10 best spray guns for painting walls and ceilings

The budget spray gun for painting ceilings with walls has a lower tank with a volume of 750 ml. The metal container does not block the view when painting the ceiling surface, but the paint is not completely developed due to the gun tilt. The width of spraying with a torch is adjustable from 12 to 20 cm. There is no spitting during application. Some tried to use a spray gun not only with water-based paint, but also with thick nitro enamels and fire-resistant primers - it turned out well. In the reviews, the owners advise tightening the lid more tightly, otherwise it may spontaneously unwind due to a weak fixation lock. The matte surface of the gun is difficult to remove from dried paint, so the tool should be cleaned immediately after use.

The spray gun for painting walls and ceilings is cast from aluminum alloy. The tank with the lower location is also metal and withstands harsh operating conditions well. It easily attaches to the gun and does not wave when working on ceilings. True, the connecting nut and tube are made of ordinary steel, therefore they gradually rust. It can be seen from the reviews that the 750 ml tank provides longer work when painting walls and ceilings than the 600 ml versions. The manufacturer uses reliable gaskets in the design, which contributes to tightness with a strong inclination of the gun towards itself. There are no air leaks in the system. But the trigger is too close to the tank, so the knuckles will rest. If a low-power compressor is available, the air supply can be adjusted from 75 l/min. The maximum air flow adjustment limit is 230 l/min for best performance.

The pneumatic model works with a 1.4 mm nozzle, and if necessary, can change to 1.7 mm. The brass nozzle lasts a long time and ensures even distribution of water-based paint. There are no spitting, all adjustments are smooth and understandable even for a beginner. The thick plastic of the 600 ml tank is well tolerated by accidental drops and bumps. In the reviews, buyers note the convenient holding of the spray gun in their hands, if you press the trigger with two fingers. At the same time, the material flow regulators and the shape of the torch can be reached with the thumb of the right hand. After work, washing the body of the gun from dried marks is not a problem. The manufacturer recommends using an airbrush for painting walls and ceilings, as well as in car paint shops. Suitable for professional use.

A pneumatic spray gun is well suited for painting ceilings and walls, as it reduces the amount of spatter. The shape of the handle is very comfortable for long work. You can adjust the flow rate of water-based paint from 140 to 190 ml / min. The model's light weight of 594 g makes it easier to hold the gun above your head when painting a 3-3.5 m high ceiling.The kit comes with a wrench for work, a brush and a brush. Experienced users in the reviews share that the airbrush fully justifies its price with high quality. The trigger is pressed moderately tight, the finger is comfortable with a long hold. The embossed surface prevents sweaty hands from speaking. But the fitting for connecting the high pressure hose has a non-standard thread, so it is difficult to find an analogue.

Pneumatic spray gun for working with water-based paint has a top tank of 0.6 liters with a hermetically screwed lid. For full operation, a compressor is required that delivers up to 198 l / min. The kit comes with a 1.4 mm nozzle, but the same manufacturer offers different nozzles, including 2.5 mm for very thick formulations. The pass hole is chiselled, which ensures the exact shape of the paint spot. Head material ― the brass promoting long service life. In the reviews, users note the convenient smooth adjustment of the shape of the torch and the uniform application of water-based paint on the ceiling and walls.The pistol is heavier than analogues (weight is about 1 kg), because it is cast from an alloy, not pure aluminum. Holding it over your head for a long time is not very convenient, but when falling from a height, it does not break.

The spray gun is suitable for water-based paints with a viscosity up to 100 dynes/cm². The compressor is supplied in a box with wheels and a retractable handle for easy transportation of the unit on site. The long hose is wound inside, so it does not unwind spontaneously during transportation.Disassembly in one step makes it easy to clean the nozzle after use. But the unit weighs 4.8 kg, and also takes up more space than analogues. Flow control is adjustable from a minimum to 0.8 l/min. In the reviews, the owners are satisfied with the ease of use and low vibration. The torch can be adjusted to a vertical or horizontal stripe, a round spot. With a long hose, painting the ceiling and walls does not require moving the base with the compressor across the floor.

Electric spray gun for water-based paints with a viscosity of 60 dyn⋅sec/cm² has a comfortable rubberized handle and a 2 m power cable. With a power of 400 W, the gun produces up to 800 ml of material per minute. Feed adjustment is provided for fine tuning. The set includes two nozzles 1.8 and 2.6 mm for different paints, antiseptics, primers, oils and varnishes. From the reviews it can be seen that the spray gun is easy to clean, just disassembled and assembled. Beginners have no problems with it. When painting walls, the container is emptied by 100%, and when processing ceilings - by 60%.An electric sprayer is convenient on vertical wide and narrow surfaces, for example, lattice walls of arbors and outdoor terraces. But since the nozzle and needle are made of plastic, the device is not suitable for frequent use.

The chip of the electric spray gun is the Wall Extra I-Spray nozzle, specially designed for the highest quality painting of walls. The nozzle effectively sprays water emulsion without dilution and does not create a gas cloud. The large tank reduces the number of stops during work. The remote pump can be hung on the shoulder using the supplied strap. Painting when the base is on the table will work only with low ceilings up to 2.5 m, because the length of the hose is only 1.8 m. The total weight of the kit is 2 kg, so it is convenient for both men and women to work with it. The kit comes with a spare gasket for the nozzle - at first you can do minor repairs yourself. It is comfortable to hold the spray gun due to two rubber pads on the handle.The unit is suitable for very thick water-based paint with a viscosity up to 170 dynes/cm².

The electric spray gun is equipped with two tanks of 1 liter each, which contributes to long-term work. Increased power provides the best performance among peers. The long hose is conveniently wound around the motor housing. The ConstantFeed function is specifically designed for painting ceiling surfaces and ensures uniform application. Includes 3 nozzles of different diameters. So that the user can quickly take the right one, the manufacturer painted them in black, gray and white. The airbrush supports work with enamels, azure and water-based paints. In the reviews, buyers note the uniform supply of material not walls and ceiling, the absence of large drops. For wooden sheathing, one layer is sufficient at the correct density. But the pump is buzzing during operation with a volume level of 95 dB.

The electric spray gun has a large 900 ml lower tank and a remote pump. The latter has a stand for a pistol. The set includes two nozzles with a diameter of 2 and 3 mm made of durable plastic. All connections are sealed. The remote pump is connected to the sprayer with a 1.8 m hose - if you install the base on the table, it will be enough to paint a low ceiling of 2.5 m so as not to hold the pump in your hands. The material supply can be adjusted up to a maximum of 1 l/min. Owners report in reviews that the deployed angle of the gun handle provides a comfortable hold for the spray gun when painting ceilings and walls. The hand does not get tired during long-term use. With a viscosity of 60 dyn⋅sec/cm², nothing flows over vertical surfaces, but the electric tool is also designed for thicker compositions - up to 100 dyn⋅sec/cm².