it is enough to turn the large lamb next to the nozzle. This can be done right at work.

In the reviews, buyers praise the product for its high-quality plastic, soft power cord, and the absence of vibrations on the case. The light weight of 1.5 kg is comfortable even for extended use. The nozzle and needle are made of metal, so they will last a long time if everything is thoroughly washed after work. Some even tried to paint car parts with it - if you get used to it, it turns out well. The spray is quite thick, which means that in some cases a second coat will not be needed. Of the minuses - the material feed button is pressed tightly.

A small airbrush of Chinese origin for the home, the main feature of which is the rather high power of the built-in electric engine, combined with the low dead weight of the structure. Consuming 280 W from the mains Bort BFP-280 works quite economically, spraying no more than 0.2 liters of liquid every minute. The reason for this is simple: opening the nozzle allows you to process only small areas in order to increase the quality of the applied layer.

In particular, the user can change the spraying mode himself: from vertical and horizontal painting to concentric (circular), suitable in case of using a spray gun in the form of garden tools. In the general case, Bort BFP-280 allows you to work with materials of various viscosities, up to thick varnishes and enamels. As for the rest of the characteristics, one of them, perhaps, can be identified as a reservoir for liquid with a volume of 700 milliliters, located at the bottom of the “gun”. As a result, this model seems to be a good working tool that has received great support from domestic consumers.

Electric spray gun designed to perform work mainly in small areas. Despite the company's claimed "fast spray and work speed," the 110-watt motor struggles to produce 300 milliliters per minute. And in general, the engine is not the most outstanding part of this tool. The case is another matter: the entire “stuffing” is packed in lightweight impact-resistant plastic, which can easily withstand an awkward fall onto a hard surface from a height of human growth. The handle is made with non-slip Extra Grip pads that provide a good and comfortable grip. It is worth noting the presence of a flexible extension cord in the kit, which is used for painting hard-to-reach places.

From the reviews it can be seen that the first setting is rather extended in time - you need to choose the viscosity, choose the optimal flow rate. The nozzle at the sale is simply baited on the thread, therefore it is absolutely not adjusted. If the viscosity is chosen incorrectly, the device rumbles strongly, and instead of a uniform feed, it spits. But when everything is set up, working with an airbrush is a pleasure.

Bison KPE-350 is a model without frills, but perfectly coping with its direct duties. It allows you to apply any kind of paint and varnish coatings with a viscosity of up to 60 DIN, evenly and without overspending. Unlike competing models, it is equipped with a 350 W motor - this ensures good traction and uninterrupted operation throughout the entire painting cycle, regardless of the total duration of the process.The HVLP system is responsible for the economy of spraying the contents, expressed by the presence of a large spray head and low pumping pressure. There is one more feature: a jet of paint can be applied both vertically and horizontally - it depends on the position of the rotary nozzle, which was made as such to ensure ease of use of the spray gun.

The owners in the reviews are satisfied with the light weight and comfortable grip of the spray gun. With its help, it turns out to color a decorative stone well, and some use it for confectionery purposes to create a “red velvet” or “velor” coating. The household tool works quite quietly. But some complain about the low throughput of the nozzle - it is necessary to dilute the paint heavily, which is why it is necessary to apply 2-3 layers to create a uniform coating.

The electric spray gun has a power of 900 W and promotes paint spraying up to 1.8 l / min with a pressure of 227 bar. The kit comes with a 15 m long hose, but it can be replaced with a longer one (up to 30 m) to rearrange the station less often.The airbrush is notable for its quiet operation with a volume level of 73.9 dB, while for analogues this parameter is 85-95 dB. This characteristic reduces the load on the operator's hearing organs, at the end of the day the head will not ache, and the neighbors nearby will complain less if they paint all day.

The front panel provides a convenient interface for setting and monitoring pressure. But the build quality leaves much to be desired - for example, the pressure gauge can be turned upside down. The spray gun is equipped with a 45 cm rod for suction of material from the very bottom of the tank. Judging by the reviews, it sprays well with latex and acrylic paints, alkyd varnishes, anti-corrosion compounds. You can carry it in place by the top handle, but it does not have a rubber lining, so it slides in your hands.

Airless network spray gun WAGNER Control Pro 350 M Airless is a high-quality option for equipping production, as well as for providing professional painting services in forced mode. With a power of 600 W, the device is able to generate compressed air flows with a pressure of up to 110 bar, as well as regulate the flow rate of the sprayed liquid up to 1.5 liters per minute. In this case, the average application speed, indicated by the manufacturer, is 7.5 square meters every minute.

Control Pro 350 M Airless, like most models in the Wagner line, has a 15-meter connecting hose, which allows you to produce high-quality and, most importantly, fast finishing of spacious rooms (when installed in their central part).The only tangible minus of the unit is a very high noise level (you should not expect a quiet “whisper” from a supercharger of such a high pressure), reaching up to 100 dB. Therefore, as a measure of hearing protection, when working with this spray gun, we recommend using construction headphones.

Professional spray gun with an electric remote pump creates a pressure of 207 bar and is able to work with a paint flow rate of 1.1 l / min. It stands out with a small power consumption of 650 W compared to competitors. The engine is based on a tubular frame, and a rubberized handle is provided for rearrangement in place. Unlike the "older brothers", the compact spray gun does not have a pressure gauge, but there is a valve for smooth adjustment of the air flow. The high pressure hose is protected by a steel spring acting as reinforcement.

The model is quite suitable for painting fenders, sills, car doors in garage conditions. Given the cost of the device, it will pay off in full with such work. A set of stuffing box seals in the kit allows you to do minor repairs in the future with your own hands. In the reviews, the spray gun is praised for its endurance, compactness and affordability. But for continuous operation, lubrication is required, otherwise the moving parts will wear out quickly.

The ASPRO-1800 electric spray gun is a controversial but popular model among professionals. The main problem of this atomizer is a very powerful stuffing, but its useless debugging.The 900 W motor delivers 1.8 liters of paint material per minute. For an uninitiated person, such a value will seem very decent, however, with such characteristics, a higher efficiency value can be squeezed out.

Structurally ASPRO-1800 is very convenient. Its body is fixed on a frame, which, if necessary, can be moved by simple dragging. Also included is a 15m extension hose, indispensable when painting ceilings or large spaces. The reviews note the convenience of monitoring pressure using the built-in pressure gauge. Among professionals, he is considered one of the most unpretentious. It is sold with a pistol. Of the minuses: the power cord is only 3 m, so the pump itself will have to be placed next to the outlet or use an extension cord. Painting walls and ceilings with him goes “with a bang”, and some coped with painting body work.

Airless electric paint sprayer Caliber ABR-850 is a real "tank" in the production of painting work. The device is intended for use exclusively for professional purposes and all the parameters are another proof of this. The overall painting unit has a single-phase collector engine with a power of 850 watts. It delivers a fantastic throughput of 2.1 liters of paint material per minute. When spraying, a very high pressure is created in the system, about 227 bar, so painting can be done by moving the hose nozzle 40-50 centimeters from the surface.Despite the "mad" performance, it is very economical - when passing through the nozzle, the liquid is crushed, taking most of the surface under the color.

With such characteristics, a professional spray gun for painting a car or at home is cheaper than most analogues. The product is distinguished by high-quality assembly and several levels of security. The gun is comfortable and durable. But the hose is not soft enough. Of the problems - over time, paint consumption may increase. This is due to valve sticking. I need a flush to put everything back in place.

The spray gun is designed for use together with water-chalk solutions for finishing work or processing tree trunks from insects. If you need to whitewash the ceiling in an old house without wallpaper, this is the best option to help save time. With a power of 800 W, even distribution is ensured. A tank with a capacity of 1 liter is enough for a long time to work without stopping. The 1.5 mm nozzle contributes to economical fluid consumption. The remote pump is equipped with a belt, so it can be hung on the shoulder and work under the very ceiling.

This is one of the most compact and lightweight devices with a remote electric motor. The hoses are securely fixed on the nozzles thanks to special grooves with entries, which prevents spontaneous jumping off. But there may be air leaks on the joints themselves, so some wind up the sealing material. Judging by the reviews, the spray gun does its job well, and problems begin only if you try to pour paint into it. If you purchase a product only for whitewashing walls, pillars and tree trunks, it will justify itself.

The model from the German brand has a power of 460 W and an enlarged paint tank of 1300 ml. The tool contributes to the quick performance of the work - the speed of applying the substance is 1.5 m² per minute. The feed system is not afraid of thick paints - the maximum viscosity is allowed up to 170 dynes / sec / cm². The spray gun is equipped with a nozzle with a Wall Extra I-Spray nozzle. This is a special development of the company, which contributes to a wider torch while keeping at a distance of 20-30 cm from the surface. This reduces the number of vertical passes, saves time.

The electric model, judging by the reviews, is distinguished by a convenient trigger, a handle rubberized on both sides, and a durable paint tank. The needle valve lasts a long time. When painting walls, the material lays down evenly and without streaks. The nozzle excels with good atomization and no transitions are visible when applying stripes. But not all owners like to attach the hose to the block with the motor.The owners also advise to work without "smoke breaks", otherwise the paint flows into the valve, dries up and prevents it from closing tightly later.

The Black + Decker air spray gun is a rather bulky unit, the main feature of which lies in the large volume of the liquid tank - 1.2 liters. Thanks to such a serious tank, combined with good technical performance (power 450 W, flow rate around 0.5 liters per minute) and a decent hose length (6 meters), all conditions are created for continuous painting work in the repaired premises. Actually, the voiced set is the most valuable and often mentioned in user reviews.

Expert opinion is also on the side of the quality factor of the HVLP400, however, they pay attention to small details, leaving obvious prerequisites for user ratings. In particular, the material consumption rate indicator mounted on the body of the spray gun deserves a portion of praise. In addition to it, the spraying mechanism itself was also noted in a similar way, which allows you to change the track from circular to vertical and horizontal. This tool does not allow you to paint cars, but it does a good job of decorating walls and furniture.

The budget version of the spray gun for high-quality painting work, featuring a large material flow adjustment step and high power of the built-in electric motor. 750 W is more than enough to ensure fast painting of walls and other ceilings, accompanied by a minute-by-minute ejection of sprayed liquid in a volume of up to 800 milliliters. At the same time, it is important that the viscosity of the material does not exceed 100 dynes/cm² - otherwise clogging of the nozzle may occur.

Among other things, it is worth noting the ergonomic conditions of the ZUBR KPE-750. Largely due to the large mass of the structure without sprayed material (4.8 kilograms), the manufacturer managed to reduce vibrations to a negligible threshold of 0.1 m/s². However, one can make claims on the level of emitted noise, which exceeds the threshold of 90 dB, however, there are much more “loud” installations in the segment.

Of course, the decoration of the rating of the best, the positive moments in which relate to the highest speed of applying consumables to the surface to be treated. Like its competitors in the category, the BOSCH PFS 5000 E is an electric spray gun for processing surfaces such as walls and furniture, but cannot be used as a car painting tool. Its power is almost 1200 W, which, when the flow rate is regulated in a fairly narrow range (0.5 l / m), allows you to process up to 3 square meters of the surface with glaze, enamel, stain, varnish and other facing materials.

Having taken care of the technical side of the model, Bosch engineers could not ignore the much more specific area of ​​​​ergonomic parameters. Despite the installation of a powerful engine, the noise of the PFS 5000 E does not exceed 95 dB during operation, which is a kind of achievement on the scale of the segment. Unfortunately, this focus did not work with the vibration level: 2.5 m/s² even despite almost 5 kilograms of weight - much more than the normalized limits.

Pneumatic airbrush works with a pressure of 3-4.5 bar, spraying paint and varnishes through a nozzle with a diameter of 1.5 mm. Thanks to the rapid fitting, the gun can be easily disconnected or attached to the hose. The torch width adjuster allows you to adjust the parameter from 12 to 20 cm. The model stands out with a 750 ml metal container, which is resistant to shock. Stainless steel tolerates contact with dyes and solvents well, therefore it lasts a long time, unlike plastic containers.

Many owners like the price of a pneumatic spray gun, which is in the budget segment. In operation, the model is very practical. The lower location of the barrel does not block the view when working in inconvenient places. There is no spitting when spraying, the adjustment is accurate and simple. Among the shortcomings, buyers note a weak fixation of the lid. If you touch it, you can accidentally open the container and spill the paint. The sprayer also has a large air flow, so you will need either a powerful compressor or a large receiver.

A budget pneumatic spray gun works with a pressure of 3-4 atm, consuming up to 230 liters of air per minute. An aluminum tank with a volume of 1 l is attached through the top mount. The shape of the trigger allows you to press it with one or two fingers. The body is cast entirely from metal, so the construction weighs 750 g. But nothing will happen to it if it falls. The tool disassembles for washing quite easily. The manufacturer recommends it for painting cars and finishing walls and ceilings.

Buyers like the pneumatic spray gun with a rich bundle for a budget price. Three bronze nozzles with a diameter of 1.2 / 1.5 / 1.8 mm are supplied with the gun, as well as clamping nuts for them. There are three stem needles for each atomizer. This allows the sprayer to be fine-tuned for thin or thick application. But you only need to hold it vertically - at the slightest tilt, the lid falls off. But there are no streaks when spraying, the nozzles are durable, you don’t need to buy anything else.

Pneumatic sprayer, made in the best traditions of classic painting tools. Despite the low price Patriot LV 500 looks very impressive. And it's not just about appearance. All regulatory elements, trigger and hose connection are made of high quality corrosion-resistant material. The gun fits perfectly on the hand, does not slip and does not load the brush. The only serious drawback of the spray gun is the paint tank. From a slight impact or work at light negative temperatures, the plastic is embrittled, which leads to a violation of its tightness - the appearance of chips, cracks or complete destruction. Such a “sore” is treated by the notorious replacement of the tank with a suitable model, and this is an additional cost.

The airbrush works with pressure up to 1.5 bar, so it does not need a powerful compressor - an installation with a flow rate of 175 l / min is enough. With a nozzle diameter of 1.5 mm, the spray width reaches 28 cm, which contributes to increased productivity. Owners in the reviews note the convenience of adjusting the width of the jet and the shape of the torch, as well as the low weight of the gun.

The pneumatic spray gun is made of metal, but the tank with the top connection is molded from plastic. The kit includes a nozzle with a throughput diameter of 1.4 mm. High pressure is not required for performance - 3.5 bar is enough. With an air flow of 198 l/min, material transfer can be set from 100 to 190 ml per minute.In this case, 85% of the substance will fall on the painted surface, and not remain in space in the form of fog. The gun is reliable and convenient, and the manufacturer issues a 2-year warranty on it.

The reviews highlight the lightness of the spray gun and the large selection of interchangeable nozzles that this company has. True, they come at an additional cost. Owners like the soft fan adjustment, the low pressure required and the economical paint consumption. Of the minuses - buyers consider the 600 ml capacity too small. Some are missing the key for disassembly and flushing in the kit. The size of the gun is slightly larger than analogues, although it is not visible in the photo. Due to this, the model is convenient for people with large hands and vice versa too bulky for small hands.

Pneumatic spray gun is designed for pressure up to 3 bar and works on HVLP technology. A way of accession of a tank ― top. The container is made of plastic and holds 600 ml of liquid. Initially, the pistol has a nozzle with a diameter of 1.4 mm, but it can be changed to 1.7 mm. The spray head made of brass does not wear out for a long time, so there will be no spitting. The gun immediately attracts attention with its blue color. The anodized aluminum body can be easily cleaned with a solvent, even from dried traces of paint, without losing its appearance during daily use.

The spray gun is equipped with a key for disassembly and a brush for cleaning channels from paint. The quality, of course, loses to Sata, but at this price, the assembly and work are decent. The masters in the reviews report that the gun “throws” the paint on the car body perfectly.When applying white mother-of-pearl to the spoiler, everything falls evenly, the transitions are well smoothed out. The model is optimal both for full coloring of the car body, and touch-ups of bumpers, chips on doors and thresholds.