10 Best Outdoor Paints

For painting buildings located along roads and industrial areas, as well as plinths and facades of commercial and warehouse premises, it is worth choosing a paint that has a minimum susceptibility to pollution. These include siloxane-based paint from the Slovenian company Belinka. It has increased weather resistance and forms a layer that repels dirt and water, in addition, accidental dirt can be gently wiped off with a damp sponge. The material is suitable for application on all types of mineral surfaces - stone, brick, plaster, etc. The decorative and protective coating is vapor-permeable, so the appearance of condensate on it is excluded.

LKM is supplied both in white (B1) and in a translucent composition (B2, B3), which allows them to be tinted both in pastel and saturated colors. At the same time, buyers note that the shades of paints from different batches are indistinguishable, since automated lines with accurate dosing of components are used in production.It can be applied with a brush with synthetic bristles, roller or spray gun, diluting the emulsion with water to create a base layer. The second layer can be applied only after 12 hours, the same time is necessary for the complete coating to dry. Both professional builders and ordinary users characterize this paint very positively, but they advise buying it in reputable stores - if it is frozen due to storage in improper conditions, it will crumple during outdoor work.

In 2013, the paints and varnishes of the domestic enterprise VGT were used in the construction of the Fisht Olympic Stadium in Sochi. Meanwhile, the history of the brand began in 1992, and 10 years was enough for him to become famous throughout Russia. It is not necessary to look for the reasons for the popularity for a long time: acceptable quality and competitive prices. For example, one of the company's best products, facade paint VD-AK-1180, costs less than 200 rubles. per 1 kg (the larger the volume, the cheaper), and has a wide range of positive characteristics. Firstly, it can be used not only for outdoor work, but also for indoor, which significantly reduces the cost of purchasing and delivering paintwork materials during major repairs.

The second important point: the paint has excellent adhesion to concrete, plastered and brick surfaces, it can also be used to paint plasterboard, fiberboard and wallpaper for painting, which means that you do not need to purchase different materials. Coloring can be carried out in winter, but at normal humidity and at a temperature not lower than -10 °.Drying occurs at an average pace - at room conditions for 2 hours ("until tack"), while the coating gains full strength after 2 weeks. Painters and end users confirm that it is light, water and weather resistant, and the snow-white or tinted color lasts a very long time. True, recently the quality of the paint is very dependent on where it was purchased, so it is better to go to trusted stores for a purchase.

Facade paint from the famous German brand Dufa brand 90 is an acrylic mixture with the addition of latex. It is designed to protect and decorate facade walls made of the most popular materials: concrete, brick, plaster, etc. It can also be used for interior work, such as painting the ceiling. Thanks to the modified composition and the correct consistency, the paint is well taken on the brush, does not flow, does not splatter when applied. The basic color is white, but tinting is possible according to the main color palettes (RAL, Farbe, Leber), so customers can choose from thousands of different colors and shades that remain unchanged for several years.

In addition to the fact that there is no hassle with applying paint, it pleases with high hiding power. The technical specifications state: in order to obtain a high-quality coating, it is necessary to stock up on material at the rate of 100 ml per 1 sq. m. The reviews confirm that such an expense is quite true.However, there are quite strict requirements for preparing the surface for painting, and in most cases a preliminary priming with a deep penetrating composition is recommended. But the efforts and costs are justified by the long-term service life of both the coating itself and the base under it.

At first, this paint is looked at with distrust - it’s painfully ridiculous for her price. But, apparently, miracles do happen, because the material has a snow-white color, does not smell, lays down in a dense layer without streaks, and dries quickly. In general, he really "behaves" as well as his more eminent and more expensive counterparts. Although, if you get to know the manufacturer better, a lot becomes clear: more than 10 years ago, the Tex company was bought by the Finnish giant Tikkurila, so the rumors that these paints are bottled at the same plant are quite fair.

Due to its excellent water resistance, the paint can be safely used for outdoor work, for example, for finishing facades, slopes, concrete fences, etc. Also, construction organizations often use it for painting walls in kitchens, baths, and covered verandas. Contrary to many fears, the cheapness of the material is not offset by increased consumption: a liter can cover 8-10 square meters. m. surface, that is, one bucket with a volume of 13 liters is designed for an area of ​​​​up to 10 square meters. m. For an ideal result, it is better to apply the paint in 2-3 layers, between which you need to pause for 1-2 hours.

Dulux products (this brand, like Hammerite, belongs to the AkzoNobel concern) are known all over the world: in Belgium under the name Levis, in the Netherlands - Flexa, in Spain - Bruguer. It is recognized by the unified packaging style with a photo of a bobtail dog, which has been the “face” of the company since 1961 and a symbol of family values. Bindo Facade paint consists of a latex emulsion and special additives that prevent the development of fungal colonies and the appearance of salt stains on the surface. The latex component is responsible for the elasticity, tightness and vapor permeability of the finished coating.

The paint is valued by builders because it is harmless, easy to apply and very economical: the average consumption is 1 liter per 12-14 square meters. m. The material is quite versatile and suitable for working with almost all external surfaces - concrete, slate, building blocks. Nevertheless, it is better not to use it for interior painting of walls and ceilings in wet rooms, since latex paints are inferior to acrylic in moisture resistance. But they are perfectly washable, so they should be used for finishing surfaces that get dirty quickly, for example, plinths.

Grates, fences, stairs, drainpipes and garage doors - any metal structure sooner or later rusts. Of course, it is better to prevent the development of corrosion, but what if it does appear? Choose Hammerite paint and be sure that rust will not bother you again for at least 5 or even 8 years.Most notably, no stripping of damaged metal or priming is required: thanks to the unique 3 in 1 formula, outdoor work is limited to applying paint directly over rust spots on painted or unpainted surfaces.

The material can be used not only for ferrous metal - the manufacturer allows painting wood, plastic, glass, tiles, copper both outside and inside the room. The painter does not need any special tools - all you need is a brush, roller or spray gun. After 4-6 hours, the next layer can be applied, although most users are limited to one. As a result of processing, a reliable elastic coating is created that is resistant to heating up to 80 ° C and atmospheric precipitation, with water and dirt-repellent properties. Moreover, it creates an unusual decorative effect, very similar to powder coating. The color palette consists of 11 actual colors in a muted range - aesthetes definitely have plenty to choose from.

In order to avoid the appearance of condensate and the start of decay processes, wooden facades and facade insulation systems require a high vapor permeability of the finish coating. Acrylic facade paints are considered the best in all respects, but, unfortunately, they provide low diffusion. Silicone materials are vapor-permeable, but do not always provide an acceptable level of moisture protection. But their combination - silacryl - makes it possible to combine the best properties of acrylate and silicone resins.So, thanks to the mixed composition, Muresko-Premium paint gives a coating that is very resistant to weathering, the appearance of efflorescence (white plaque on the walls), the development of algae and fungal colonies.

In one layer on a smooth surface, 200 ml of material is consumed. On rough plaster, the consumption is higher, but if there is a beautiful structure, it can be emphasized by slightly diluting the paint with water. It is recommended to apply it with a brush or roller, while airless spraying should be abandoned due to the presence of substances that are unsafe for living organisms. These components are necessary to impart bioprotective properties to the material. From the reviews, we learned that the paint in the bucket is initially thick, the layer is quite thick and reliable, there is no smell, so painting does not create discomfort.

For outdoor woodwork, it is important to choose a paint that creates a thick elastic layer. Among other requirements, it must withstand the physical expansion of the base during temperature changes without cracking and delamination. Oil emulsions were previously considered such paints, but due to the pungent odor and prolonged drying, they have practically ceased to be used. However, the Finns managed to develop a material that consists of acrylate and natural oil (the manufacturer does not disclose which one), but devoid of the shortcomings of its predecessors.

The smell of Pika-Teho paint is almost completely absent, it dries in 2-4 hours (under normal conditions), in addition, the coating is durable (20 years, according to the manufacturer) and resistant to light. At first glance, the material seems expensive, but when calculating, you need to take into account its low consumption - 4-8 square meters. m/l. In addition, for priming the surface with the first layer, the paint can be diluted with water at the rate of 0.5–1 l for every 10 l of paintwork materials. It is not worth neglecting the application of a primer layer, because the expense for the next layer will be much more economical, and the coating will be more reliable.

The water-based acrylic mixture from the famous Finnish company Teknos, which turned 70 this year, received a gold medal in 2007 at the largest industry exhibition Interlakokraska-2007. The material is intended for finishing wooden exterior surfaces and has all the necessary characteristics, namely, high resistance to abrasion, thermal expansion and UV radiation. It is a pleasure to work with such paint, since it does not smell by itself, it is diluted with plain water (up to 10%), it quickly seizes with the base and dries “tack free” in just 20 minutes. The composition can be applied both with a brush and with an airbrush, and in both cases the composition is consumed very sparingly: 1 liter is enough to paint 5–6 square meters. m. sawn board or 8-10 sq. m. planed.

The coating is elastic, uniform, with a beautiful glossy sheen.The Core&Shell technology, which is used to produce this paintwork material, makes it possible to ensure the safety of its operational properties for 15–20 years. Indeed, as the reviews testify, even the bright colors of the facades do not fade for a long time under the sun's rays. Contaminants practically do not stick to a smooth surface, and if necessary, they are easily removed with a brush. Thus, the wooden structure takes on a new look for a long time and receives reliable protection against moisture and mold.

In the 20s of the last century, the Tikkurila factory produced a unique varnish for women's hats, after which they became waterproof. Perhaps it was this lacquer that became the predecessor of the Euro Facade Aqua matte facade paint. But be that as it may, external surfaces, whether concrete, brick or fiber cement panels, it protects exceptionally well - not for nothing is it called the "queen of paints". Due to the presence of silicone in the composition of the painted facade, waterlogging and the appearance of fungi are not threatened. Acrylic base at the same time ensures the durability of the coating and color fastness.

The material lays flat on the prepared surface, so that both a professional and a home master can paint it. To do this, they do not need special equipment, it is enough to get a paint roller, brush or sprayer. If the surface is even, 1 liter of water-dispersion emulsion can be spread over approximately 8 square meters. m., and to process the rough wall of the material, it will take twice as much.The required shade can be selected according to the Tikkurila Facade, Stone Facades and Facad 760 catalogs, and it is better to do this on modern equipment in one of the Color Studios.