Top 10 Shoe Adhesives

More than 10 years ago, the domestic company Rosel developed an excellent glue for shoes. In 2002, only instant adhesives were represented in the range, however, in 2008, contact and epoxy adhesives went on sale. To date, Contact is the second in the market in terms of the number of sales, second only to Moment. At the same time, the price of the first is much lower than the second.
The contact is suitable for bonding leather, rubber, ceramics, porcelain and many other materials. They are very good at repairing shoes. Glue ideally fills cracks and gaps. The contact is 100% fulfilling its functions. When all the recommendations indicated on the package are followed, the substance sticks “tightly”. Buyers speak about it only on the positive side.

Glue for shoes "Eva" fully justifies the characteristics declared by the manufacturer. Therefore, it deserves a place in our ranking. Consumers can not find a single flaw. Glue "tightly" seals and corner, side cuts and breaks in the fold. It stays on shoes for a very long time, keeping the damaged area from repeated damage.
"Eva" is waterproof. Doesn't run in the sun. Even oblique cuts stick with a bang. Moreover, the place of the cut after processing with glue is almost not noticeable.Buyers recommend "Eva" as the best adhesive that does its job perfectly, is economical and inexpensive. The shelf life is 2 years.

One of the most purchased and best means for gluing shoes. Instantly "grabs" the desired parts of the surface. The glue won't stain and dries quickly. Shoe repair masters actively recommend Secunda for use. After application, shoes can be worn in various conditions without fear of new damage. The product is resistant to alkali, grease and moisture. It consists of polyurethane, acetone, methyl ethyl ketone and various additives. It has a gel consistency and a transparent color.

The tube is small and convenient, users note easy use and fast action. In addition, the ridiculous price suits all buyers. A second will firmly seal the sole for a long time. The effectiveness and versatility of the adhesive pleases customers. After complete solidification, the product has no odor or color. It can also be used in various everyday tasks: to glue interior elements or to bring creative ideas to life. Despite all the above advantages, Secunda has negative sides - uneconomical use and a characteristic smell.

Henkel has made a gel adhesive specifically designed for shoes. Its main advantages are efficiency, economical consumption and ease of use. The gluing process is fast enough, which saves time. The tube contains only 3 grams of the substance, however, it lasts for a long time.
The glue is waterproof and elastic, and it also has high strength. Due to the consistency, it does not flow. This results in ease of use. A special thin nose allows you to apply glue with precision to those areas where repairs are required, and easily control the dosage. User reviews testify to the good quality of Moment. They say that glue does an excellent job not only with repairing shoes, but also with other repairs of leather goods.

Adhesive that is suitable for almost all materials. With it, you can stick air mattresses, boats, camping equipment, shoes, sports equipment and more. It connects things of heterogeneous origin - rubber with metal, plastic with wood, glass with leather. The tool perfectly tolerates temperature differences and holds securely at low and high rates - from -45 to +105 degrees. The sealant is the best way to glue the sole or upper part of the boots. A strong connection will allow you to wear shoes for more than one season.

Apply adhesive to both surfaces. Then he will quickly and reliably "grab". A prerequisite is a thin layer. Within 24 hours, the consistency completely hardens and dries. Heating the glue to a temperature of 70-80 degrees will help speed up the process. Customer reviews are mostly positive. They note a convenient tube and easy use. In the disadvantages column, you can find comments about a pungent odor.

Reliable product designed for bonding hard and soft materials. After application, it dries quickly.One of the most significant advantages is the resistance of the adhesive to moisture. When water gets in, it will not soften and will not lose its basic properties. It is most often used for shoes. UHU SCHUH & LEDER does not dry out for a long time and holds firmly, even at extremely high temperatures - up to +125 degrees.

The main rules before use: it is imperative that the shoes are clean and dry. It is recommended to apply a thin layer, if necessary, several times until a barely noticeable film is formed. Users note that the glue does not leave unwanted stains. In addition, it holds glued surfaces of paper, leather and others well. In addition to all the above advantages, the tool has some shortcomings that can be found in the reviews. The disadvantages include not the most convenient tube, as well as a sharp smell of glue.

Shoe glue, which is praised for its quality and reliability. The composition is based on polyurethane resins. Thanks to this, it quickly connects the surfaces of various materials and holds them firmly for a long period of time. Even the hard parts of shoes are subject to Desmokol. Often, it is used to seal the upper part of the shoes or the sole. Also suitable for plastic, metal or glass. It has water-repellent properties and plasticity.

Before use, it is necessary to prepare the product for application. It is recommended to clean the shoes from dirt, remove the remnants of the old dried glue and degrease the desired part of the surface. It is very important to apply the product in a thin layer and wait about 10 minutes before drying.If necessary, the procedure should be repeated until a film is formed. The glue does not require additional compression, it will be enough to firmly connect the desired parts. Customers are satisfied with the purchase and willingly recommend this adhesive. The only downside is the bad smell.

One of the best adhesives for shoes is Nairit. Numerous customer reviews tell about its effectiveness. Thanks to a wide range of bonded materials, Nairit can be used in various household areas. Adhesion strength depends on the technology of work and the specifics of the material.

In the course of work, Nairit forms a waterproof, elastic seam of high strength. If you need to process a large area, Nairit glue is an indispensable assistant, since the layer applied by it remains sticky for a long time. The substance is safe to use. It does not contain any narcotic solvents such as toluene. Glue can handle most materials in any combination. It can be leather, rubber, fabric, wood and much more. Gluing methods - hot and cold. With the first option, the product can be used after 4 hours, with the second - in a day.

An all-purpose adhesive that is mainly used for bonding leather, rubber, fiberglass, and is also suitable for shoe repair. After application, the product dries quickly enough and becomes elastic, which allows it not to crack or crack.For even application, it is recommended to use a brush. Usually you should leave the product to dry for a period of 12 hours. Then it will firmly glue the necessary parts.

This tool has earned a lot of positive comments in the reviews. This is due to the fact that it performs its function qualitatively and is easy to apply. Seam Grip will allow you to seal the damaged worn out sole and return the boots to a presentable appearance. The glue is waterproof, after drying, you can safely walk in the rain and not be afraid of the appearance of a new damage. Shoe repairers actively recommend Seam Grip for purchase. The only thing that can scare away is the high price.

Italian manufacturers have developed the highest quality glue. Today it is used in shoe production and leaves only the best impressions about itself. It is mainly intended for gluing leather materials with any other types of them. It also exhibits its properties well when applied to wood, glass and other surfaces. Long-term fixation of parts is not required - the glue “grabs” the necessary parts in a few minutes. It should be used at a temperature not lower than +17 degrees.

Degreasing and surface cleaning are recommended prior to use. The product is applied in 2-3 layers at intervals of 10 minutes. Shoes will be ready to wear after 4 hours, provided that the product is heated to a temperature of 90 degrees. KENDA Farben SAR 30E exhibits resistance to cold and heat, and also holds up well when exposed to water. Buyers note that the glue does not have a pronounced odor, which is a definite plus.And they consider the high cost as a minus.