Ormatek or Ascona - which mattress company is better in 2021?

Askona and Ormatek offer a wide range of springless mattresses with natural and artificial fillings: coconut, polyurethane foam, artificial and natural latex, holofiber, etc. Such models consist of one or more layers that form different degrees of rigidity.

The Basic Flex Air and Flex Standard models are in the same price segment and are quite similar in properties. They are both single layer, but have different filler. Ormatec offers a high rigidity construction in Ormafoam with a porous structure. This material perfectly supports the spine and provides a gentle stretching effect for maximum relaxation and more comfortable sleep. It is well breathable and does not prevent the evaporation of moisture. Withstands loads up to 120 kg. Ascona uses Orto Foam as a filler, which is also designed for heavy loads and provides optimal support for the body. Hardness is average, but some buyers note that the surface is quite soft. Here, of course, everything is subjective, but it is worth keeping this in mind. Also, the product, although slightly, is inferior to the competitor in terms of "endurance" - the maximum allowable load is 110 kg.

For cover Ormatek used Well knitwear and hypoallergenic filler. The surface is quilted, which adds softness and volume to the design.However, Ascona excelled here for the better and equipped a fairly budget model with the best jacquard upholstery. This material consists of cotton and polyester, is breathable, has high strength and elasticity, so experts consider it the best option. As a filler, as well as in Ormatek, a synthetic winterizer is used. A big plus that speaks about the quality of mattresses from both manufacturers is that they are treated with bactericidal impregnations and are suitable for allergy sufferers.

Unlike products with springs, springless mattresses do not creak, do not spring, weigh less and are ideal for use on a folding sofa or bed. In addition, they are easier to transport from place to place, since the absence of springs allows you to roll the mattress into a compact roll. The convenience of transportation is also affected by the weight products. So if you are choosing an option for giving and planning to take the mattress to the apartment for the winter, then you should pay attention to lighter models. In this regard, Ascona is indisputably the leader - Basic Flex Air weighs only 6.69 kg. For comparison, the weight of the Flex Standard is 9 kg. The official warranty for both products is 1.5 years. But Ormatek extends its period to 5 years when purchased and operated with a branded protective case.

As can be seen from the table, the models do not differ much in terms of rating.But Ormatek with the Flex Standart mattress takes the lead, and deservedly so. This is an excellent rigidity option with high-quality filler. In addition, the manufacturer offers a durable removable cover that increases the wear resistance of the entire product and allows you to get an official 5-year warranty. However, Basic Flex Air also has a lot of advantages. It is more convenient to use - it folds into a compact roll, plus it is light enough and easy to carry from place to place. At the same time, the cost is lower than that of a competitor.

In such designs, the springs are intertwined with each other in a certain order and form a single block - a bonnel. They are very elastic, durable, and most importantly, they are relatively cheaper than products with independent springs. The ideal solution for those who prefer to sleep on a flat and firm surface. Quality and cost largely depend on number of springs per square meter. The more of them, the better. If we compare models, then Ascona is the leader in this respect - there are 118 springs / m2. Ormatek is inferior - it has only 108. In any case, a big plus is that you don’t have to worry about creaking - the manufacturers made sure that the springs do not rub against each other thanks to the special clip technology.

Both firms add to the bonnel additional layers for comfort: polyurethane foam and felt - everything so that even an inexpensive mattress lasts as long as possible.However, the quality of the filler is different, which directly affected the price of the product. If Balance Practice has a simple layer of PU foam, then Orma Bonnell Roll has Ormafoam foam in this place. In general, the properties of the materials do not differ much from each other and provide optimal rigidity and comfortable support for the spine. But Ormatek used not just a smooth layer of foam as an interlayer, but a material with a convoluted “wave” cut, which made it possible to achieve a unique micromassage effect.

The felt layer acts as an insulator and protects the soft filling from springs. It also ensures even distribution of the load and guarantees comfort during rest. In addition, the felt gives the necessary rigidity. For both mattresses, it is medium, which is the best option and suits most people of average build: children, adults, and the elderly. However, at the maximum allowable load there are differences. In this regard, Ormatek is again in the lead, which can withstand up to 100 kg per bed, the competitor's figure is 90 kg. However, in both cases, with prolonged use, buyers note the effect of a hammock when part of the structure sags. For the manufacture of covers, manufacturers have chosen jacquard with padding stitching, so there is nothing to complain about here - everything is perfect.

Both options boast an excellent combination of price and quality. If you're on a tight budget, then Balance Practice is the best option. However, if you pay a little extra, you will get a mattress with a massage effect and better filling.

According to experts, this is one of the most optimal mattress designs. Each spring is here in a separate case made of dense non-woven material and is not connected to others. Such products are more expensive, but they support the spine better, evenly distribute the load over the surface, and provide an orthopedic effect. Due to this, the quality of sleep increases and the body recovers faster. Such spring mattresses are quite durable, do not emit extraneous sounds, absorb well and do not deform locally, unlike the classic Bonnel block. This is a great option for kids, adults and the elderly.

Both Russian firms use independent cylindrical springs in selected models. When exposed to a load, each of them is pressed separately, independently of the others. However number of springs different. For every square meter of Balance Forma, there are 256 springs (550 per bed). For comparison, Ormatek has only 210 of them in the Plain model (500 per seat). The load can withstand the same - up to 110 kg.

As top layer Ascona uses highly resilient polyurethane foam.It eliminates the slightest irregularities on the surface and perfectly passes air. Plain has an Ormafoam layer with a relief surface, which provides a massage effect and increases the level of comfort. For additional insulation of spring blocks, manufacturers use felt. Jacquard covers with synthetic winterizer lining delight with durability and wear resistance, ensuring a long service life. Rigidity both products have an average, but buyers complain that in both cases the surface seems quite soft.

Choosing a winner in this pair is the most difficult. Each product has its own advantages. According to the estimates, the winner is Balance Forma, one of the most popular models in the Ascona collection. This is a great option for a comfortable sleep, and for little money. The model contains 550 springs per seat and is considered universal in terms of stiffness. Plain has its advantages in terms of filler quality, but other things being equal, the product is still inferior to the competitor.

Incorrect position of the spine during sleep can lead to serious consequences: severe headaches, spasms, exacerbation of osteochondrosis and other similar diseases. This is due to the fact that the back muscles cannot fully relax without support. For these purposes, orthopedic mattresses were created, which differ from ordinary ones in a special design. They provide an anatomically correct position during sleep and adapt to the curves of the body. Such a mattress is simply necessary for those who already have back pain, and can also be useful for the prevention of spinal diseases.

Especially for these purposes, Askona, together with Professor and Doctor of Biological Sciences V.I. Dikulem has developed a separate line of Mediflex mattresses. These products are used in rehabilitation centers and are necessary during the recovery period after injuries and diseases of the spine. The series has passed a lot of clinical trials and is certified by Roszdravnadzor. The Mediflex Spine Balance model is one of the best in the line. This is a two-sided anatomical mattress with above average firmness. It has a block of independent springs of different diameters with 11 zones of elasticity: there are stiffer springs in the area of ​​​​the head and legs, and the softest ones in the middle of the mattress. Due to this, the surface perfectly adapts to the curves of the body and "point" supports the spine in the correct position. There are 550 springs per bed.

Coconut fiber increases the rigidity and elasticity of the product. It perfectly withstands increased loads, passes air well, is not subject to rotting or mold and will last a very long time. The MediFoam box reinforces the spring block and enhances the orthopedic effect.The material is completely hypoallergenic. From above there is a branded knitted fabric, also supplemented with anatomical MediFoam foam and hollotek. Due to this, the cover turned out to be durable, wear-resistant and very comfortable. In addition, the coating is treated with antimicrobial impregnation with silver ions, which normalizes blood circulation, improves sleep quality, and also maintains excellent thermoregulation at any time of the year. Another plus of the model is that there are no weight restrictions. The product can withstand a load of more than 140 kg per bed. When purchased with a protective case, the manufacturer offers a free extended warranty for 25 years, which speaks for itself.

Ormatek also has a separate line of orthopedic mattresses of different hardness - Orto Premium. We chose the Orto Premium Hard as it received the most positive reviews. This is a single sided high firmness mattress that does not need to be turned over. It is based, like the competitor's products, on a block of independent springs. They provide anatomical support for the body during sleep, and there are as many as 620 springs per bed.

This is followed by a layer of coconut coir, which increases the rigidity and increases the life of the model several times. Then comes the Ormafoam foam lining. It enhances the orthopedic properties and provides high elasticity of the bed. The top is again covered with coconut fiber, and the cover is made of delicate jersey and a small layer of Ormafoam. Due to such multi-layering, the manufacturer managed to achieve optimal rigidity and make the product as comfortable as possible. The box, as well as the Ascona products, is made of anatomical foam, due to which the design keeps its shape perfectly and does not slip, even when you sit on the edge of the bed.

There is no antibacterial impregnation here, but in general, the mattress is not very susceptible to the appearance of fungi or microbes - it is made of natural materials, is well ventilated and maintains an optimal microclimate. There are no weight restrictions either and the product can withstand a load of over 160 kg. Together with the product, the manufacturer encloses a medical certificate and, when purchased with a branded case, gives a guarantee of 25 years.

In this category, Ascona deservedly wins. Mediflex Spine Balance is an example of an orthopedic mattress. It was developed jointly with V.I. Dikul, who has experience in dealing with severe injuries and compression fractures of the spine. The products have been clinically tested and proven to be effective. In terms of orthopedic effect, the model from Ormatek, of course, is inferior, but it also has its obvious advantages. For example, the mattress is more convenient to use, because it does not need to be turned over. In addition, this time the manufacturer offers the best price, which for someone can be a decisive factor when buying.

Both manufacturers offer a large selection of mattresses for children. However, for a newborn, it is easiest to find a suitable option with Ormatek. Category 0-3 years here is represented by rigid orthopedic products, among which there are many oval models for newfangled cradles of non-standard shape. Ascona offers an excellent choice for children over 3 years old. The range includes high-quality spring and springless products with double-sided stiffness. A teenager can choose a mattress from any of these brands. For comparison, we took models with an independent spring block, which are ideal for preschoolers and children of primary school age.

Let's start with Ormatek, as many parents prefer the Kids Comfort mattress due to the fact that it has different sides of hardness. One is reinforced with a layer of coconut fiber and will provide proper support for the baby's spine from 3 to 6 years old. The second side has medium rigidity and is made with Ormafoam anatomical foam, which allows you to create comfortable conditions for a child of 6-12 years old.

The independent spring block includes 420 springs per bed, which provides optimal "point" support for the child's spine. The design is designed for loads up to 90 kg. There are three cover options to choose from: calico, jersey and jacquard.

The Askona Junior model is ideal for active and mobile children from 7 years old. It is also based on the independent spring block Minipocket, designed specifically for children. It provides healthy sleep, has excellent shock-absorbing properties and helps to quickly restore strength.There are 319 springs per berth, which is significantly less than that of a competitor. At the same time, they withstand the same load - up to 90 kg.

A layer of resilient anatomical EcoFoam creates a "spring" effect and provides additional rigidity. The linen layer also increases the elasticity of the surface and maintains a comfortable temperature. There is only one cover option. It is a combination of knitwear and hypoallergenic Hollotek fibers. This is a rather pleasant to the touch material that perfectly passes air and retains heat.

So, the winner in the category of children's mattresses is Ormatek Kids Comfort. This is an excellent and practical model with two different sides of rigidity, which is designed for both preschool children and older children up to 12 years old. In addition, the manufacturer offers a high-quality independent block for 420 springs and three cover options for little money - choose which one you like best.

Comparing the products of two Russian brands, it is difficult to come to certain conclusions. Askona was founded in 1990 and has been manufacturing sleep products for over 30 years. During this time, the company managed to establish itself in the market and receive the honorary title of manufacturer No. 1 in Russia. Ormatek is a younger company. The production was launched in 2001, but in 20 years it has managed to increase its turnover so as to compete with the sector leader.

We saw that both firms offer quality and comfortable products. The price level is approximately the same - in the line of each brand there are budget and premium models for various purposes. However, the best choice is within about 10,000 rubles. asks Ascona. At the same time, in terms of functionality and quality, the products of this company sometimes even surpass the more expensive products of a competitor. As a result, Ascona products look much better in many price categories. The company focuses on health, so even budget models contain an impressive amount of springs or high-quality hard filler to ensure an anatomically correct body position and optimal support for the spine during sleep.

Summing up, it is impossible not to notice that in some cases Ormatek products look more attractive. Some will prefer increased resistance to stress. Some people like the stylish design. Some models attract with ease of use - for example, one-sided options that do not need to be constantly turned over.

First of all, choose a mattress according to your requirements - in terms of quality, Ormatek and Ascona are approximately on the same level in any price segment.However, it is worth noting that children's and springless mattresses are more often bought from Ormatek - because of this, one gets the impression that their products are cheaper. In fact, the cost of the goods of the two competitors is quite comparable. It's just that Ascona's anatomical mattresses for adults are more popular - more expensive to manufacture.