20 best tile adhesives

If you are installing underfloor heating, you need a tile adhesive with the highest compression strength. It is he who is in front of us now. Here 1.5 megapascals, and this is a very high figure, telling us about the ability to withstand the highest loads on the surface. It will also withstand porcelain stoneware, but the breaking force here is lower than that of competitors, so we would recommend using a different brand for walls.

According to the characteristics, this is a confident middling. Complete drying of the mixture occurs in about a day at normal room temperature.It is possible to correct the laid tiles within 15 minutes after gluing. Well, the finished solution lives for 3 hours. Unfortunately, there are no outstanding features. Even the consumption is averaged up to 1.35 kilograms per square, and the layer thickness ranges from 2 to 15 millimeters. However, reviews about it are mostly positive, which means that the mixture corresponds to the declared characteristics.

When buying inexpensive tile adhesive, you often have to put up with the fact that it has different fractions in its composition. It has to be sieved or stirred for a long time, which takes time and effort. With this brand, you will not experience such problems. As real users write in reviews, uniformity is the main advantage of the mixture. The manufacturer indicates a value of 0.63 millimeters and these are all grains of sand in the bag.

As for other characteristics, you can’t call them any outstanding ones. Consumption is on average from 1.3 to 1.5 kilograms per square meter. Drying time - a day at room temperature, and adjustments can be made 3 hours after installation. The solution remains viable also for 3 hours. In general, it cannot be said that this glue is the best in some individual parameters. In addition, external work is inaccessible to him, although you can interact with him up to +5 degrees, which is not bad. In general, a confident average, but on the other hand, it is as homogeneous and holistic as possible both in dry form and in dissolved form.

The main advantage of universal glue is the possibility of its use in a variety of conditions. But some brands, although they are universal, behave differently depending on the environment. What can you say about this product. This is the best tile adhesive in terms of elasticity. It behaves perfectly for 3 hours after dilution and also maintains a uniform plasticity throughout this time.

Working with such a product is as convenient as possible, and given that it is moisture and frost resistant, it is also beneficial. No need to buy different brands for individual rooms or specific jobs. One mixture is enough. It can also be used outside the premises, and the operating temperature range here is from +2 degrees, that is, you can easily hang porcelain stoneware even in the cold season. The main thing is that there are no frosts. Well, there is no need to talk about the upper threshold. It's over 50 degrees. A truly versatile tile adhesive for all situations.

One of the best tile adhesives for universal use is Litoflex K80 from the Italian company Litokol. It is used by Russian finishers when they have to lay different types of tile materials. Glue will cope not only with fixing tiles indoors, it can also be used for outdoor work. The mixture is made on a cement basis, but thanks to the addition of synthetic resins, the manufacturer managed to achieve high elasticity of the seam.

Experts note high adhesion, moisture resistance, environmental friendliness.The scope of the product is wide, these are indoor walls and floors, stairs, terraces, balconies and facades. The adhesive penetrates deep into the base, therefore it is suitable for concrete, cement-sand, plasterboard bases, as well as for underfloor heating. Users praise Italian glue for the minimum amount of dust during operation, high quality material. The downside is the high price and shortage in the trading network.

Repair is a costly thing, and you want to save money without sacrificing quality. It doesn’t always work, but this tile adhesive will help you with this. This is the cheapest product on the market, which is surprising since it is not made in Russia. And the benefits don't stop at the price.

Also, the glue has a very large temperature range with a lower threshold of about -50 degrees. An excellent option for construction sites that have not yet been supplied with heating. Well, and, accordingly, it can be handled in winter if external work is carried out on the facade. True, we can not say about the shortcomings. For example, the time for complete drying here will be almost 2 weeks, and this is a lot. All other values ​​associated with this moment are also increased: the viability of the finished solution is 4 hours, and the time allotted for adjusting the tiles is almost half an hour.Ideal for leisurely work. Frost-resistant and strong enough, able to withstand even porcelain stoneware.

GOST is a requirement that every leader must fulfill, but this is far from always the case, and many brands manipulate the numbers. But not KM. This mixture strictly complies with standardization requirements, so it is often chosen by government contractors, who care about the declared quality, and not empty advertising promises.

As for the real parameters, this tile adhesive cannot be called the best. It is rather optimal. The approximate consumption of the mixture ranges from 1.3 to 1.4 kilograms per square. This is higher than competitors, but not by much. The viability of the finished solution is about 180 minutes, that is, as a standard. True, the time for adjustment is slightly higher than most, 20 minutes versus 15 minutes. Well, the foot load becomes available 24 hours after application. Adhesives are also available for outdoor use, and can also be installed on underfloor heating if your bathroom is equipped with one.

Before us is the best tile adhesive in terms of temperature resistance. Its lower threshold is at around -40 degrees, and the upper one is at +70. It is unlikely that you will ever meet such ranges in life, which means that the product has a large supply, which is never superfluous. Accordingly, the glue is frost-resistant even after application.He has a class F100, which tells us about the ability to safely endure at least one hundred cycles of freezing and thawing. And, of course, it can be used on underfloor heating or outdoor work.

At height and degree of resistance to compression, tear and bending. The glue perfectly tolerates high pressure and can be used in rooms with high traffic. It can easily withstand heavy porcelain stoneware and other finishing materials that are heavy. Well, it should be noted relatively economical consumption. One square meter will take about 1.25 kilograms of the finished mixture. Not a record figure, of course, but quite competitive.

Ceresit CM 17 Super Flex glue can handle any kind of mineral tiles. The product is reinforced with Fibre Force microfibres, which make the seam elastic and durable. The reinforcing mesh allows the use of the adhesive composition on the most difficult bases that are subject to vibration or mechanical stress. High adhesive properties significantly expand the scope, starting with concrete surfaces and ending with drywall. Since the main adhesive is cement, the composition can be used when performing outdoor work. Operating temperature range (-50...+70°C) is suitable for almost all regions of Russia.

In the reviews of domestic consumers, such epithets to the glue as "excellent glue", "Ceresit CM 17 - the best", "the most reliable" prevail. The tilers also describe the product's merits with admiration.But the high price is becoming a stumbling block for many Russian homeowners.

During renovations, there are situations where every minute counts, and then you need a tile adhesive with the lowest values ​​​​of drying, setting and adjustment. This is the product we have in front of us. To begin with, he has a very high pot life, 4 hours. But at the same time, only 10 minutes are allotted for adjustment, and full setting will occur after 6 hours. True, walking distance is still a day, but it doesn’t happen otherwise with cement bases.

The adhesive is not frost resistant and has few freeze cycles. But he has access to a bathroom and a kitchen. The mixture tolerates moisture perfectly, as well as sudden changes in temperature. We also note a high degree of compression, up to 6 megapascals. An ideal option for a warm floor, but it is better not to glue porcelain stoneware and other heavy materials on it. The values ​​for bending and stretching are much lower. Well, you can work with it only at standard room temperature, that is, from +5 to +30 degrees inclusive.

The most difficult premises in repair and construction are those where there is always high humidity and significant temperature fluctuations. Bath, swimming pool, kitchen and so on. This tile adhesive is the best for such places. It is the most reliable and high quality. Strongly fixes both light tiles and heavy porcelain tiles. In addition, it is frost-resistant, with a resistance class of F100. The mixture shows excellent results in tearing, compression and fracture. It can be used both on the floor and walls.

Special attention deserves such a parameter as the viability of the solution. After kneading, the mixture remains elastic and ready to use for 5 hours, which is a very impressive result. Accordingly, the adjustment time is higher than that of competitors. Here, up to 40 minutes are allotted for this, which makes it possible to work in a measured mode and prepare the solution in advance and in large volumes, and not knead it every few tiles.

In the wettest rooms for laying tiles, experts use Ceresit CM 11 Plus glue. Its amazing moisture resistance allows you to finish small indoor pools with tiled materials. Thanks to the introduction of a special elastic agent, the composition perfectly adheres to deformable bases (drywall, underfloor heating), ceramic cladding, young concrete, and cellular blocks. The master must knead such a volume of the solution that he can work it out within 2 hours. You can edit the tiles in the first 20 minutes after installation. Tilers consider 7-8 mm to be the optimal layer thickness.

In consumer reviews, positive assessments of the properties of the adhesive prevail. The composition is well-made, easy to apply, sets quickly, withstands high humidity. Users consider the disadvantage is the short shelf life of the mixture in the opened package.

Many flattering words from domestic tilers can be read on construction forums about Knauf Fliesen glue. One of the main advantages of the product, according to experts, is ease of use. The composition is made on a cement basis, it mixes well, after preparation it turns out to be plastic and obedient. With moisture and slip resistance, the adhesive is considered the best for tiling facades, walls of bathrooms and shower rooms. The mixture is suitable for the installation of ceramics, porcelain stoneware and other tile materials. The prepared solution must be worked out within 3 hours, and it is allowed to make adjustments to the position of the tile no later than 10 minutes.

Consumers appreciate Knauf Fliesen glue for its environmental friendliness, frost resistance and fast mixing. It is well made and affordable. There were no special complaints about the composition in the reviews.

Prices in the construction market are constantly breaking records, it is very difficult to calculate the cost of repairs even six months in advance. Fortunately, there are brands that always delight us with their pricing, such as Paladium. This is a Russian brand, the main purpose of which is the bathroom. Adhesive universal with high resistance to moisture and with high rates of tear and compression. It easily withstands heavy porcelain stoneware or mosaics. True, outdoor work is not available to him, but you should remember about his purpose, and it is unlikely that your bathroom is standing alone on the street.

In terms of parameters, this is a confident average. There are not enough stars from the sky, but he is definitely not an outsider either. According to some characteristics, it even outperforms its competitors. For example, according to the degree of viability of the solution. Here it is 4 hours, while most popular brands only offer 3 hours. But the adjustment time is very small, only 10 minutes. Not the most convenient option for work, and grouting is available and only after 2 days.

Savings is an important factor during renovation or construction, and none of us is alien to it. But savings can lie not only in the cost of a bag of mixture, but also in its consumption. However, both points work with this product. Firstly, for 25 kilograms you will pay about 600 rubles, which is already quite good by modern standards. Secondly, it has the lowest consumption. Just think, for a layer 15 millimeters thick, you will need only 1.29 kilograms of the finished mixture. Definitely the best score.

Note also that this is a heavy adhesive.It is suitable for porcelain tiles, mosaics and other materials where breaking load is important. Reviews about this product are as positive as possible, and some users even note that the characteristics indicated by the manufacturer are underestimated. For example, it is a frost-resistant adhesive with an F150 classification, but in practice it withstands many more freeze and thaw cycles. Well, the foot load becomes available much faster than after the indicated 24 hours.

GLIMS WhiteFix is ​​a high quality adhesive mixture based on white cement. Scope - for internal and external works on facing with natural stone, ceramic tiles (including transparent ones), mosaics, installation of glass blocks, etc. The presented composition demonstrates the best adhesive properties that allow laying tiles not only on a prepared surface, but also on top of an old one. tiles. The use of this adhesive when facing the walls of the bathroom allows you to apply the laying technology "from top to bottom" with simultaneous jointing of tile joints.

The finished solution is heat and frost resistant, withstands up to 50 cycles, due to which it is successfully used for facing terraces, balconies, outdoor pools, etc. The reviews note that GLIMS WhiteFix is ​​not prone to slipping, is economical in consumption and allows for 20 minutes. adjust the position of the tiles. This adhesive does not contain impurities harmful to human health and fully complies with environmental standards.

Many craftsmen consider Ceresit CM 115 to be the best tile adhesive for marble or mosaic cladding. Its main advantage is the perfectly white color of the seam after drying. Therefore, the mixture does not stain light stone slabs, marble or transparent mosaics. In addition to this property, experts highlight such positive aspects of the adhesive as environmental friendliness, the possibility of mounting on a warm floor, use for outdoor work, resistance to moisture.

The prepared solution retains its viability for 2 hours, and the primary setting occurs after 25 minutes. The thickness of the adhesive joint should be from 4 to 10 mm, then the tile will not slip during vertical installation. In the reviews, users note the perfectly white color of the seam, its strength and moisture resistance. But working with glue is not recommended for beginners. In addition, it is necessary to carefully prepare the base for cladding.

The average compressive strength of tile adhesives is about 0.5 megapascals. This is already enough to withstand ceramics and even granite, but the higher this figure, the better the glue. And now we have one of the most durable compounds on the market.Its compression ratio is 1 megapascal, and if you read the reviews, it becomes clear that the characteristic is underestimated, and quite significantly.

By the way, reviews are the only way to form an opinion about this product. Here the manufacturer decided to save on packaging, so it turned out to be as concise as possible and without unnecessary information. More precisely, not without superfluous, but without it at all. It remains to clarify the parameters on the official website, and they are as follows: the time of complete drying and walking distance is 24 hours. The pot life is 3 hours and the adjustment time is 10 minutes. Nothing outstanding. Standard data for adhesives of this type. The bathroom for the mixture is also not a hindrance. The composition is resistant to moisture, but does not like frequent freezing. Although outdoor work is its main purpose.

It is believed that outdoor work is the most expensive and difficult, but here you can find a way to save money. For example, buy this tile adhesive, which is not only very cheap in itself, but also has excellent consumption rates. One square meter of covered area will require from 0.4 to 1.3 kilograms of the mixture, and this is the best result among all competitors.

Also, this glue can be used indoors. If your bath is equipped with underfloor heating, you can lay tiles with this composition on top of it. It has excellent temperature performance and moisture resistance class. We also note the long viability of the prepared solution. It is 4 hours, which is an hour more than other brands. There is also plenty of time for adjustments. 20 minutes.Well, walking distance becomes relevant after about 24 hours at room temperature. This is no longer a record, but it is quite acceptable, especially if you are gluing porcelain stoneware or stone.

Rousean's high-performance Fixator tile adhesive has the best adhesion properties, making it suitable for tiling the most difficult surfaces. It quickly and reliably fixes tiles on metal, wood, the old layer of tiles and other surfaces on which work with other mixtures is problematic. The presented adhesive solution is successfully used for laying and gluing large-sized heavy materials such as glass blocks, porcelain stoneware, natural stone, wall panels, etc.

The finished mixture is characterized by optimal plasticity and retains this property for 30 minutes of open work. Due to the high resistance of this adhesive to maximum temperatures, it is often recommended in reviews for installing underfloor heating. The frost-resistant properties of the solution are quite high, and allow the use of Rousean Fixator for outdoor work, for example, for facing the facade walls of a building, or a porch of a house.

When laying tiles in sub-zero temperatures, Weber Ultra Fix Winter adhesive is the best choice. Even at -10°C, outdoor work can be carried out with high quality. Few of the competitors can boast of frost resistance (over 150 cycles).Such unique abilities were highly appreciated by Russian tilers, they recommend customers to buy this composition for decorating ramps, terraces, balconies and stairs with tiled materials.

The advantage of the mixture is high adhesion to various substrates, including waterproofing materials. The only exception is bituminous coatings. As for the specific composition of the tiles, the seam withstands large-format porcelain tiles, ceramics, artificial and natural stone. In the reviews, users express satisfaction with the frost resistance, plasticity and strength of the adhesive. The disadvantage of the composition is the high stickiness of the prepared solution.