12 best wood adhesives

The best glue of domestic production in our review was Moment Stolyar PVA Universal. It is an aqueous dispersion of PVA. With this adhesive, you can join different types of wood, as well as building materials such as plywood, MDF, fiberboard, chipboard, veneer, laminated paper. The parts must be pressed against each other for 15-20 minutes using a clamp or vice. The final holding time of parts before use is 24 hours. Wood glue does not stain wood, which expands the scope of its application. The composition can be used at a positive temperature in the range of +5...30°C.

Professional carpenters and home craftsmen distinguish such qualities of Moment PVA Joiner Universal glue as short setting time, strength, accessibility, transparency after drying. The disadvantages include the fear of moisture and low temperatures.

In order not to spoil the appearance of the parts to be glued, professionals prefer Krass PVA PVA D3 glue. It is suitable for joining different types of wood. The product is used in the production of garden and kitchen furniture, installation of parquet and laminate.The material is also in demand in the manufacture of windows, doors, timber, plywood, veneer and chipboard. Distinctive features of PVA glue are water resistance (class D3) and transparency of the dried layer. In addition, the seam has elasticity and strength. Thanks to its unique properties, it is possible to glue even raw wood. The composition does not contain organic solvents, which makes the material environmentally friendly.

Domestic carpenters speak flatteringly about such qualities of Krass PVA PVA D3 glue as water resistance, crystal transparency of the seam, elasticity, affordable price. The downside is the long drying time.

The waterproof adhesive Kleiberit 303.0 has the best technical characteristics. The material occupies a leading position in the construction market, its quality is time-tested. The high-quality product has universal properties, it can be used to fasten various types of wood, veneer and chipboard products. A distinctive feature is the ability to bond exotic and hardwoods. Parts should be pressed against each other for 6-10 minutes at a temperature of +10°C. After drying, the glue layer has a white color, and its frost resistance reaches -30°C.

Domestic consumers distinguish such properties of Kleiberit 303.0 PVA glue as water resistance, frost resistance, strength, setting speed. The disadvantages include the need for strict adherence to the requirements of the instructions.

Ready-to-use one-component polyurethane-based adhesive Akfix PA370 is able to quickly and efficiently glue wood to metal, concrete, foam, and various plastics. Ideal for repairing wooden boats, yachts and boats due to its resistance to water and aggressive environments. It should be borne in mind that during the drying process, the glue slightly increases in volume, improving the quality of the connection of porous materials.

The glue has proven itself well in the joinery industry in the manufacture of furniture, windows, doors or layer-by-layer gluing of wood in complex structures. To obtain the strongest possible connection, the ambient temperature should not be below +5°C, and the parts to be joined should be slightly moistened. Not dried adhesive residues are easily removed with acetone. The limiting temperatures at which the glue line does not lose its properties are from -40 to +100 degrees Celsius.

The Belgian SOUDAL 66A adhesive boasts the highest adhesion. It is a polyurethane compound that withstands harsh operating conditions. Super waterproof material allows you to glue any kind of wooden products, including wet ones. It can be used to join wood with most building materials, with the exception of PE and PP.During the curing process, the composition foams, due to which cracks and irregularities are filled. The strong seam keeps the working qualities in the wide range of temperatures (-30...+100 °C). High adhesive ability allows to apply glue at performance of the most difficult carpentry and joiner's works, both indoors, and outside.

Carpenters and joiners praise SOUDAL 66A for its excellent adhesion, high bond strength, and water resistance. Among the shortcomings, professionals distinguish a decent expansion and a high price.

The best universal adhesive in our review is Kleiberit 501.0 from Germany. The basis of the adhesive was a polyurethane composition, which gives the material properties such as moisture resistance and heat resistance. One-component composition is easy to use. It can be used not only for gluing two wooden elements. Various combinations of materials are possible, for example, PVC, mineral slabs, ceramics, concrete, etc. The glued units can be used not only indoors, but also outdoors in the rain or the scorching sun. The impeccable quality of the product is confirmed by international standards (DIN/EN 204, WATT 91). The seam finally hardens after 24 hours.

In the reviews of domestic users, positive statements prevail. Kleiberit 501.0 glue is easy to use, it does not drip, the connection is strong. But it is very difficult to wash hands from the adhesive composition, and good ventilation of the room is also required during operation.

Reliable universal means for gluing wood is EDP epoxy glue. It is very popular among professionals and amateurs due to its affordable price. It can be used to make new wood-based products or to repair broken pieces of furniture. The seam is characterized by high strength, no shrinkage, good adhesion, resistance to moisture. The only exceptions are items that have contact with food (dishes, countertops). EDP ​​glue has been tested for years, its properties do not raise doubts among consumers.

Among the advantages, domestic users note the low price of EDP glue, the exceptional strength and durability of its seam. Various fillers can be added to the composition. Of the minuses, a long hardening time, getting a muddy seam and inconvenience in work are distinguished.

The two-component adhesive Uhu plus endfest 300 possesses super-strong abilities. It is based on epoxy resin, which allows a wide range of materials to be glued to wood. The exception is glass, PP and PE parts. The adhesive cures within 90 minutes.Finally, the seam hardens within 12-24 hours, after which it acquires impact strength, aging resistance and moisture resistance. To obtain a high-quality working solution, it is necessary to mix both components according to the manufacturer's recommendations. After that, thorough mixing is carried out until a homogeneous mass is obtained. The prepared glue is applied with a brush or spatula.

Professionals and amateurs note a number of positive qualities of Uhu plus endfest 300 glue. First of all, super strength, resistance to mechanical stress, and moisture resistance stand out. The disadvantages of glue for many users is the need to prepare a working mixture.

Titebond Original Wood Glue was created for professional activities. The basis of the composition was an emulsion of aliphatic resin. After drying, the seam is durable, it has a transparent yellowish structure. The film is not afraid of exposure to water, it can withstand a strong shock load. The main purpose of the adhesive composition is the connection of wooden products. This product has proven itself especially well when gluing tenon-groove structures. The emulsion penetrates deep into the wood of different species, forming a strong bond. In addition to natural wood, this adhesive can be used with parquet, plywood, fiberboard and chipboard. It is convenient to use glue, because the film seizes immediately, and quickly hardens when pressed.

Many professional woodworkers and builders use Titebond Original Wood Glue, describing it as the best option for the job. The only downside is the high price.

A distinctive feature of Forbo 650 dispersed contact adhesive is its ability to withstand high dynamic loads on complex surfaces such as steps and walls. The adhesive has great versatility and is great for carpentry, allowing wood to be bonded to both absorbent and non-absorbent substrates.

The adhesive does not contain solvents and has low emissions. After application to the surface and its complete drying (about 1 hour), the parts to be glued should be joined. The quality of adhesion depends on the amount of glue applied, so for a uniform and optimal layer it is better to use the structural roller that comes with the kit. The thermosetting properties of the adhesive make it possible to separate the glued parts with a building hair dryer.

Quilosa Bunitex P-55 multifunctional adhesive is based on organic mixtures of polychloroprene with the addition of synthetic rubber and is able to create strong wear-resistant wood bonds with all types of industrial or household materials. This glue is very often used in carpentry when gluing wood products, chipboard panels, corrugated cardboard. In domestic use, glue is best suited for laying cork.

The adhesive should be applied to both surfaces, which must be dry, smooth and free from dust. If the surface is porous, it is recommended to apply a preliminary layer, which forms a homogeneous film, and glue the second layer. Once bonded, the adhesive sets instantly, but final strength is achieved after a few days. If all requirements are met, a high quality of the connecting seam is achieved, which does not lose its properties over time.

Among the huge selection of wood adhesive mixtures, the one-component Titebond III Ultimate is in highest demand among professional carpenters. They can be used for gluing any type of wood with various types of butt joints (thorn, groove, tongue, etc.). The glue has increased moisture resistance and at the same time is easily cleaned with water until it dries. The absence of toxic impurities makes it possible to use it in the manufacture of products in contact with food.

The glue is ideal not only for interior, but also for exterior work, withstanding high temperature changes after curing. Having the best adhesion density, exceeding the tree itself, it is possible to carry out the final processing of products without the risk of destruction of the structure, and the absence of abrasive impurities will preserve the cutting edge of the tool. According to its characteristics, Titebond III adhesive is the only composition that meets the ANSY TYPE 2 moisture resistance standard and, if the instructions are followed during operation, there should be no complaints about the quality of this product.